High-Performance Electric Two-Wheeler Fast Charger Based on Intelligent Control Algorithm
References
- H. Tu et al., “Extreme Fast Charging of Electric Vehicles: A Technology Overview, ” IEEE Transactions on Transportation Electrification, vol. 5, no. 4, 2019, pp. 861–878; doi: 10.1109/TTE.2019.2958709.
- A. Ghosh, “Possibilities and Challenges for the inclusion of the Electric Vehicle (EV) to Reduce the Carbon Footprint in the Transport Sector: A Review, ” Energies (Basel), vol. 13, no. 10, 2020, pp. 1–2; doi: 10.3390/en13102602.
- M. Bharathidasan, V. Indragandhi, and B. Aljafari, “Hybrid Controlled Multi-Input DC/DC Converter for Electric Vehicle Application, ” International Transactions on Electrical Energy Systems, vol. 2023, pp. 1–16; doi: 10.1155/2023/8308418.
- D.N. Huu and VN. Ngoc, ‘A Three-Stage of Charging Power Allocation for Electric Two-Wheeler Charging Stations, ” IEEE Access, vol. 10, 2022, pp. 61080–61093; doi: 10.1109/ACCESS.2022.3181731.
- I. Veza et al., “Electric Vehicles in Malaysia and Indonesia: Opportunities and Challenges, ” Energies (Basel), vol. 15, no. 7, 2022, pp. 1–4; doi: 10.3390/en15072564.
- R. Swapnil and V.N. Kalkhambkar, “Optimal Operation Model of Vehicle to Vehicle Charging System, ” Journal of Electrical and Electronics Engineering, vol. 15, no. 1, 2022, pp. 52–58; https://www.proquest.com/openview/6abce8708f539109954a48200386c0ae/1?pq-origsite=gscholar–cbl=54417
- P. Sharma et al., “A Comprehensive Study on Electrical Vehicle in Charging Infrastructure, Challenges and Future Scope, ” Electric Vehicles, Green Energy and Technology, N. Patel et al., eds., Springer, 2021, pp. 1–285; doi: 10.1007/978-981-15-9251-5_16.
- P. Sharma, A. Kumar Sharma, and A.K. Vyas, “Comparative Study of DC-DC Converter With Different Control Techniques, ” Recent Advances in Renewable Energy Sources, P. Sharma, ed., RARES2021, 2021, pp. 1–6; doi: https://papers.ssrn.com/sol3/papers.cfm?abstract_id=3808564#
- F. Mumtaz et al., “Review on Non-isolated DCDC Converters and their Control Techniques for Renewable Energy Applications, ” Ain Shams University, 2021; doi: 10.1016/j.asej.2021.03.022.
- J. Anzola et al., “Review of Architectures Based on Partial Power Processing for DC-DC Applications, ” Institute of Electrical and Electronics Engineers Inc, 2020; doi: 10.1109/ACCESS.2020.2999062.
- H. Ye et al., “High Step-Up Interleaved dc/dc Converter with High Efficiency” Energy Sources, Part A: Recovery, Utilization and Environmental Effects, vol. 46, 2020, pp. 4886–4905; doi: 10.1080/15567036.2020.1716111.
- P. Sharma, D.K. Dhaked, and A.K. Sharma, “Mathematical Modeling and Simulation of DC-DC Converters Using State-Space Approach, ” Proceedings of Second International Conference, J.C. Bansal, K. Deep, and A.K. Nagar, eds., Springer, 2020, pp. 1–737; doi: 10.1007/978-981-156707-0.
- P. Sharma et al., “Coati Optimized FOPID Controller for Non-Isolated DC-DC Converters in EV Charging Application, ” IET Power Electronics, 2024, pp. 2771–2784; doi: 10.1049/pel2.12798.
- P. Sharma et al., “Novel Current-Fed Bidirectional DC-DC Converter for Battery Charging in Electric Vehicle Applications with Reduced Spikes, ” Electricity, vol. 5, no. 4, 2024, pp. 1022–1048; doi: 10.3390/electricity5040052.
- K. Shreya et al., “CUK Converter Fed Resonant LLC Converter Based Electric Bike Fast Charger for Efficient cc/cv Charging Colution, ” Journal of Applied Science and Engineering, vol. 24, no. 3, 2020, pp. 331–338; doi: 10.6180/jase.202106_24(3).0008.
- Y.-S. Cheng et al., “Design and Implementation of Li-ion Battery Charger Using State-of-Charge Estimation with Fuzzy Temperature Control, ” in 2015 IEEE ICIT, 2015, p. 799; doi: 10.1109/ICIT.2015.7125402.
- S.S. Hussein, A.J. Abid, and A.A. Obed, “ANFIS-Based New Approach for an Optimal Lithium-Ion Battery Charging Control, ” in 2023 IEEE 3rd International Conference in Power Engineering Applications: Shaping Sustainability Through Power Engineering Innovation, ICPEA 2023, 2023, pp. 248–251; doi: 10.1109/ICPEA56918.2023.10093226.
- G. Balen et al., “Modeling and Control of Interleaved Buck Converter for Electric Vehicle Fast Chargers, ” in 2017 COBEP, 2018, pp. 1–6; doi: 10.1109/COBEP.2017.8257412.
