References
- [1] Atarer, F., Korkmaz, K., Kiper, G. “Design alternatives of network of Altmann linkages”, International Journal of Computational Methods and Experimental Measurements 5 (4), pp. 495 – 503, 2017. DOI: 10.2495/CMEM-V5-N4-495-503
- [2] Bulgakov, V. M., Yaremenko, V. V., Chernysh, O. M. “Applied mechanics”, Kyiv: CNL. 2020.
- [3] Gudimova, L.N. “Improvement of construction of a press actuator”, Chernye Metally. 6, pp. 39 – 44, 2019.
- [4] Gulida, E. M., Dzyba, L. F., Olkhoviy, I. M. “Applied mechanics”, Lviv: Svit, 2007.
- [5] Kolovsky, M. Z., Evgrafov, A. N., Semenov, Yu. A. et al. 2000. Advanced theory of mechanisms and machines. Berlin: Springer.
- [6] Mata, S. A., Torras, A. B., Cabrera, J. A. et al. “Fundamentals of Machine Theory and Mechanisms”, Cham: Springer, 2016.
- [7] Ozols, O. G. “Theory of Mechanisms and Machines”, Moscow: Nauka, 1984.
- [8] Pavlishche, V. T., Kharchenko, Y. V., Barvinsky, A. F. et al. “Applied mechanics”, Lviv: Intelect-Zakhid, 2004.
- [9] Pogrebnyak, R. P. “Structural analysis and rational design parallelogram arm gripping”, Metallurgy theory and practice 1-2, pp. 123 – 125, 2015. DOI: 10.15802/stp2018/140547
- [10] Reshetov, L. “Self-Aligning Mechanisms”, Moscow: Mir Publishers, 1986.
- [11] Segla, S. “Static balancing of robot mechanisms and manipulation devices”, Strojnícky časopis – Journal of Mechanical Engineering 68 (2), pp. 77 – 90. 2018. DOI: 10.2478/scjme-2018-0019
- [12] Shala A., Bruci. M. “Proposed robot scheme with 5 DOF and dynamic modelling using MAPLE software“, Strojnícky časopis – Journal of Mechanical Engineering 67 (2), pp. 101 – 108, 2017. DOI: 10.1515/scjme-2017-0023
- [13] Sydorenko, I., Kravtsov, E., Prokopovych, I. “Reducing the reliability of equipment as a result of the reduction of the culture of production”, Proceedings of Odessa Polytechnic University 3 (59), pp. 5 – 13, 2019.
- [14] Stepin, P. “Strength of Materials”, New York: Gordon and Breach, 1963.
- [15] Voinea, R., Atanasiu, M. “Contributions a la Teorie geometrique des Vis.”, Buletinul Institutului Politichnic Bucuresti 21 (3), pp. 69 – 90, 1959.
- [16] Zalyubovskii, M. G., Panasyuk, I. V. “On the Study of the Basic Design Parameters of a Seven-Link Spatial Mechanism of a Part Processing Machine”, Int. Appl. Mech. 56, pp. 54 – 64, 2020. DOI: 10.1007/s10778-020-00996-x
- [17] Zdanevich, S. S., Pogrebnyak, R. P., Zdanevich, S. V. “Structural analysis and rational design of mechanisms of cross-roll tube straightening machines”, Science and Transport Progress. Bulletin of Dnipropetrovs’k National University of Railway Transport. 5 (77), pp. 65 – 73, 2018. DOI: 10.15802/stp2018/147630