References
- Ivan, J., Šustr, M., Sládek, D., Varecha, J., Gregor, J. (2023). Emergency meteorological data preparation for artillery operations. In Proceedings of the 20th International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO. SciTePress, 250–257. ISBN 978-989-758-670-5.
https://doi.org/10.5220/0012205500003543 - Drábek, J., Šustr, M., Potužák, L., Ivan, J., Liška, R. (2025). Contingency and emergency manual procedures for calculation firing data using direction and distance coefficients. Engineering Reports, 7 (6), e70252.
https://doi.org/10.1002/eng2.70252 - Šlouf, V., Blaha, M., Pekař, O., Brizgalová, L., Müllner, V. (2023). An alternative model for determining the rational amount of funds allocated to defence of the Czech Republic in conditions of expected risk. Obrana a strategie, 23 (1), 149–172.
https://doi.org/10.3849/1802-7199.23.2023.01.149-172 - Ivan, J., Šustr, M., Blaha, M., Havlík, T. (2021). Evaluation of possible approaches to meteorological techniques of artillery manual gunnery after the adoption of automated fire control system. Vojenské rozhledy: Czech Military Review, 30 (3), 75–92.
- Sládek, D., Šustr, M., Ivan, J., Hudec, F. (2025). Building meteorological backup artillery products: Leveraging upper air data. Vojenské rozhledy: Czech Military Review, 34 (1), 136–158.
https://doi.org/10.3849/2336-2995.34.2025.01.136-158 - Krátký, M., Minařík, V., Šustr, M., Ivan, J. (2020). Electronic warfare methods combatting UAVs. Advances in Science, Technology and Engineering Systems Journal, 5 (6), 447–454.
https://doi.org/10.25046/aj050653 - Blaha, M., Potužák, L., Šustr, M., Ivan, J., Havlík, T. (2021). Simplification options for more efficient using of angular and linear measuring rules for fire control. International Journal of Education and Information Technologies, 15 (15), 28–34.
https://doi.org/10.46300/9109.2021.15.4 - Harris, P. The history of shotgun chokes.
https://www.boxallandedmiston.co.uk/shotgun-anatomy/shotgun-chokes-explained/ - Bev Fitchett's Guns. Shotgun ammunition.
- Pemčák, I., Skala, J., Bača, J. (2022). Suitability of using different types of shotgun shells in defence against low-slow-small UAV. Science & Military, 2, 5–10.
https://doi.org/10.52651/sam.a.2022.2.5-10 - Corriveau, D., Rabbath, C. A., Goudreau, A. (2019). Effect of the firing position on aiming error and probability of hit. Defence Technology, 15 (5), 713–720.
https://doi.org/10.1016/j.dt.2019.08.008 - Šustr, M., Ivan, J., Blaha, M., Potužák, L. (2022). A manual method of artillery fires correction calculation. Military Operations Research, 27 (3), 77–94.
https://www.jstor.org/stable/27166357 - Marek, J., Pidanič, J., Juryca, K. (2018). The estimation of the transmitter's coordinates and its uncertainty. In 2018 International Symposium ELMAR. IEEE, 129–133.
https://doi.org/10.23919/ELMAR.2018.8534659 - Tang, B., Yang, J., Chen, W., Ming, X. (2024). Analysis of coupled vibration characteristics of linear-angular and parameter identification. Measurement Science Review, 24 (1), 17–26.
https://doi.org/10.2478/msr-2024-0003 - Utomo, B., Kusnandar, N., Firdaus, H., Paramudita, I., Kasiyanto, I., Lailiyah, Q., Syam, W. P. (2022). Comparison of GUM and Monte Carlo methods for measurement uncertainty estimation of the energy performance measurements of gas stoves. Measurement Science Review, 22 (4), 160–169.
https://doi.org/10.2478/msr-2022-0020 - Kučera, Ľ., Gajdošík, T., Gajdáč, I., Pompáš, L., Smetanka, L., Witkovský, V., Wimmer, G. (2023). Design and construction of metrological equipment for torque sensors with a carbon-based measuring arm. Measurement Science Review, 23 (4), 163–167.
https://doi.org/10.2478/msr-2023-0021 - Cimr, D., Tomaskova, H., Cimler, R., Kuhnova, J., Šlouf, V. (2018). A system to evaluate an air-strike threat level using fuzzy methods. In Computational Collective Intelligence. Springer, LNAI 11056, 322–331.
https://doi.org/10.1007/978-3-319-98446-9_30 - Pemčak, I., Nováčková, K., Krejči, J., Skala, J. (2023). Probability of hitting the drone propeller by projectile. In 2023 International Conference on Military Technologies (ICMT). IEEE.
https://doi.org/10.1109/ICMT58149.2023.10171307 - Palasiewicz, T., Rolenec, O., Kroupa, L., Maňas, P., Coufal, D. (2023). Blast-induced deformations of the building entrance part caused by improvised shaped charges. In Modelling and Simulation for Autonomous Systems. Springer, LNCS 13866, 109–130.
https://doi.org/10.1007/978-3-031-31268-7_7 - Májek, V., Šlouf, V. (2015). Operations with fuzzy numbers in the task divided targets. In International Conference on Military Technologies 2015 (ICMT 2015). IEEE, 641–645.
https://doi.org/10.1109/MILTECHS.2015.7153670 - Racek, F., Baláž, T., Krejčí, J., Procházka, S., Macko, M. (2017). Tracking, aiming and hitting the UAV with ordinary assault rifle. In Counterterrorism, Crime Fighting, Forensics, and Surveillance Technologies. SPIE, vol. 10441.
https://doi.org/10.1117/12.2276310 - Krejčí, J., Baláž, T., Švec, M. (2021). Methods for determining of UAS hit probability. In 2021 International Conference on Military Technologies (ICMT). IEEE.
https://doi.org/10.1109/ICMT52455.2021.9502765 - Korec, D., Blaha, M., Barta, J., Varecha, J. (2025). Innovative approaches to the use of artillery in wildfire suppression. Fire, 8 (6), 232.
https://doi.org/10.3390/fire8060232 - Ivan, J., Šustr, M., Gregor, J., Potužák, L., Varecha, J. (2025). Advancing soil sampling techniques for environmental assessment of artillery impact zones. Journal of Ecological Engineering, 26 (5), 1–14.
https://doi.org/10.12911/22998993/196688 - Šustr, M., Vajda, M., Blaha, M., Ivan, J., Korec, D. (2025). Artillery officer education and the interoperability challenge in Joint fires: A Czech-Slovak comparison. Cogent Education, 12 (1).
https://doi.org/10.1080/2331186X.2025.2533308 - Havlík, T., Šustr, M., Ivan, J., Pekař, O., Mušinka, M. (2024). Evaluation of the effectiveness of a firing battery in self-defense and protection in the area of firing positions using constructive simulation. The Journal of Defense Modeling and Simulation: Applications, Methodology, Technology.
https://doi.org/10.1177/15485129241291579