Optimization of Drilling Parameters During Machining of Al-Mg-Si Alloys By Taguchi Method Coupled with Grey Relational Analysis and Validated By Fea Based Deform - 3D

Sreenivasulu, Reddy; Srinivasarao, Chalamalasetti

doi:10.2478/scjme-2021-0032

Abstract

In the present work to validate the experimental results as per Taguchi based grey relational analysis by considering L₂₇ orthogonal array corresponding to five factors with three levels and obtained optimal combination of input parameters to minimize the output responses during drilling process which is most important finishing operation required in the structural assembly works where we found application of Al-Mg-Si alloys, Deform-3D software is implemented and found good feasibility with that of experimental results.

References

[1] Burrs, J. C. A. “Analysis, control and removal CIRP Annals”, Manufacturing Technology 58, pp. 519 – 542, 2009.
Search in Google Scholar Back to article
[2] Gillespie, L. K., Blotter, P. T. “The Formation and Properties of Machining Burrs”, Transactions of ASME Journal of Engineers for Industry 98, pp. 66 – 74, 1976.
Search in Google Scholar Back to article
[3] Wang, G. C., Zhang, C. Y. “Study on the Forming Mechanism of the Cutting- Direction Burr in Metal Cutting”, Key Engineering Materials 259–260, pp. 868 – 871, 2004.
Search in Google Scholar Back to article
[4] Lauderbaugh L. K. “Analysis of the effects of process parameters on exit burrs in drilling using a combined simulation and experimental approach”, Journal of Material Processing Technology 209, pp. 1909 – 1919, 2009.
Search in Google Scholar Back to article
[5] Davim, J. P.; Reis, P. “Drilling carbon fiber reinforced plastic manufactured by auto clave experimental and statistical study”, Materials and Design 24 (5), pp. 315 – 324. 2003.
Search in Google Scholar Back to article
[6] Kilickap, E. “Modeling and optimization of burr height in drilling of A1-7075 using Taguchi method and response surface methodology”, International Journal of Advanced Manufacturing Technology 49, pp. 911 – 923, 2010.
Search in Google Scholar Back to article
[7] Park, I. W., Dornfeld, D. A. “A Study on Burr Formation Processes Using the Finite Element Method - Part I“, Transactions of ASME, Journal of Engineering Materials and Technology 122, pp. 221 – 228, 2000.
Search in Google Scholar Back to article
[8] Park, I. W., Dornfeld, D. A. “A Study on Burr Formation Processes Using the Finite Element Method - Part II, The influences of Exit angle. Rake Angle and Backup Material on Burr Formation Processes“, Transactions of ASME, Journal of Engineering Materials and Technology 122, pp. 229 – 237, 2000.
Search in Google Scholar Back to article
[9] Phadke, M. S. “Quality Engineering Using Robust Design”, Prentice Hall, Englewood Cliffs, New Jersey, 1989.
Search in Google Scholar Back to article
[10] Tsao, C. C., Hocheng, H. “Evaluation of thrust force and surface roughness in drilling composite material using Taguchi analysis and neural network”, Journal of Materials Processing Technology 203 (1 – 3), pp. 342 – 348, 2008.
Search in Google Scholar Back to article
[11] Douglas C. Montgomery, “Design and Analysis of Experiments”, 5th Edition, John Wiley, 2007.
Search in Google Scholar Back to article
[12] Ross, P. J. “Taguchi techniques for quality engineering”, McGraw-Hill Book Company, Singapore, 1996.
Search in Google Scholar Back to article
[13] Taguchi, G. “Introduction to Quality Engineering”, Asian Productivity Organization, Tokyo, 1990.
Search in Google Scholar Back to article
[14] Bagchi, T. P. “Taguchi Methods Explained - Practical Steps to Robust Design”, Prentice-Hall of India, New Delhi, 1993.
Search in Google Scholar Back to article
[15] Deng, J. L. “Introduction to grey system theory”, Grey Syst. 1, pp. 1 – 24, 1989.
