Skip to main content
Have a personal or library account? Click to login
Advanced Composite Vibration Damping Mount for Enhanced UAV Payload Stability: A Comprehensive Review Cover

Advanced Composite Vibration Damping Mount for Enhanced UAV Payload Stability: A Comprehensive Review

Open Access
|Sep 2026

References

  1. Austin R. Unmanned aircraft systems: UAVs design, development and deployment. Chichester, UK: John Wiley & Sons; 2010. https://doi.org/10.1002/9780470664797
  2. Fahlstrom PG, Gleason TJ., Sadraey MH. Introduction to UAV systems. 5th ed. Chichester, UK: John Wiley & Sons; 2012. ISBN: 978-1-119-80261-7
  3. Valavanis KP, Vachtsevanos GJ, editors. Handbook of unmanned aerial vehicles. Dordrecht: Springer; 2015. https://doi.org/10.1007/978-90-481-9707-1
  4. Sadraey MH. Unmanned aircraft design: a review of fundamentals. San Rafael, CA: Morgan & Claypool; 2017. https://doi.org/10.2200/S00789ED1V01Y201707MEC004
  5. Bouabdallah S, Noth A, Siegwart R. PID vs LQ control techniques applied to an indoor micro quadrotor. In: Proceedings of the 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS); 2004 Sep 28–Oct 2; Sendai, Japan. Piscataway, NJ: IEEE; 2004. Vol. 3, p. 2451–2456. https://doi.org/10.1109/IROS.2004.1389776
  6. Brust MR, Zink M, Santi P. On the importance of UAVs in smart cities. IEEE Communications Magazine. 2016;54(5):30–36. https://doi.org/10.1109/MCOM.2016.7470935
  7. Watts D, Ambrosia V, Hinkley E. Unmanned aircraft systems in remote sensing and scientific research. Remote Sensing. 2012;4(6):1671–1692. https://doi.org/10.3390/rs4061671
  8. Verma M, Lafarga V, Baron M, Collette C. Active stabilization of unmanned aerial vehicle imaging platform. Journal of Vibration and Control. 2020;26(19–20):1791–1803. https://doi.org/10.1177/1077546320905494
  9. Fu J, Liu G, Fan C, Liu Z, Luo H. Design and experimental study on vibration reduction of an UAV LiDAR using rubber material. Actuators. 2022;11(12):345. https://doi.org/10.3390/act11120345
  10. Kang CH, Park HS, Seo SW, Kwag DG. Design and experiment of a passive vibration isolator for small unmanned aerial vehicles. Applied Sciences. 2024;14(10):4113. https://doi.org/10.3390/app14104113
  11. Fereidooni A, Graham S, Chen E, Wickramasinghe V. Numerical and experimental investigation of a single-axis parallel active vibration mount for helicopter seats using vibration standards. Journal of Dynamic Systems, Measurement, and Control. 2020;142(7):071004. https://doi.org/10.1115/1.4046383
  12. Caratao Z, Gabel K, Arun A, Myers B. MicaSense aerial pointing and stabilization system: dampening in-flight vibrations for improved agricultural imaging. In: AIAA SciTech Forum; 2018 Jan 8–12; Kissimmee, FL. Reston, VA: American Institute of Aeronautics and Astronautics; 2018. https://doi.org/10.2514/6.2018-1239
  13. Wijaya YG, Pranoto FS, Ardian R, Abian N. A cost-effective solution for measuring vibration and impact on small twin engine electric fixed wing UAV. Evergreen. 2024;11(3):2367–2385. https://doi.org/10.5109/7236880
  14. Rivera J, Happawana G, Reilly P, Mizuno W. Three stage vibration isolation for unmanned aerial vehicle gimbal targeting system. In: American Society for Engineering Education Zone IV Conference; 2010; Reno, NV. 2010. https://doi.org/10.18260/1-2-1153-54362
  15. Waters TP, Sherman L, Moxey H, Yang J, Court B, Chan H, et al. Design, build and test of packaging for vibration control of medical goods delivered by drone. Journal of Physics: Conference Series. 2024;2647:172008. https://doi.org/10.1088/1742-6596/2647/17/172008
  16. Shajahan K, Sundar RSA, Kumar AVR, Reji J. Design and validation of a low frequency anti-vibration mount using NBR-carbon fiber composite. Advances in Military Technology. 2025;20(1):227–295. https://doi.org/10.3849/aimt.01967
