References
- Rubio-Marcos, F., Romero, J.J., Navarro-Rojero, M.G., Fernandez, J.F., Effect of ZnO on the structure, microstructure and electrical properties of KNN-modified piezoceramics, J. Eur. Ceram. Soc., 2009, 29(14): 3045–3052
- Comas, T.F., Diao, C., Ding, J., Williams, S., Zhao, Y., A passive imaging system for geometry measurement for the plasma arc welding process, IEEE Trans. Ind. Electron., 2017, 64(9): 7201–7209
- Zhao, Y.X., Wang, M.R., Cao, J., Song, X.G., Tang, D.Y., Feng, J.C., Brazing TC4 alloy to Si3N4 ceramic using nano-Si3N4 reinforced AgCu composite filler, Mater. Des., 2015, 76: 40–46
- Zhou, Y., Sun, Z., Electronic structure and bonding properties of layered machinable Ti2AlC and Ti2AlN ceramics, Phys. Rev. B., 2000, 61(19): 12570
- Shu, F., Numerical simulation and experimental study on rapid preparation of copper coating on AlN ceramic surface [D]. Harbin Institute of Technology, Harbin, 2010 (In Chinese)
- Liu, D., Chen, N., Song, Y., Song, X., Sun, J., Tan, C., et al., Mechanical and heat transfer properties of AlN/Cu joints based on nanosecond laser-induced metallization, J. Eur. Ceram. Soc., 2023, 43(5): 1897–1903
- Schreck, S., Rohde, M., Local modification of ceramic surfaces by a laser induced cladding process [C]. Conference on laser-based micro- and nanopackaging and assembly III; 20090128-29; San Jose, CA(US). Forschungszentrum Karlsruhe GmbH, Institute for Materials Research I, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein, Germany; Forschungszentrum Karlsruhe GmbH, Institute for Materials Research I, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein, Germany, 2009
- Lei, J., Shi, C., Zhou, S., Gu, Z., Zhang, L.C., Enhanced corrosion and wear resistance properties of carbon fiber reinforced Ni-based composite coating by laser cladding, Surf. Coat. Technol., 2018, 334: 274–285
- Yang, Z.W., Zhang, L.X., Xue, Q., He, P., Feng, J.C., Interfacial microstructure and mechanical property of SiO2-BN ceramics and Invar joint brazed with Ag-Cu-Ti active filler metal, Mater. Sci. Eng. A., 2012, 534: 309–313
- Wang, J.X., Chuang, K.H., Wu, Y.C., Mechanical performances of AlN/Al metallized ceramic substrates fabricated by transient liquid phase bonding and pre-oxidation treatment, Ceram. Int., 2022, 48(12): 16619–16629
- Zhao, J., Wang, X., Shu, F., Jiang, S., Ma, P., Zhao, Y., et al., Research on microstructure of copper coatings on AlN ceramic surface by laser cladding and brazing, Mater. Res. Express, 2020, 7(7): 075104
- Xiong, L.D., Wang, C.J., Wu, W., Xu, L.J., Wang, C.M., Deng, H., et al., The surface softening mechanism of AlN ceramic by laser treatment, Surf. Interfaces, 2024, 46: 104023
- Singleton, M.F., Nash, P., Binary alloy phase diagrams, 2nd ed. (Ed. T.B. Massalski), ASM International, Tennessee, USA, 1990
- Zhang, M.H., Zhao, C., Bai, J.M., Hu, Z.Y., Cai, J.W., Zhang, Z.R., et al., Enhancing thermal conductivity of AlN ceramics via vat photopolymerization through refractive index coupling and oxygen fixation, Addit. Manuf., 2024, 95(5): 104522