- L. Ntogramatzidis et al., “A Novel MIMO Control for Interleaved Buck Converters in EV DC Fast Charging Applications, ” IEEE Transactions on Control Systems Technology, vol. 31, no. 4, 2023, pp. 1892–1900; doi: 10.1109/TCST.2023.3237497.
- M. Carbajal-Retana et al., “Interleaved Buck Converter for Inductive Wireless Power Transfer in dc-dc Converters, ” Electronics (Switzerland), vol. 9, no. 6, pp. 1–15; doi: 10.3390/electronics9060949.
- S. Cuoghi et al., “Multileg Interleaved Buck Converter for EV Charging: Discrete-Time Model and Direct Control Design, ” Energies (Basel), vol. 13, no. 2, pp. 1–8; doi: 10.3390/en13020466.
- A. Garg and M. Das, “High Efficiency Three Phase Interleaved Buck Converter for Fast Charging of EV, ” in ICPEE 2021 - 2021 1st International Conference on Power Electronics and Energy, 2021, pp. 1–5; doi: 10.1109/ICPEE50452.2021.9358486.
- K. Drobnic et al., “An Output Ripple-Free Fast Charger for Electric Vehicles Based on Grid-Tied Modular Three-Phase Interleaved Converters, ” IEEE Trans Ind Appl, vol. 55, no. 6, 2019, pp. 6102–6114; doi: 10.1109/TIA.2019.2934082.
- Y.T. Yau, K.I. Hwu, and J.J. Shieh, “Minimization of Output Voltage Ripple of Two-Phase Interleaved Buck Converter with Active Clamp, ” Energies (Basel), vol. 14, no. 16, 2021, pp. 1–30; doi: 10.3390/en14165215.
- A.I. Pózna, K.M. Hangos, and A. Magyar, “Design of Experiments for Battery Aging Estimation, ” IFAC-PapersOnLine, 2018, pp. 386–391; doi: 10.1016/j.ifacol.2018.11.733.
- H. Li et al., “Cooperative CC-CV Charging of Supercapacitors Using Multicharger Systems, ” IEEE Transactions on Industrial Electronics, vol. 67, no. 12, 2020, pp. 10497–10508; doi: 10.1109/TIE.2019.2962485.
- L. Gan, U. Topcu, and S.H. Low, “Optimal Decentralized Protocol for Electric Vehicle Charging, ” IEEE Transactions on Power Systems, vol. 28, no. 2, 2012, pp. 940–951; doi: 10.1109/TPWRS.2012.2210288.
- M.C. Kisacikoglu, F. Erden, and N. Erdogan, “Distributed Control of PEV Charging Based on Energy Demand Forecast, ” IEEE Trans Industr Inform, vol. 14, no. 1, 2018, pp. 332–341; doi: 10.1109/TII.2017.2705075.
- S. Bhatnagar et al., “Charging System Analysis in Static and Dynamic Wireless Electric Vehicle, ” International Journal of Advanced Research in Engineering and Technology (IJARET), vol. 10, no. 1, 2019, pp. 104–120; doi: https://www.doi.org/10.34218/IJARET.10.1.2019.011
- G. Madhur et al., “Fast Charging Electric Vehicle using Fuzzy Logic Controller, ” International Journal of Engineering Research & Technology (IJERT), vol. 9, pp. 499–502; doi: 10.17577/IJERTV9IS050426.
- D.N. Huu and VN. Ngoc, ‘Analysis Study of Current Transportation Status in Vietnam’s Urban Traffic and the Transition to Electric Two-Wheelers Mobility, ” Sustainability (Switzerland), vol. 13, no. 10, 2021, pp. 1–27; doi: 10.3390/su13105577.
- T. Saravanakumar and R.S. Kumar, “Fuzzy Based Interleaved Step-up Converter for Electric Vehicle, ” Intelligent Automation and Soft Computing, vol. 35, no. 1, 2022, pp. 1103–1118; doi: 10.32604/iasc.2023.025511.
- D.V Pendam and T.M. Rofin, “Electric Vehicle and Charging Infrastructure Development: A Comprehensives Review Using Science Mapping and Thematic Analysis, ” 2023; doi: 10.1007/978-981-99-1019-9_26.
- V. N. Ngoc and D. N. Huu, “Optimal Valley-Filling Algorithm for Electric Two-wheeler Charging Stations, ” Engineering, Technology and Applied Science Research, vol. 14, no. 1, pp. 13072–13077, 2024; doi: 10.48084/etasr.6569.
- Z. Chen, Z. Zheng, X. Tang, and Y. Wu, “Model Predictive Controlled Dual Active Bridge Converter with Efficiency Optimization and Fast Dynamic Response, ” Journal of Electrical Engineering and Technology, vol. 19, no. 1, 2024; doi: 10.1007/s42835-023-01569-x.
Language: English
Page range: 175 - 184
Submitted on: Aug 26, 2024
Accepted on: Feb 17, 2025
Published on: Jun 25, 2026
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2026 Subiyanto, Rizky Ajie Aprilianto, Mario Norman Syah, Bagaskoro Saputro, Abdurrakhman Hamid Al-Azhari, Nektar Cahayasabda, Bayu Adi Pambudi, Faiq Mananul Faqih, Icha Arifah Annisa, Dwi Bagas Nugroho, Siva Khaaifina Rachmat, Dewi Anggriani, published by Łukasiewicz Research Network – Industrial Research Institute for Automation and Measurements PIAP
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.