Measurement Uncertainty in Testing of Uniaxial Compressive Strength and Deformability of Rock Samples
By: D. Kuhinek, I. Zorić and P. Hrženjak
Open Access
|Sep 2011References
- Bieniawski, T. et al. (1979). Suggested methods for determining the uniaxial compressive strength and deformability of rock materials., 16 (2), 137-140.
- Fairhurst, C. E., Hudson, J. A. (1999). Draft ISRM suggested method for the complete stress-strain curve for intact rock in uniaxial compression., 36, 279-289.
- American Society for Testing and Materials. (2010).West Conshohocken, USA.
- American Society for Testing and Materials. (2002).West Conshohocken, USA.
- American Society for Testing and Materials. (2002).West Conshohocken, USA.
- European Committee for Standardization. (2009).Brussels, Belgium.
- European Committee for Standardization. (2004).Brussels, Belgium.
- American Society for Testing and Materials. (2008).West Conshohocken, USA.
- International Standardization Organization. (2009).Geneva, Switzerland.
- Jumikis, A. R. (1983)., 2 Ed. Trans Tech Publications.
- Gercek, H. (2007). Poisson's ratio value for rocks., 44, 1-13.
- Yadav, S., Gupta, V. K., Prakash, O., Bandyopadhyay, A. K. (2005). Evaluation of associated uncertainties in calibration of direct pressure indicating electromechanical devices., 5 (3), 104-114.
- Joint Committee for Guides in Metrology. (2006).BIPM. Sèvres, France.
- International Standardization Organization. (1995).Geneva, Switzerland.
- European Co-operation for Accreditation. (1999).
- Flack, D. (2001). Calipers and Micrometers. In MeasurementTeddington, Middlesex, UK: National Physical Laboratory.
- Lord, J. D., Morrell, R. M. (2010). Elastic modulus measurement-obtaining reliable data from the tensile test., 47, S41-S49.
- International Atomic Energy Agency. (2008).Wienna, Austria.
- Dumanić, E., Sekulić, D. (2001). Measurement uncertainty of test method for concrete cubes tensile strength. In, 8-10 October 2001. Cavtat, Croatia, 138-141.
- Bahn, G. W., Kim, J. J., Lee, H. M., Huh, Y. H. (2010). Establishment of traceability in the measurement of the mechanical properties of materials., 47, S32-S40.
- Gabauer, W. (2000).Linz, Austria.
DOI: https://doi.org/10.2478/v10048-011-0021-2 | Journal eISSN: 1335-8871
Language: English
Page range: 112 - 117
Published on: Sep 21, 2011
Published by: Slovak Academy of Sciences, Institute of Measurement Science
In partnership with: Paradigm Publishing Services
Publication frequency: Volume open
Related subjects:
© 2011 D. Kuhinek, I. Zorić, P. Hrženjak, published by Slovak Academy of Sciences, Institute of Measurement Science
This work is licensed under the Creative Commons License.