Verification of Coordinate Measuring Machine Using a Gauge Block

Tóth, Teodor; Dovica, Miroslav; Buša, Ján; Buša, Ján

doi:10.2478/msr-2024-0030

Abstract

Two orthogonal least squares methods of the points approximation by a set of parallel planes are presented. Such an approximation can be used to study the measurement details of using a coordinate measuring machine (CMM). A calibrated gauge block and a CMM with a touch measuring probe were used in the experimental verification. A comparison of the different CMM strategies is provided.

References

Adamczak, S. (2023). Metrologia geometryczna powierzchni technologicznych (1st ed.). Wydawnictwo Naukowe PWN, ISBN 978-83-01-23296-2.
Search in Google Scholar Back to article
Johnson, R., Yang, Q., Butler, C. (1998). Dynamic error characteristics of touch trigger probes fitted to coordinate measuring machines. In IMTC/98 Conference Proceedings. IEEE Instrumentation and Measurement Technology Conference. Where Instrumentation is Going (Cat. No.98CH36222). IEEE, 2, 1104–1109. https://doi.org/10.1109/IMTC.1998.676895
Search in Google Scholar Back to article
Edgeworth, R., Wilhelm, R. G. (2023). Uncertainty management for cmm probe sampling of complex surfaces. In ASME 2023 International Mechanical Engineering Congress and Exposition. ASME, 511–518. https://doi.org/10.1115/IMECE1996-0821
Search in Google Scholar Back to article
Lee, M., Cho, N.-G. (2013). Probing-error compensation using 5 degree of freedom force/moment sensor for coordinate measuring machine. Measurement Science and Technology, 24(9), 095001. https://doi.org/10.1088/0957-0233/24/9/095001
Search in Google Scholar Back to article
Han, Z. L., Yuan, M. X. (2013). Research on the vector measure method of coordinate measuring machine. In Key Engineering Materials, 561, 572–575. https://doi.org/10.4028/www.scientific.net/KEM.561.572
Search in Google Scholar Back to article
Drbúl, M., Czán, A., Šajgalík, M., Piešová, M., Stępień, K. (2017). Influence of normal vectors on the accuracy of product’s geometrical specification. Procedia Engineering, 192, 119–123. https://doi.org/10.1016/j.proeng.2017.06.021
Search in Google Scholar Back to article
Yang, Q., Butler, C., Baird, P. (1996). Error compensation of touch trigger probes. Measurement, 18(1), 47–57. https://doi.org/10.1016/0263-2241(96)00044-9
Search in Google Scholar Back to article
Calypso Networks Association. (2016). Calypso Basics – Operating Instructions, version 2016.
Search in Google Scholar Back to article
Wikimedia Foundation. (2019). Gauge block. https://en.wikipedia.org/wiki/Gauge_block
Search in Google Scholar Back to article
Shakarji, C. M., Srinivasan, V. (2013). Theory and algorithms for weighted total least-squares fitting of lines, planes, and parallel planes to support tolerancing standards. Journal of Computing and Information Science in Engineering, 13(3), 031008. https://doi.org/10.1115/1.4024854
Search in Google Scholar Back to article
Eaton, J. W. (2020). GNU Octave. https://octave.org
Search in Google Scholar Back to article
The MathWorks, Inc. (2020). Matlab. https://ch.mathworks.com/products/matlab.html
Search in Google Scholar Back to article
Zaiontz, C. (2023). Real statistics using excel. https://real-statistics.com
Search in Google Scholar Back to article
International Organization for Standardization. (2009). Geometrical product specifications (GPS) – Acceptance and reverification tests for coordinate measuring machines (CMM). ISO 10360-2:2009. https://www.iso.org/standard/40954.html
Search in Google Scholar Back to article

Verification of Coordinate Measuring Machine Using a Gauge Block

Abstract

Paradigm

My account