References
- Phate MR, Toney SB. Modeling and prediction of WEDM performance parameters for Al/SiCp MMC using dimensional analysis and artificial neural network. Eng Sci Technol Int J. 2019;22(2):468–76. https://doi.org/10.1016/j.jestch.2018.12.002
- Karthik S, Prakash KS, Gopal PM, Jothi S. Influence of materials and machining parameters on WEDM of Al/AlCoCrFeNiMo0. 5 MMC. Mater Manuf Process. 2019;34(7):759–68. https://doi.org/10.1080/10426914.2019.1594250
- Ramraji K, Rajkumar K, Selvakumar G. Investigations on the influence of particle reinforcement and wire materials on the surface quality and machining characteristics of AA6061-TiB2 alloy in WEDM. Surf Topogr Metrol Prop. 2021;9(3):035029.
- Chen Z, Zhou H, Wu C, Zhang G, Yan H. A new wire electrode for improving the machining characteristics of high-volume fraction SiCp/Al composite in WEDM. Materials. 2022;15(12):4098.
- Garg SK, Manna A, Jain A. Investigation and analysis of surface veracity and parametric aspects during wireEDM of Al/ZrO2 (p)-metal matrix composite. Arab J Sci Eng. 2022; 47:8417–38. https://doi.org/10.1007/s13369-021-05531-9
- Prakash JU, Sivaprakasam P, Garip I, Juliyana SJ, Elias G, Kalusuraman G, et al. Wire electrical discharge machining (WEDM) of hybrid composites (Al-Si12/B4C/fly Ash). J Nanomater. 2021; 2021:1–10. https://doi.org/10.1155/2021/2503673
- Mythili T, Thanigaivelan R. Optimization of wire EDM process parameters on Al6061/Al2O3 composite and its surface integrity studies. Bull Pol Acad Sci Tech Sci. 2020; 68:1403–12.
- Vijay Praveen D, Ranga Raju D, Raju J. Assessment of optimal parameters of wire EDM on Ni-coated Al2O3p/AA7075 MMCs using PCA coupled GRA. Arab J Sci Eng. 2021;46(8):7953–66.
- Juliyana SJ, Prakash JU. Optimization of machining parameters for wire EDM of AMCs (LM5/ZrO2) using Taguchi technique. INCAS Bull. 2022;14(1):57–68.
- Lenin N, Sivakumar M, Selvakumar G, Rajamani D, Sivalingam V, Gupta MK, et al. Optimization of process control parameters for WEDM of Al-LM25/Fly Ash/B4C hybrid composites using evolutionary algorithms: a comparative study. Metals. 2021;11(7):1105.
- Kavimani V, Prakash KS, Thankachan T. Multi-objective optimization in WEDM process of graphene–SiC-magnesium composite through hybrid techniques. Measurement. 2019; 145:335–49.
- Lajis MA, Ahmad A, Yusuf NK, Azami AH, Wagiman A. Mechanical properties of recycled aluminium chip reinforced with alumina (Al2O3) particle. Mater Sci Eng Technol; 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering (ICMMPE-2016). 2017; 48:306–10. https://doi.org/10.1002/mawe.201600778
- Doreswamy D, Bongale AM, Piekarski M, Bongale A, Kumar S, Pimenov DY, et al. Optimization and modeling of material removal rate in wire-EDM of silicon particle reinforced Al6061 composite. Materials. 2021;14(21):6420.
- Krishnan PK, Christy JV, Arunachalam R, Mourad AHI, Muraliraja R, Al-Maharbi M, et al. Production of aluminum alloy-based metal matrix composites using scrap aluminum alloy and waste materials: influence on microstructure and mechanical properties. J Alloys Compd. 2019; 784:1047–61.
- Sathish T, Mohanavel V, Ansari K, Saravanan R, Karthick A, Afzal A, et al. Synthesis and characterization of mechanical properties and wire cut EDM process parameters analysis in AZ61 magnesium alloy + B4C + SiC. Materials. 2021;14(13):3689. https://doi.org/10.3390/ma14133689
- Thiraviam R, Ravisankar V, Kumar P, Thanigaivelan R, Arunachalam R. A novel approach for the production and characterisation of aluminium–alumina hybrid metal matrix composites. Mater Res Express. 2020;7(4):046512.
- Sharma P, Chakradhar D, Narendranath S. Effect of wire material on productivity and surface integrity of WEDM-processed Inconel 706 for aircraft application. J Mater Eng Perform. 2016;25(9):3672–81. https://doi.org/10.1007/s11665-016-2216-z
- Kumar N, Kumari S, Abhishek K, Nandi G, Ghosh N. Study on various parameters of WEDM using different optimization techniques: a review. Mater Today Proc. 2022; 62:4018–24.
- Saha S, Maity SR, Dey S. Particle swarm optimization-based search for optimal operating condition in WEDM operation of A286 superalloy. In: Recent advancements in mechanical engineering. Singapore: Springer; 2023. pp. 577–85.
- Kalita K, Ghadai RK, Chakraborty SA. comparative study on multi-objective Pareto optimization of WEDM process using nature-inspired metaheuristic algorithms. Int J Interact Des Manuf. 2022; 11:1–8.