Search in Google Scholar Back to article
[16] Johnson GR and Cook WH. In: Proceedings of seventh international symposium on ballistics, pp. 541 – 547, Netherlands, The Hague, 1983.
Search in Google Scholar Back to article
[17] Uma Maheshwera Reddy Paturi and Suresh Kumar Reddy Narala, “Constitutive flow stress formulation for aeronautic aluminum alloy AA7075-T6 at elevated temperature and model validation using finite element simulation”, Proc IMechE Part L: J Materials: Design and Applications 0(0) 1–11IMechE 2015. DOI: 10.1177/1464420715591860
Search in Google Scholar Back to article
[18] Reddy, S., Srinivasa Rao, Ch. “Modelling, Simulation and Experimental validation of Burr size in Drilling of Aluminium 6061 alloy”, Procedia Manufacturing 20, pp. 458 – 463, 2018.
Search in Google Scholar Back to article
[19] Reddy, S. Srinivasa Rao, Ch. “Some investigations on drilling of Aluminium alloys from FEA based simulation using Deform-3D”, at 7^th international &28^th All India Manufacturing Technology, Design and Research (AIMTDR-2018) conference 2018 during 13^th-15^th December 2018 organized by College of Engineering Guindy, Anna University, Chennai, 2018.
Search in Google Scholar Back to article
[20] Reddy, S., Srinivasa Rao, Ch. “Optimization of Machining Parameters during Drilling of Aluminium 2014 Alloy using CATIAV5R19 and DEFORM-3D” Numerical Simulation and Experimental Validation in the proceedings of COPEN 10, 2017 (Paper ID:352) organized by IIT Madras on 07-09 December 2017, pp. 833 – 836, 2017. ISBN: 978-93-80689-28-9.
Search in Google Scholar Back to article
[21] Tiago Emanuel Fraga da Silva “Numerical Simulation of Metal Cutting Processes on DEFORM-3D software”, M.S. dissertation, Faculty of Engineering of the University of Porto, July 2016.
Search in Google Scholar Back to article
[22] Pawar, P., Ballav, R., Kumar, A. “Modeling and Simulation of Drilling Process in Ti-6Al-4V, Al6061 Using Deform-3D Software”, International Journal of ChemTech Research 10 (3), pp. 137 – 142, 2017.
Search in Google Scholar Back to article
[23] Khadar, B. S., Jagannadha, R. M. V., Kolli, M. “Multi-Objective Optimization of Process Parameters for Powder Mixed Electrical Discharge Machining of Inconel X-750 Alloy Using Taguchi-Topsis Approach”, Strojnícky časopis – Journal of Mechanical Engineering 71(1), pp.1 - 18, 2021. DOI: 10.2478/scjme-2021-0001
Search in Google Scholar Back to article
[24] Sejč, P., Bučány, M., Zifčák, P. “Properties of FSW and MIG Welded Joints of AlSiMg Aluminium Alloy”, Strojnícky časopis – Journal of Mechanical Engineering 70 (2), pp. 141 – 152, 2020. DOI: 10.2478/scjme-2020-0027
Search in Google Scholar Back to article
[25] Pawar, P., Kumar, A., Ballav, R, “Parametric Analysis of Electrochemical Discharge Drilling on Soda-Lime Glass Material Using Taguchi L27 Orthogonal Array Method”, Strojnícky časopis – Journal of Mechanical Engineering 69 (4), pp. 115 – 132, 2019. DOI: 10.2478/scjme-2019-0047
Search in Google Scholar Back to article
[26] Ramanaiah, N. “Optimization of Process Parameters for FSW of Al-Mg-Mn-Sc-Zr Alloy Using CCD And RSM”, Strojnícky časopis – Journal of Mechanical Engineering 68 (3), pp. 195 – 224, 2018. DOI: 10.2478/scjme-2018-0035
Search in Google Scholar Back to article
[27] Himanshu, P., Lalta, P., Mayank, P., Vineet, T. “An Estimating the Effect of Process Parameters on Metal Removal Rate and Surface Roughness in WEDM of Composite Al6063/SiC/Al₂O₃ by Taguchi Method”, Strojnícky časopis – Journal of Mechanical Engineering 67 (2), pp. 25 – 36, 2017. DOI: 10.1515/scjme-2017-0015
Search in Google Scholar Back to article

Optimization of Drilling Parameters During Machining of Al-Mg-Si Alloys By Taguchi Method Coupled with Grey Relational Analysis and Validated By Fea Based Deform - 3D

Abstract

Paradigm

My account