References
- L.L. Howell, Compliant Mechanisms, Wiley, 2001.
- M. Ling et al., “Kinetostatic and Dynamic Modeling of Flexure‐Based Compliant Mechanisms: A Survey,” Appl. Mech. Rev., vol. 72, no. 3, 2020, 030802, doi: 10.1115/1.4045679.
- A.H.J. Slocum, “Rolling Contact Orthopaedic Joint Design,” PhD Thesis, Massachusetts Institute of Technology, 2013.
- C. Huxman and J. Butler, “A Systematic Review of Compliant Mechanisms as Orthopedic Implants,” J. Med. Device., vol. 15, no. 4, 2021, 040802, doi: 10.1115/1.4052011.
- “ISO 10328:2016. Prosthetics—Structural Testing of Lower‐Limb Prostheses—Requirements and Test Methods,” International Organization for Standardization, 2016.
- M. Qiu et al., “Designing Prosthetic Knee Joints with Bio‐Inspired Bearing Surfaces,” Tribol. Int., vol. 77, 2014, pp. 106–110, doi: 10.1016/j.triboi nt.2014.04.025.
- P. G. Kulkarni et al., “Overcoming Challenges and Innovations in Orthopedic Prosthesis Design: An Interdisciplinary Perspective,” Biomed. Mater. Devices, vol. 2, no. 1, 2024, pp. 58–69, doi: 10.100 7/s44174‐023‐00087‐8.
- A. Demofonti et al., “Design of a Modular and Compliant Wrist Module for Upper Limb Prosthetics,” Anat. Rec., vol. 306, no. 4, 2023, pp. 764– 776, doi: 10.1002/ar.24911.
- D. Stojiljković et al., “Simulation, Analysis, and Experimentation of the Compliant Finger as a Part of Hand‐Compliant Mechanism Development,” Appl. Sci., vol. 13, no. 4, 2023, p. 2490, doi: 10.3390/app13042490.
- M. Kowalik et al., “Canine Hindlimb Prosthetic Research and its Manufacturing with the Help of Additive Technology,” Materials Research Proceedings, 2023, pp. 91–99. doi: 10.21741/97816 44902578‐13.
- A.R. Gutierrez, “Exploring the Future of Prosthetics and Orthotics: Harnessing the Potential of 3D Printing,” Can. Prosthetics Orthot. J., vol. 6, no. 2, 2024, doi: 10.33137/cpoj.v6i2.42140.
- P. Falkowski, “Light Exoskeleton Design with Topology Optimisation and FEM Simulations for FFF Technology,” J. Autom. Mob. Robot. Intell. Syst., vol. 15, no. 2, 2022, pp. 14–19, doi: 10.143 13/JAMRIS/2‐2021/9.
- J. Żaba and S. Paszkiel, “Concept of Using the Brain‐Computer Interface to Control Hand Prosthesis,” J. Autom. Mob. Robot. Intell. Syst., vol. 16, no. 4, 2023, pp. 3–12, doi: 10.14313/JAMRIS/42022/27.
- J. Victor, “Kinematics of the Normal Native Knee,” Soft Tissue Balancing in Total Knee Arthroplasty, S. Matsuda, S. Lustig, and W. van der Merwe, eds., Springer Berlin Heidelberg, 2017, pp. 29–37, doi: 10.1007/978‐3‐662‐54082‐4_3.
- A. Ciszkiewicz and G. Milewski, “A Novel Kinematic Model for a Functional Spinal Unit and a Lumbar Spine,” Acta Bioeng. Biomech., vol. 18, no. 1, 2016, pp. 97–95. doi: 10.5277/ABB‐0032 4‐2015‐03.
- K. Carroll, J. Rheinstein, and E. Pollard, Orthotics and Prosthetics in Rehabilitation, Fourth Ed., Elsevier, 2020, pp. 566–576.
- O. Mohamed and H. Appling, “Clinical Assessment of Gait,” Orthotics and Prosthetics in Rehabilitation, Elsevier, 2020, pp. 102–143. doi: 10.1 016/B978‐0‐323‐60913‐5.00005‐2.
- S.A. Gard, “The Influence of Prosthetic Knee Joints on Gait,” Handbook of Human Motion, B. Müller and S.I. Wolf, eds., Springer International Publishing, 2018, pp. 1359–1382. doi: 10.1007/978‐3‐319‐14418‐4_75.
- T.G. Nelson et al., “Curved‐FoldingInspired Deployable Compliant RollingContact Element (D‐CORE),” Mech. Mach. Theory, vol. 96, 2016, pp. 225–238, doi: 10.1016/j.mechmachtheory.2015.05.017.
- P.A. Halverson, L.L. Howell, and S.P. Magleby, “Tension‐Based Multi‐Stable Compliant RollingContact Elements,” Mech. Mach. Theory, vol. 45, no. 2, pp. 147–156, 2010, doi: 10.1016/j.mech machtheory.2008.11.013.