References
- Jadayel, M., Khameneifar, F. (2020). Improving geometric accuracy of 3D printed parts using 3D metrology feedback and mesh morphing. Journal of Manufacturing and Materials Processing, 4 (4), 112.
https://doi.org/10.3390/jmmp4040112 - Joch, R., Šajgalík, M., Drbúl, M., Holubják, J., Czán, A., Bechný, V., Matúš, M. (2023). The application of additive composites technologies for clamping and manipulation devices in the production process. Materials, 16 (10), 3624.
https://doi.org/10.3390/ma16103624 - Mohamed, O. A., Masood, S. H., Bhowmik, J. L. (2021). Modeling, analysis, and optimization of dimensional accuracy of FDM-fabricated parts using definitive screening design and deep learning feedforward artificial neural network. Advances in Manufacturing, 9, 115–129.
https://doi.org/10.1007/s40436-020-00336-9 - Grgić, I., Karakašić, M., Glavaš, H., Konjatić, P. (2023). Accuracy of FDM PLA polymer 3D printing technology based on tolerance fields. Processes, 11 (10), 2810.
https://doi.org/10.3390/pr11102810 - Beniak, J., Križan, P., Matúš, M., (2014). Accuracy of Rapid Prototyped models with using of FDM technology. Applied Mechanics and Materials, 613, 390–395.
https://doi.org/10.4028/www.scientific.net/AMM.613.390 - Scipioni, S. I., Lambiase, F. (2023). Error introduced by direct 3D printing of compression samples of PLA made by FDM process. The International Journal of Advanced Manufacturing Technology, 129, 4355–4368.
https://doi.org/10.1007/s00170-023-12625-1 - Beniak, J., Križan, P., Matus, M., Svatek, M. (2015). Ecological PLA plastic used for FDM rapid prototyping technology. In 15th International Multidisciplinary Scientific GeoConference (SGEM 2015). SGEM, 117–123. ISBN 978-1-5108-1002-0.
- Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., Hui, D. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering, 143, 172–196.
https://doi.org/10.1016/j.compositesb.2018.02.012 - Wong, K. V., Hernandez, A. (2012). A review of additive manufacturing. International Scholarly Research Notices.
https://doi.org/10.5402/2012/208760 - Kaliamoorthy, P. S., Subbiah, R., Bensingh, J., Kader, A., Nayak, S. (2019). Benchmarking the complex geometric profiles, dimensional accuracy and surface analysis of printed parts. Rapid Prototyping Journal, 26 (2), 319–329.
https://doi.org/10.1108/rpj-01-2019-0024 - De Pastre, M.-A., Tagne, S.-C. T., Anwer, N. (2020). Test artefacts for additive manufacturing: A design methodology review. CIRP Journal of Manufacturing Science and Technology, 31, 14–24.
https://doi.org/10.1016/j.cirpj.2020.09.008 - Rebaioli, L., Fassi, I. (2017). A review on benchmark artifacts for evaluating the geometrical performance of additive manufacturing processes. The International Journal of Advanced Manufacturing Technology, 93, 2571–2598.
https://doi.org/10.1007/s00170-017-0570-0 - Moylan, S., Slotwinski, J., Cooke, A., Jurrens, K., Donmez, M. A. (2014). An additive manufacturing test artifact. Journal of Research of the National Institute of Standards and Technology, 119, 429–459.
https://doi.org/10.6028/jres.119.017 - Minetola, P., Iuliano, L., Marchiandi, G. (2016). Benchmarking of FDM machines through part quality using IT grades. Procedia CIRP, 41, 1027–1032.
https://doi.org/10.1016/j.procir.2015.12.075 - Vorkapić, N., Pjević, M., Popović, M., Slavković, N., Živanović, S. (2020). An additive manufacturing benchmark artifact and deviation measurement method. Journal of Mechanical Science and Technology, 34, 3015–3026.
https://doi.org/10.1007/s12206-020-0633-2 - Beniak, J., Holdy, M., Križan, P., Matúš, M. (2019). Research on parameters optimization for the Additive Manufacturing process. Transportation Research Procedia, 40, 144–149.
https://doi.org/10.1016/j.trpro.2019.07.024 - Joch, R., Šajgalík, M., Drbúl, M., Měřínská, D., Markovič, J., Czán, A. (2025). Impact of powder bed fusion printing process parameters on the achieved quality of PA12 manufactured parts. Progress in Additive Manufacturing, 10, 4123–4141.
https://doi.org/10.1007/s40964-025-01053-0 - Son, J., Choi, S. (2015). Orientation selection for printing 3D models. In 2015 International Conference on 3D Imaging (IC3D). IEEE.
https://doi.org/10.1109/ic3d.2015.7391823 - Adach, M., Sokołowski, P., Piwowarczyk, T., Nowak, K. (2021). Study on geometry, dimensional accuracy and structure of parts produced by multi jet fusion. Materials, 14 (16), 4510.
https://doi.org/10.3390/ma14164510 - Rivas Santos, V. M., Thompson, A., Sims-Waterhouse, D., Maskery, I., Woolliams, P., Leach, R. (2020). Design and characterisation of an additive manufacturing benchmarking artefact following a design-for-metrology approach. Additive Manufacturing, 32, 100964.
https://doi.org/10.1016/j.addma.2019.100964 - Stojkić, Ž., Culjak, E., Šaravanja, L. (2020). 3D measurement - comparison of CMM and 3D scanner. In 31st DAAAM International Symposium on Intelligent Manufacturing and Automation. DAAAM, 780–787.
https://doi.org/10.2507/31st.daaam.proceedings.108 - Cuesta, E., Meana, V., Álvarez, B. J., Giganto, S., Martínez-Pellitero, S. (2022). Metrology benchmarking of 3D scanning sensors using a ceramic GD&T-based artefact. Sensors, 22 (22), 8596.
https://doi.org/10.3390/s22228596 - Gapiński, B., Wieczorowski, M., Marciniak-Podsadna, L., Dybała, B., Ziółkowski, G. (2014). Comparison of different methods of measurement geometry using CMM, optical scanner and computed tomography 3D. Procedia Engineering, 69, 255–262.
https://doi.org/10.1016/j.proeng.2014.02.230 - Mendricky, R., Sobotka, J. (2020). Accuracy comparison of the optical 3D scanner and CT scanner. Manufacturing Technology, 20 (6), 791–801.
https://doi.org/10.21062/mft.2020.120 - Mohanavel, V., Kannan, S., Raman, M., Kulandaivel, A., Seikh, A. H., Iqbal, A. (2023). Impact of CNT addition on surface roughness and dimensional characteristics of polymer nano-composite fabricated by FDM method. The International Journal of Advanced Manufacturing Technology.
https://doi.org/10.1007/s00170-023-12657-7 - Filippidis, P., Papazetis, G., Vosniakos, G.-C. (2020). Process parameter investigation for 3D printing of cellular structured parts. Procedia Manufacturing, 51, 717–724.
https://doi.org/10.1016/j.promfg.2020.10.101 - Armillotta, A., Bellotti, M., Cavallaro, M. (2018). Warpage of FDM parts: Experimental tests and analytic model. Robotics and Computer-Integrated Manufacturing, 50, 140–152.
https://doi.org/10.1016/j.rcim.2017.09.007 - Kozior, T., Bochnia, J., Bochenek, A., Malara, D., Nawotka, M., Janša, J., Hajnyš, J., Wójtowicz, A., Měsíček, J. (2024). Estimating the uncertainty of measurements for various methods and 3D printed parts. Applied Sciences, 14 (8), 3506.