Vibration Tests of a Turbine Blade with Internal Damping Manufactured using Additive Technology
References
- Braun, S. G., Ewins, D. J., & Rao, S. S. (Eds.). (2002). Encyclopedia of vibration. Academic Press.
- Cieślak, S. (2018). Evaluation of ground vibration tests reliability [Doctoral dissertation]. Institute of Aviation.
- Csaba, G., & Andersson, M. (1997). Optimization of friction damper weight, simulation and experiments [Paper presentation]. ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition, Orlando, USA.
https://doi.org/10.1115/97-GT-115 - El-Aini, Y., deLaneuville, R., Stoner, A., & Capece, V. (1997, July). High cycle fatigue of turbomachinery components – Industry perspective [Paper presentation]. 33rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Seattle, USA.
https://doi.org/10.2514/6.1997-3365 - Goldin, A., Scott-Emuakpor, O., George, T., Runyon, B., & Cobb, R. (2021). Structural dynamic and inherent damping characterization of additively manufactured airfoil components. Journal of Engineering for Gas Turbines and Power, 143(5), Article 051022.
https://doi.org/10.1115/1.4050022 - Hanson, M. P. (1956). A vibration damper for axial-flow compressor blading. Proceedings of the Society for Experimental Stress Analysis, XIV.
- International Organization for Standardization & ASTM International. (2021). Additive manufacturing – General principles – Fundamentals and vocabulary (ISO/ASTM Standard No. 52900:2021). ISO.
- Kim, R. G., Abisado, M., Villaverde, J., & Sampedro, G. A. (2023). A survey of image-based fault monitoring in additive manufacturing: Recent developments and future directions. Sensors, 23(15), Article 6821.
https://doi.org/10.3390/s23156821 - Klepacki, W. (1975). Non-classical issues of vibration of aircraft turbine blades [Doctoral dissertation]. Institute of Aviation.
- Kozak, J., Zakrzewski, T., Witt, M., & Dębowska-Wąsak, M. (2021). Selected problems of additive manufacturing using SLS/SLM processes. Transactions on Aerospace Research, 2021(1), 24–44.
https://doi.org/10.2478/tar-2021-0003 - Krzymień, W. (2019). Identification of non-linear vibrations of aircraft structures. Łukasiewicz Research Network – Institute of Aviation.
- Loughborough University. (n.d.). About additive manufacturing: The 7 categories of additive manufacturing.
https://www.lboro.ac.uk/research/amrg/about/the7categoriesofadditivemanufacturing/ - Moneta, G., Fedasz, M., Szmidt, M., Cieślak, S., & Krzymień, W. (2022a). Increasing of damping in the turbine blade through multi-functional design and advantages of additive manufacturing technology [Paper presentation]. ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, Rotterdam, Netherlands.
https://doi.org/10.1115/GT2022-83889 - Moneta, G., Fedasz, M., Szmidt, M., Cieślak, S., & Krzymień, W. (2022b). Advantages of additive manufacturing technology in damping improvement of turbine blading [Paper presentation]. International Additive Manufacturing Conference 2022.
https://doi.org/10.1115/IAM2022-96752 - Osiewicz, M., Cieślak, S., & Bielecki, M. (2022). Determination of the geometric properties of a jet engine fan blades based on modal vibration testing. Transactions on Aerospace Research, 2022(3), 56–74.
https://doi.org/10.2478/tar-2022-0017 - Osiński, Z. (1998). Damping of vibrations. CRC Press.
- Peter, J. (1999). The history of aircraft gas turbine engine development in the United States: A tradition of excellence. ASME IGTI.
- Płatek, P., Sienkiewicz, J., Janiszewski, J., & Jiang, F. (2020). Investigations on mechanical properties of lattice structures with different values of relative density made from 316L by selective laser melting (SLM). Materials, 13(9), Article 2204.
https://doi.org/10.3390/ma13092204 - Polytec GmbH. (2010). Dynamic stress and strain measurement.
https://www.polytec.com/fileadmin/website/vibrometry/pdf/OM_TP_InFocus_Strain_E.pdf - Scott-Emuakpor, O., Beck, J., Runyon, B., & George, T. (2021). Determining unfused powder threshold for optimal inherent damping with additive manufacturing. Additive Manufacturing, 38, Article 101739.
https://doi.org/10.1016/j.addma.2020.101739 - Siemens Industry Software NV. (2015). LMS Test.Lab MIMO normal modes testing user manual (Vol. 15A). Siemens.
- Szmidt, M. (2014). Rectangular composite plate vibration active damping with bonded piezoelectric elements [Doctoral dissertation]. Warsaw University of Technology.
- Szwedowicz, J. (2010). 30-year anniversary of friction damper technology in turbine blades. Mechanical Engineering, 132(04), 54–55.
https://doi.org/10.1115/1.2010-Apr-8 - Szwedowicz, J., Secall-Wimmel, T., & Dünck-Kerst, P. (2008). Damping performance of axial turbine stages with loosely assembled friction bolts: The non-linear dynamic assessment. Journal of Engineering for Gas Turbines and Power, 130(3), 1–14.
https://doi.org/10.1115/1.2838998 - Uchanin, V. (2021). Enhanced eddy current techniques for detection of surface-breaking cracks in aircraft structures. Transactions on Aerospace Research, 2021(1), 1–14.
https://doi.org/10.2478/tar-2021-0001 - Witoś, M. (2008). On the modal analysis of a cracking compressor blade. Research Works of Air Force Institute of Technology, 23, 21–36.
- Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015). Review of selective laser melting: Materials and applications. Applied Physics Reviews, 2(4), Article 041101.
https://doi.org/10.1063/1.4935926 - Yepifanov, S., & Brunak, A. (2021). Impact of load retention on aircraft engine parts under real flight cycle conditions in service life monitoring. Transactions on Aerospace Research, 2021(3), 47–57.
https://doi.org/10.2478/tar-2021-0016
DOI: https://doi.org/10.2478/fas-2025-0006 | Journal eISSN: 2300-7591
Language: English
Submitted on: Dec 31, 2024
Accepted on: Feb 3, 2026
Published on: Jun 6, 2026
Published by: ŁUKASIEWICZ RESEARCH NETWORK – INSTITUTE OF AVIATION
In partnership with: Paradigm Publishing Services
Publication frequency: 1 issue per year
Keywords:
Related subjects:
© 2026 Sławomir Cieślak, Grzegorz Moneta, Michał Szmidt, Wiesław Krzymień, Andrzej Leski, Michał Fedasz, published by ŁUKASIEWICZ RESEARCH NETWORK – INSTITUTE OF AVIATION
This work is licensed under the Creative Commons Attribution 4.0 License.