Measurement Uncertainty in Testing of Uniaxial Compressive Strength and Deformability of Rock Samples

D. Kuhinek; I. Zorić; P. Hrženjak

doi:10.2478/v10048-011-0021-2

.blurhash-client-img { display: none !important; }

Measurement Uncertainty in Testing of Uniaxial Compressive Strength and Deformability of Rock Samples

Measurement Science Review

Volume 11 (2011): Issue 4 (August 2011)

By: D. Kuhinek, I. Zorić and P. Hrženjak

Open Access

|Sep 2011

Abstract

This paper describes instrumental measurement uncertainties and their influence on the result obtained from determination of rock sample uniaxial compressive strength and deformability. The interdependence of uncertainty contribution is analyzed and guides for improving measurement uncertainty are given. The achieved uncertainties are compared to typical uncertainties in the determination of concrete and metallic material compressive strength and deformability.

References

Bieniawski, T. et al. (1979). Suggested methods for determining the uniaxial compressive strength and deformability of rock materials. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 16 (2), 137-140.10.1016/0148-9062(79)91450-5
Search in Google Scholar
Fairhurst, C. E., Hudson, J. A. (1999). Draft ISRM suggested method for the complete stress-strain curve for intact rock in uniaxial compression. International Society for Rock Mechanics and Mining Sciences, 36, 279-289.
Search in Google Scholar
American Society for Testing and Materials. (2010). ASTM D7012 - 10 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens Under Varying States of Stress and Temperatures. West Conshohocken, USA.
Search in Google Scholar
American Society for Testing and Materials. (2002). ASTM D3148-02 Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression. West Conshohocken, USA.
Search in Google Scholar
American Society for Testing and Materials. (2002). ASTM D2938-95 Standard Test Method for Unconfined Compressive Strength of Intact Rock Core Specimens. West Conshohocken, USA.
Search in Google Scholar
European Committee for Standardization. (2009). EN 12390-3: Testing Hardened Concrete-Part 3: Compressive Strength of Test Specimens. Brussels, Belgium.
Search in Google Scholar
European Committee for Standardization. (2004). EN 10002-1: Metallic Materials-Tensile Testing: I. Method of Test at Ambient Temperature. Brussels, Belgium.
Search in Google Scholar
American Society for Testing and Materials. (2008). ASTM E8/E8M-08: Standard Test Methods for Tension Testing of Metallic Materials. West Conshohocken, USA.
Search in Google Scholar
International Standardization Organization. (2009). ISO 6892-1: Metallic Materials-Tensile Testing: I. Method of Test at Room Temperature. Geneva, Switzerland.
Search in Google Scholar
Jumikis, A. R. (1983). Rock Mechanics, 2 Ed. Trans Tech Publications.
Search in Google Scholar
Gercek, H. (2007). Poisson's ratio value for rocks. International Journal of Rock Mechanics and Mining Sciences, 44, 1-13.10.1016/j.ijrmms.2006.04.011
Search in Google Scholar
Yadav, S., Gupta, V. K., Prakash, O., Bandyopadhyay, A. K. (2005). Evaluation of associated uncertainties in calibration of direct pressure indicating electromechanical devices. Measurement Science Review, 5 (3), 104-114.
Search in Google Scholar
Joint Committee for Guides in Metrology. (2006). Evaluation of Measurement Data-Supplement 1 to the "Guide to the Expression of Uncertainty Measurement"-Propagation of Distributions Using Monte Carlo Method, Final Draft. BIPM. Sèvres, France.
Search in Google Scholar
International Standardization Organization. (1995). Guide to the Expression of Uncertainty in Measurement. Geneva, Switzerland.
Search in Google Scholar
European Co-operation for Accreditation. (1999). EA 4/02 Expression of the Uncertainty of Measurement in Calibration.10.1007/s007690050328
Search in Google Scholar
Flack, D. (2001). Calipers and Micrometers. In Measurement Good Practice Guide No. 40. Teddington, Middlesex, UK: National Physical Laboratory.
Search in Google Scholar
Lord, J. D., Morrell, R. M. (2010). Elastic modulus measurement-obtaining reliable data from the tensile test. Metrologia, 47, S41-S49.10.1088/0026-1394/47/2/S05
Search in Google Scholar
International Atomic Energy Agency. (2008). IAEA-TECDOC-1585 Measurement Uncertainty-A Practical Guide for Secondary Standards Dosimetry Laboratories. Wienna, Austria.
Search in Google Scholar
Dumanić, E., Sekulić, D. (2001). Measurement uncertainty of test method for concrete cubes tensile strength. In Proceedings of the 18^th Metrology Symposium, 8-10 October 2001. Cavtat, Croatia, 138-141.
Search in Google Scholar
Bahn, G. W., Kim, J. J., Lee, H. M., Huh, Y. H. (2010). Establishment of traceability in the measurement of the mechanical properties of materials. Metrologia, 47, S32-S40.
Search in Google Scholar
Gabauer, W. (2000). UNCERT Code of Practice 07: The Determination of Uncertainties in Tensile Testing. Linz, Austria.
Search in Google Scholar

Articles in this issue

DOI: https://doi.org/10.2478/v10048-011-0021-2 | Journal eISSN: 1335-8871

Journal RSS Feed

Language: English

Page range: 112 - 117

Published on: Sep 21, 2011

Published by: Slovak Academy of Sciences, Institute of Measurement Science

In partnership with: Paradigm Publishing Services

Publication frequency: Volume open

Keywords:

uniaxial compressive strength,

Related subjects:

Electrical engineering,

Control engineering, metrology and testing

© 2011 D. Kuhinek, I. Zorić, P. Hrženjak, published by Slovak Academy of Sciences, Institute of Measurement Science
This work is licensed under the Creative Commons License.

Volume 11 (2011): Issue 4 (August 2011)