References
- Adamczak, S. (2023). Metrologia geometryczna powierzchni technologicznych (1st ed.). Wydawnictwo Naukowe PWN, ISBN 978-83-01-23296-2.
- Johnson, R., Yang, Q., Butler, C. (1998). Dynamic error characteristics of touch trigger probes fitted to coordinate measuring machines. In IMTC/98 Conference Proceedings. IEEE Instrumentation and Measurement Technology Conference. Where Instrumentation is Going (Cat. No.98CH36222). IEEE, 2, 1104–1109. https://doi.org/10.1109/IMTC.1998.676895
- Edgeworth, R., Wilhelm, R. G. (2023). Uncertainty management for cmm probe sampling of complex surfaces. In ASME 2023 International Mechanical Engineering Congress and Exposition. ASME, 511–518. https://doi.org/10.1115/IMECE1996-0821
- Lee, M., Cho, N.-G. (2013). Probing-error compensation using 5 degree of freedom force/moment sensor for coordinate measuring machine. Measurement Science and Technology, 24(9), 095001. https://doi.org/10.1088/0957-0233/24/9/095001
- Han, Z. L., Yuan, M. X. (2013). Research on the vector measure method of coordinate measuring machine. In Key Engineering Materials, 561, 572–575. https://doi.org/10.4028/www.scientific.net/KEM.561.572
- Drbúl, M., Czán, A., Šajgalík, M., Piešová, M., Stępień, K. (2017). Influence of normal vectors on the accuracy of product’s geometrical specification. Procedia Engineering, 192, 119–123. https://doi.org/10.1016/j.proeng.2017.06.021
- Yang, Q., Butler, C., Baird, P. (1996). Error compensation of touch trigger probes. Measurement, 18(1), 47–57. https://doi.org/10.1016/0263-2241(96)00044-9
- Calypso Networks Association. (2016). Calypso Basics – Operating Instructions, version 2016.
- Wikimedia Foundation. (2019). Gauge block. https://en.wikipedia.org/wiki/Gauge_block
- Shakarji, C. M., Srinivasan, V. (2013). Theory and algorithms for weighted total least-squares fitting of lines, planes, and parallel planes to support tolerancing standards. Journal of Computing and Information Science in Engineering, 13(3), 031008. https://doi.org/10.1115/1.4024854
- Eaton, J. W. (2020). GNU Octave. https://octave.org
- The MathWorks, Inc. (2020). Matlab. https://ch.mathworks.com/products/matlab.html
- Zaiontz, C. (2023). Real statistics using excel. https://real-statistics.com
- International Organization for Standardization. (2009). Geometrical product specifications (GPS) – Acceptance and reverification tests for coordinate measuring machines (CMM). ISO 10360-2:2009. https://www.iso.org/standard/40954.html