Skip to main content
Have a personal or library account? Click to login
Application of Replica Technique and SEM in Accuracy Measurement of Ceramic Crowns Cover

Application of Replica Technique and SEM in Accuracy Measurement of Ceramic Crowns

Measurement Science Review
Volume 12 (2012): Issue 3 (June 2012)
By: ,  ,  ,  ,  ,   and    
Open Access
|May 2012
References

References

  1. Sapozhnikova, K., Taymanov, R. (2010). Improvement of traceability of widely-defined measurements in the field of humanities., 10 (3), 78-88.
    Open DOISearch in Google Scholar
  2. Laghrouche, M., Haddab, S., Lotmani, S. Mekdoud, K., Ameur, S. (2010). Low-cost embedded oximeter., 10 (5), 176-179.
    Open DOISearch in Google Scholar
  3. Hreha, P., Hloch, S., Magurova, D., Valicek, J., Kozak, D., Harnicarova, M., Rakin, M. (2010). Water jet technology used in medicine., 17 (2), 237-240.
    Search in Google Scholar
  4. Jevremovic, D., Puskar, T., Budak, I., Vukelic, D., Kojic, V., Egbeer, D., Williams, R. (2012). An RE/RM approach to the design and manufacture of removable partial dentures with a biocompatibility analysis of the F75 Co-Cr SLM alloy., 46 (2), 41-47.
    Search in Google Scholar
  5. Pilipovic, A., Raos, P., Sercer, M. (2011). Experimental testing of quality of polymer parts produced by Laminated Object Manufacturing - LOM., 18 (2), 253-260.
    Search in Google Scholar
  6. Todorovic, A., Radovic, K., Grbovic, A., Rudolf, R., Maksimovic, I., Stamenkovic, D. (2010). Stress analysis of a unilateral complex partial denture using the finite-element method., 44 (1), 41-47.
    Search in Google Scholar
  7. Levin, G.G., Vishnyakov, G.N., Loshchilov, K.E., Ibragimov, T.I., Lebedenko I.Y., Tsalikova, N.A. (2010). Modern dental CAD/CAM systems with intraoral 3D profilometers., 53 (3), 321-324.
    Open DOISearch in Google Scholar
  8. Witkowski, S., Komine, F., Gerds, T. (2006). Marginal accuracy of titanium copings fabricated by casting and CAD/CAM techniques., 96 (1), 47-52.
    Open DOISearch in Google Scholar
  9. Sorensen, J.A. (1990). A standardized method for determination of crown margin fidelity., 64 (1), 18-24.
    Open DOISearch in Google Scholar
  10. Holmes, J.R., Bayne, S.C., Holland, G.A., Sulik, W.D. (1989). Considerations in measurement of marginal fit., 62 (4), 405-408.
    Open DOISearch in Google Scholar
  11. Sulaiman, F., Chai, J., Jamelson, L., Wozniak, W. (1997). A comparison of the marginal fit of In-Ceram, IPS Empress, and Procera crowns., 10 (5), 478-484.
    Search in Google Scholar
  12. Quante, K., Ludwig, K., Kern, M. (2008). Marginal and internal fit of metal-ceramic crowns fabricated with a new laser melting technology., 24 (10), 1311-1315.
    Open DOISearch in Google Scholar
  13. Fonseca, J.C., Henriques, G.E., Sobrinho, L.C., de Goes, M.F. (2003). Stress-relieving and porcelain firing cycle influence on marginal fit of commercially pure titanium and titanium aluminum vanadium copings., 19 (7), 686-691.
    Open DOISearch in Google Scholar
  14. Bindl, A., Mormann, W.H. (2003). Clinical and SEM evaluation of all-ceramic chair-side CAD/CAM generated pertial crowns., 111 (2), 163-169.
    Open DOISearch in Google Scholar
  15. Jevremovic, D.P., Ajdukovic, Z.R., Stankovic, S.D., Radosavljevic, R.D. (2012). Profilometric and SEM analyses of composite surfaces after excess cement removal., 66 (1), 59-66.
    Open DOISearch in Google Scholar
  16. Reich, S., Wichmann, M., Nkenke, E., Proeschel P. (2005). Clinical fit of all - ceramic three - unit fixed partial dentures, generated with three different CAD/CAM systems., 113 (2), 174-179.
    Open DOISearch in Google Scholar
  17. Kokubo, Y., Nagayama, Y., Tsunita, M., Ohkubo, C., Fukushima, S., Steyren, P.V. (2005). Clinical marginal and internal gaps of In-Ceram crowns fabricated using the GN- I system., 32 (10), 753-758.
    Open DOISearch in Google Scholar
