Study of a 2 kN·m Torque Transducer Tested at GUM and PTB, Including Creep Behaviour
References
- Kaygusuz, K. (2009). Wind power for a clean and sustainable energy future. Energy Sources, Part B: Economics, Planning, and Policy, 4 (1), 122-133. https://doi.org/10.1080/15567240701620390
- Tavner, P. (2008). Wind power as a clean-energy contributor. Energy Policy, 36 (12), 4397-4400. https://doi.org/10.1016/j.enpol.2008.09.033
- Hannan, M., Al-Shetwi, A. Q., Mollik, M. S., Ker, P. J., Mannan, M., Mansor, M., Al-Masri, H. M. K., Mahlia, T. M. I. (2023). Wind energy conversions, controls, and applications: A review for sustainable technologies and directions. Sustainability, 15 (5), 3986. https://doi.org/10.3390/su15053986
- Gnatowska, R., Moryn-Kucharczyk, E. (2019). Current status of wind energy policy in Poland. Renewable Energy, 135, 232-237. https://doi.org/10.1016/j.renene.2018.12.015
- European Parliament, Council of the European Union (2009). Directive 2009/28/EC of the European Parliament and of the Council of 23 April 2009 on the promotion of the use of energy from renewable sources and amending and subsequently repealing Directives 2001/77/EC and 2003/30/EC. Official Journal of the European Union, L140/16.
- Yang, W., Tavner, P. J., Crabtree, C. J., Wilkinson, M. (2010). Cost-effective condition monitoring for wind turbines. IEEE Transactions on Industrial Electronics, 57 (1), 263-271. https://doi.org/10.1109/TIE.2009.2032202
- Keysan, O., Mueller, M. (2015). A modular and cost effective superconducting generator design for offshore wind turbines. Superconductor Science and Technology, 28 (3), 034004. https://doi.org/10.1088/0953-2048/28/3/034004
- German Institute for Standardisation. (2022). Materials testing machines - Calibration of static torque measuring devices. Standard DIN 51309:2022-08.
- Brüge, A., Konya, R. (2005). Investigation on transducers for transfer or reference in continuous torque calibration. In 19th Conference on Force, Mass and Torque Measurement. IMEKO.
- Brüge, A. (2010). Creep measurements in reference torque calibration machines. In 21st TC3 Conference on Measurement of Force, Mass and Torque. IMEKO.
- Physikalisch-Technische Bundesanstalt. (2011). Creep measurements on precision torque transducers in comparison.
- Weidinger, P., Foyer, G., Ala-Hiiro, J., Schlegel, C., Kumme, R. (2018). Investigations towards extrapolation approaches for torque transducer characteristics. In Journal of Physics: Conference Series, 1065, 042057. https://doi.org/10.1088/1742-6596/1065/4/042057
- Fidelus, J., Puchalski, J., Trych-Wildner, A., Weidinger, P. (2023). The creep behaviour of a 2 kN•m torque transducer tested at GUM and PTB. In 2023 14th International Conference on Measurement. IEEE, 203-206. https://doi.org/10.23919/MEASUREMENT59122.2023.10164420
- Fidelus, J. D., Puchalski, J., Trych-Wildner, A., Urbański, M. K., Weidinger, P. (2023). Estimation of uncertainty for the torque transducer in MNm range— Classical approach and fuzzy sets. Energies, 16 (16), 6064. https://doi.org/10.3390/en16166064
- International Organization for Standardization (ISO). (2011). Metallic materials: Calibration of force-proving instruments used for the verification of uniaxial testing machines. Standard ISO 376:2011.
- Wozniak, M., Röske, D. (2015). Investigation of the calibration and measurement capabilities of the new 5 kN·m torque calibration machine at GUM. In XXI IMEKO World Congress “Measurement in Research and Industry”. IMEKO.
- Fidelus, J. D., Cybul, K. (2020). Realizacja projektu EMPIR JRC 18SIB08 “Comprehensive traceability for force metrology services” w Głównym Urzędzie Miar (Implementation of the EMPIR JRC 18SIB08 “Comprehensive traceability for force metrology services” project at the Central Office of Measures). In Metrologia naukowa, normatywna i przemysłowa: Wybrane zagadnienia. Wydawnictwo Politechniki Śląskiej, 78-90. ISBN 978-83-7880-737-7. (in Polish)
- Physikalisch-Technische Bundesanstalt. (2021). Calibration certificate up to 1 kNm issued by PTB. Serial no. 193840001.
- Puchalski, J. G., Fidelus, J. D., Fotowicz, P. (2024). Algorithms utilized for creep analysis in torque transducers for wind turbines. Algorithms, 17 (2), 77. https://doi.org/10.3390/a17020077
DOI: https://doi.org/10.2478/msr-2024-0012 | Journal eISSN: 1335-8871
Language: English
Page range: 88 - 94
Submitted on: Aug 1, 2023
Accepted on: Mar 12, 2024
Published on: Apr 13, 2024
In partnership with: Paradigm Publishing Services
Publication frequency: Volume open
Keywords:
Related subjects:
© 2024 Janusz D. Fidelus, Anna Trych-Wildner, Jacek Puchalski, Paula Weidinger, published by Slovak Academy of Sciences, Institute of Measurement Science
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.