  17. Callicoat J, Gaeta R, Jacob J. An experimental study of composite materials for the design of quiet UAVs. In: 21st AIAA/CEAS Aeroacoustics Conference, AIAA Aviation Forum; 2015 Jun 22–26; Dallas, TX. Reston, VA: American Institute of Aeronautics and Astronautics; 2015. https://doi.org/10.2514/6.2015-3145
  18. Titterton D, Weston J. Strapdown inertial navigation technology. 2nd ed. Stevenage, UK: Institution of Engineering and Technology; 2004. https://doi.org/10.1049/PBRA017E
  19. Rao SS. Mechanical vibrations. 6th ed. Hoboken, NJ: Pearson; 2017.
  20. Harris CM, Piersol AG. Harris' shock and vibration handbook. 6th ed. New York: McGraw-Hill; 2010.
  21. Nashif AD, Jones DIG, Henderson JP. Vibration damping. New York: Wiley; 1985.
  22. Cremer L, Heckl M, Petersson BAT. Structure-borne sound: structural vibrations and sound radiation at audio frequencies. Berlin: Springer; 2005.
  23. Den Hartog JP. Mechanical vibrations. New York: Dover Publications; 1985.
  24. Frahm H. Device for damping vibrations of bodies. United States patent US 989,958. 1911 Apr 18.
  25. Gok K, Karagoz G, Gok A. Vibration damper design and additive manufacturing for unmanned aerial vehicles. Journal of Mechanical Materials and Mechanics Research. 2023;6(2):23–30. https://doi.org/10.30564/jmmmr.v6i2.5711
  26. Ahmadian M. Active and passive vibration control. Shock and Vibration Digest. 1998;30(3):161–167.
  27. Lakes R. Viscoelastic materials. Cambridge: Cambridge University Press; 2009. https://doi.org/10.1017/CBO9780511626722
  28. Simsiriwong J. Structural testing of an ultralight UAV composite wing and fuselage [master’s thesis]. Mississippi State (MS): Mississippi State University; 2009.
  29. Rao JS, Gupta K. An introductory course on theory and practice of mechanical vibrations. New Delhi: New Age International; 1999.
  30. Schwartz MM. Composite materials handbook. New York: McGraw-Hill; 1992.
  31. Gibson RF. Principles of composite material mechanics. Boca Raton, FL: CRC Press; 2016.
  32. Fuller CR, Elliott SJ, Nelson PA. Active control of vibration. San Diego, CA: Academic Press; 1996. https://doi.org/10.1016/B978-0-12-269440-0.X5000-6
  33. Duffy KP, Lerch BA, Wilmoth NG, Kray N, Gemeinhardt G. Mechanical and vibration testing of carbon fiber composite material with embedded piezoelectric sensors. Proceedings of SPIE. 2012;8341:834116. https://doi.org/10.1117/12.916769
  34. Kaw AK. Mechanics of composite materials. Boca Raton, FL: CRC Press; 2005.
  35. Hull D, Clyne TW. An introduction to composite materials. 2nd ed. Cambridge: Cambridge University Press; 1996.
  36. Amabili M. Nonlinear vibrations and stability of shells and plates. Cambridge: Cambridge University Press; 2008. https://doi.org/10.1017/CBO9780511619694
  37. Hamzi NM, Rasani MR, Tahir MFM, Sanusi MH. Vibration characteristics of carbon fiber reinforced polymer composites under varying fiber orientation composition. International Journal of Engineering and Advanced Technology. 2019;9(2):2905–2918. https://doi.org/10.35940/ijeat.B2306.129219
  38. Jones RM. Mechanics of composite materials. 2nd ed. Philadelphia, PA: Taylor & Francis; 1999. https://doi.org/10.1201/9781498711067
  39. John LK, Murugan R, Singamneni S. Impact of quasi-isotropic raster layup on the mechanical behaviour of fused filament fabrication parts. High Performance Polymers. 2022;0(0):1–10. https://doi.org/10.1177/09540083211041954
  40. Acharya P, Pai D, Kini MV, Hegde S, Hosagade PN. Influence of seawater absorption on vibrational and tensile characteristics of quasi-isotropic glass/epoxy composites. Journal of Materials Research and Technology. 2019;8(1):1427–1433. https://doi.org/10.1016/j.jmrt.2018.10.008