  18. Mitchell, C.A., Pintado, M.R., Douglas, W.H. (2001). Nondestructive in vitro quantification of crown margins., 85 (6), 575-584.
    Open DOISearch in Google Scholar
  19. Quintas, A.F., Oliveira, F., Bottino, M.A. (2004). Vertical marginal discrepancy of ceramic copings with different ceramic materials, finis lines, and luting agents: an in vitro evaluation., 92 (3), 250-257.
    Open DOISearch in Google Scholar
  20. Nakamura, T., Dei, N., Kojim, T., Wakabayashi, K. (2003). Marginal and internal fit of Cerec 3 CAD/CAM all-ceramic crown., 16 (3), 244-248.
    Search in Google Scholar
  21. Bindl, A., Mormann, W.H. (2005). Marginal and internal fit of all-ceramic CAD/CAM crown-copings on cheamfer preparations., 32 (6), 441-417.
    Open DOISearch in Google Scholar
  22. Nakamura, T., Nonaka, M., Maruyama, T. (2000). In vitro fitting accuracy of copy-milled alumina cores and all-ceramic crowns., 13 (3), 189-193.
    Search in Google Scholar
  23. Wolfart, S., Wegner, S.M., Al-Halabu, A., Kern, M. (2003). Clinical evaluation of marginal fit of a new experimental all-ceramic system before and after cementation., 16 (6), 587-592.
    Search in Google Scholar
  24. Ryge, G., Snyder, M. (1973). Evaluating the clinical quality of restorations., 87 (2), 369-377.
    Open DOISearch in Google Scholar
  25. Wettstein, F., Sailer, I., Roos, M., Hammerle, C.H.F. (2008). Clinical study of the internal gaps of zirconia and metal frameworks for fixed partial dentures., 116 (3), 272-279.
    Open DOISearch in Google Scholar
  26. Coli, P., Karlsson, S. (2004). Fit of a new pressure-sintered zirconium dioxide coping., 17 (1), 59-64.
    Search in Google Scholar
  27. Tinschert, J., Natt, G., Mautsch, W., Spiekermann, H., Anusavice, K.J. (2001). Marginal fit of alumina-and zirconia-based fixed partial dentures produced by a CAD/CAM system., 26 (4), 367-374.
    Search in Google Scholar
  28. Behr, M., Rosentritt, M., Latzel, D., Kreisler, T. (2001). Comparison of three types of fiber-reinforced composite molar crowns on their fracture resistance and marginal adaptation., 29 (3), 187-196.
    Open DOISearch in Google Scholar
  29. Laurent, M., Scheer, P., Dejou, J., Laborde, G. (2008). Clinical evaluation of the marginal fit of cast crowns - validation of the silicone replica method., 35 (2), 116-122.
    Open DOISearch in Google Scholar
  30. Rahme, H.Y., Tehini, G.E., Adib, S.M., Ardo, A.S., Rifai, K.T. (2008). In vitro evaluation of the "replica technique" in the measurement of the fit of Procera crowns., 9 (2), 25-32.
    Search in Google Scholar
  31. Groten, M., Girthofer, S., Probster, L. (1997). Marginal fit consistency of copy-milled all ceramic crowns during fabrication by light- and scanning-electron-microscopic analysis in vitro., 24 (12), 871-881.
    Open DOISearch in Google Scholar
  32. Todorovic, A., Trifkovic, B., Stamenkovic, D. (2010). Accuracy of ceramic crowns made by optical scanning methods of Cerec® 3D system., 26 (62), 977-986.
    Search in Google Scholar
  33. Pelekanos, S., Koumanou, M., Koutayas, S., Zinelis, S., Eliades, G. (2009). Micro-CT evaluation of the marginal fit of different In-Ceram aluminna copings., 4 (3), 278-292.
    Search in Google Scholar
DOI: https://doi.org/10.2478/v10048-012-0016-7 | Journal eISSN: 1335-8871
Journal RSS Feed
Language: English
Page range: 90 - 97
Published on: May 28, 2012
Published by: Slovak Academy of Sciences, Institute of Measurement Science
In partnership with: Paradigm Publishing Services
Publication frequency: Volume open
Keywords:
Accuracy,
CAD/CAM,
replica technique,
SEM,
ceramic crown
Related subjects:
Engineering,
Electrical engineering,
Control engineering, metrology and testing

© 2012 B. Trifkovic, I. Budak, A. Todorovic, J. Hodolic, T. Puskar, D. Jevremovic, D. Vukelic, published by Slovak Academy of Sciences, Institute of Measurement Science
This work is licensed under the Creative Commons License.

Volume 12 (2012): Issue 3 (June 2012)
Previous article
Next article