References
- Backstrom, M. G., Lovstrand, K. G. (2004). Susceptibility of electronic systems to high-power microwaves: Summary of test experience. IEEE Transactions on Electromagnetic Compatibility, 46 (3), 396–403.
https://doi.org/10.1109/TEMC.2004.831814 - You, G., Wie, L., Zhou, S. (2020). Electromagnetic protection design and testing and rectification of VPX chassis. Safety and Electromagnetic Compatibility, 6, 55–59.
- Jongjoo, S., Dong, G. K., Jong, H. K., Joungho, K. (2010). Circuital modeling and measurement of shielding effectiveness against oblique incident plane wave on apertures in multiple sides of rectangular enclosure. IEEE Transactions on Electromagnetic Compatibility, 52 (3), 566–577.
https://doi.org/10.1109/TEMC.2009.2039483 - Gong, Y. F., Hao, J. H., Jiang, L. H. et al. (2018). An analytic model of double-cavity electromagnetic leakage based on Bethe small hole coupling theory and the mirror principle. Journal of Electrical Technology, 33 (09), 2139–2147.
- Solin, J. R. (2011). Formula for the field excited in a rectangular cavity witha small aperture. IEEE Transactions on Electromagnetic Compatibility, 53 (1), 82–90.
https://doi.org/10.1109/TEMC.2010.2053711 - Zhang, Y., Tian, Z., Wang, C., Yang, Q., Wang, S. (2022). Research on the variation of shielding effectiveness of double-layer shielding enclosure with the position and number of apertures. Transactions of China Electrotechnical Society, 37 (13), 3350–3360.
https://doi.org/10.19595/j.cnki.1000-6753.tces.210988 - Wang, D., Shi, C., Cai, X., Yi, Z. (2019). Research on the shielding effectiveness of rectangular cavitywith embedded thin plate under HEMP irradiation. Journal of Microwaves, 35 (1), 87–90.
https://doi.org/10.14183/j.cnki.1005-6122.201901017 - Kraft, C. H. (1994). Modeling leakage through finite apertures with TLM. In Proceedings of IEEE Symposium on Electromagnetic Compatibility. IEEE, 73–76.
https://doi.org/10.1109/ISEMC.1994.385681 - Hao, J. H, Jiang, L. H, Qian, S. Y. (2020). Efficiency of built-in media plate based on BLT equation. Journal of Electrical Technology, 35 (18), 3791–3801.
- Dahlang, T., Sultan, I., Bualkar, A., Bidayatul, A., Hee, J. K. (2018). Electronic properties of composite iron (II, III) oxide (Fe3O4) carbonaceous absorber materials by electron spectroscopy. Journal of Electron Spectroscopy and Related Phenomena, 229, 47–51.
https://doi.org/10.1016/j.elspec.2018.09.008 - Hou, Y., Cheng, L., Zhang, Y., Deng, C., Yang, Z., Chen, Q., Wang, P., Zheng, L. (2017). Electrospinning of Fe/SiC hybrid fibers for highly efficient microwave absorption. ACS Applied Materials & Interfaces, 9 (8), 7265–7271.
https://doi.org/10.1021/acsami.6b15721 - Jia, R. F., Yin, B. L., Zhang, G. H. et al. (2022). Development and characteristics of polytetrafluoroethylene electromagnetic shielding composite film. Journal of Engineering, 43 (11), 2916–2923.
- Wang, Y. W., Wang, Y. P., Chen, M. J. et al. (2020). Preparation and microwave absorption properties of Ni/RGO composites. Journal of Anhui University of Technology, 34 (5), 71–75.
- Bideskan, M. Z., Forooraghi, K., Atlasbaf, Z. (2021). Method of lines for analysis of plane wave scattering by periodic arrays of magnetically-biased graphene strips. Scientific Reports, 11, 7588.
https://doi.org/10.1038/s41598-021-86882-z - Li, M., Nian, H. (2024). Perturbation amplitudes design method based on confidence interval evaluation for impedance measurement. IEEE Transactions on Industrial Electronics, 71 (10), 12323–12337.
https://doi.org/10.1109/TIE.2024.3352148 - Jackson, J. D. (1998). Classical Electrodynamics, 3rd Edition, Wiley, ISBN 978-0471309321.
- Pozar, D. M. (2011). Microwave Engineering, 4th Edition. Wiley, ISBN 978-0-470-63155-3.
- Andrews, J. R. (2003). UWB signal sources, antennas and propagation. In 2003 IEEE Topical Conference on Wireless Communication Technology. IEEE.
https://doi.org/10.1109/WCT.2003.1321594 - Walter, M. W. (2023). Mode matching analysis of waveguide discontinuities. In IEEE MTT-S International Symposium. IEEE.
- Yan, F., Liu, X. H., Wang, P. et al. (2019). Shielding effectiveness of metallic cavities with different aperture arrays in high intensity radiated field. Electronics Optics and Control, 26 (8), 90–94.
- Ramo, S., Whinnery, J. R., Van Duzer, T. (1994). Fields and Waves in Communication Electronics, 3rd Edition. Wiley, ISBN 978-0-471-58551-0.
- Hy, J. (2023). Preparation of dielectric/magnetic loss doped graphene aerogel and its microwave absorbing properties. Thesis, Zhengzhou Institute of Aeronautical Industry Management, Zhengzhou, China.
- Tan, H. B. (2011). The electromagnetic shielding effectiveness of SiC with cobalt coating by electroless plating. Shandong Ceramics, 34 (1), 14–16.
- Gao, X., Su, J., Liu, H., Zhang, L., Chen, M. (2016). Design and electromagnetic performance analysis of new absorbing materials. Chinese Journal of Power Sources, 40 (7), 1467–1468+1500.
- China Electronics Standardization Institute. (2018). Specification for rubber-based wave absorbing plate. SJ 21488-2018.
- Liu, W., Xiong, J., He, S., Luo, G., Xia, L., Lan, X. (2022). Ultra wideband graphene foam absorbing materials with multilayer structure design. Journal of Ordnance Equipment Engineering, 43 (2), 197–203.