  41. Lin J, Li W, Chen H, Zhang H, Zhao Y, Ma H, et al. Study on vibration damping characteristics of mounting structure based on the high damping alloy material. Applied Sciences. 2024;14(23):11056. https://doi.org/10.3390/app142311056
  42. Bhudolia SK, Perrotey P, Joshi SC. Enhanced vibration damping and dynamic mechanical characteristics of composites with novel pseudo-thermoset matrix system. Composite Structures. 2017;179:502–513. https://doi.org/10.1016/j.compstruct.2017.07.093
  43. Sarlin E, Liu Y, Vippola M, Zogg M, Ermanni P, Vuorinen J, et al. Vibration damping properties of steel/rubber/composite hybrid structures. Composite Structures. 2012;94(11):3327–3335. https://doi.org/10.1016/j.compstruct.2012.04.035
  44. Jalili N. A comparative study and analysis of semi-active vibration control. Journal of Vibration and Acoustics. 2002;124(4):593–605. https://doi.org/10.1115/1.1500336
  45. Huang Z, Peng H, Wang X, Chu F. Modeling and vibration control of sandwich composite plates. Materials. 2023;16(3):896. https://doi.org/10.3390/ma16030896
  46. Li Z, Crocker MJ. A review on vibration damping in sandwich composite structures. International Journal of Acoustics and Vibration. 2005;10(4):159–169.
  47. Liu Q, Li X, Zhang X, Zhou Y, Chen YF. Applying constrained layer damping to reduce vibration and noise from a steel–concrete composite bridge: an experimental and numerical investigation. Journal of Sandwich Structures & Materials. 2020;22(6):1903–25. https://doi.org/10.1177/1099636218789606
  48. Tang A, Yan X. A review on the damping properties of fiber reinforced polymer composites. Journal of Reinforced Plastics and Composites. 2020;39(15–16):549–566. https://doi.org/10.1177/0731684419879591
  49. Strong AB. Fundamentals of composites manufacturing: materials, methods and applications. Dearborn, MI: Society of Manufacturing Engineers; 2008.
  50. Whitney JM. Structural analysis of laminated anisotropic plates. Lancaster, PA: Technomic Publishing; 1987. https://doi.org/10.1201/9780203738122
  51. Hashin Z. Failure criteria for unidirectional fiber composites. Journal of Applied Mechanics. 1980;47(2):329–334. https://doi.org/10.1115/1.3153664
  52. Jaiswal P, Barve S. Utilization of composite materials for engine mounts and different vehicle structures: a review. AIP Conference Proceedings. 2022;2421:040007. https://doi.org/10.1063/5.0078199
  53. Reddy JN. Mechanics of laminated composite plates and shells: theory and analysis. 2nd ed. Boca Raton, FL: CRC Press; 2004.
  54. Hollaway LC. Advanced polymer composites and polymers in civil infrastructure. Oxford: Elsevier Science; 2001. https://doi.org/10.1016/B978-0-08-043661-6.X5000-1
  55. Gur Y, Wagner D. Damping properties and NVH modal analysis results of carbon fiber composite vehicle components. SAE International Journal of Materials and Manufacturing. 2017;10(2):198–205. https://doi.org/10.4271/2017-01-0500
  56. Alam N, Asnani NT. Vibration and damping analysis of fibre reinforced composite material plates. Journal of Composite Materials. 1986;20(1):2–18. https://doi.org/10.1177/002199838602000101
  57. Rao SS. Advanced theory of vibration. New York: Wiley; 1997.
  58. Prabhakaran S, Krishnaraj V, Senthilkumar M, Zitoune R. Sound and vibration damping properties of flax fiber reinforced composites. Procedia Engineering. 2014;97:573–581. https://doi.org/10.1016/j.proeng.2014.12.285
Language: English
Page range: 106 - 124
Submitted on: Jun 19, 2026
Accepted on: Aug 31, 2026
Published on: Sep 28, 2026
Published by: ŁUKASIEWICZ RESEARCH NETWORK – INSTITUTE OF AVIATION
In partnership with: Paradigm Publishing Services

© 2026 Kalpit P. Kaurase, Rajat Thakur, published by ŁUKASIEWICZ RESEARCH NETWORK – INSTITUTE OF AVIATION
This work is licensed under the Creative Commons Attribution 4.0 License.