Experimental and Numerical Investigation of the Effects of Rotational Speed and Feed Rate on Drilling-Induced Residual Stress in AL2024-T351
References
- Aamir, M., Giasin, K., Tolouei-Rad, M., & Vafadar, A. (2020). A review: Drilling performance and hole quality of aluminium alloys for aerospace applications. Journal of Materials Research and Technology, 9(6), 12484–12500.
https://doi.org/10.1016/j.jmrt.2020.09.003 - Aslam, M. A., Rayhan, S. B., Ke, Z., & Yu, W. J. (2020). Ballistic gelatin Lagrange Mooney-Rivlin material model as a substitute of bird in finite element bird strike case studies. Latin American Journal of Solids and Structures, 17(6).
https://doi.org/10.1590/1679-78256215 - El-Axir, M. H., Elkhabeery, M. M., & Okasha, M. M. (2017). Modeling and parameter optimization for surface roughness and residual stress in dry turning process. Engineering, Technology & Applied Science Research, 7(5), 2047–2055.
https://doi.org/10.48084/etasr.1560 - Liang, X., Liu, Z., Wang, B., & Hou, X. (2018). Modeling of plastic deformation induced by thermo-mechanical stresses considering tool flank wear in high-speed machining Ti-6Al-4V. International Journal of Mechanical Sciences, 140, 1–12.
https://doi.org/10.1016/j.ijmecsci.2018.02.031 - Matsumura, T., Akao, Y., & Tamura, S. (2024). Evaluation approach for residual stress in drilling of aluminum alloy. International Journal of Automation Technology, 18(3), 406–416.
https://doi.org/10.20965/ijat.2024.p0406 - Paul, A., Kapoor, S. G., & DeVor, R. E. (2005). A chisel edge model for arbitrary drill point geometry. Journal of Manufacturing Science and Engineering, 127(1), 23–32.
https://doi.org/10.1115/1.1826076 - Qi, Z., Li, B., & Xiong, L. (2014). The formation mechanism and the influence factor of residual stress in machining. Frontiers of Mechanical Engineering, 9(3), 265–269.
https://doi.org/10.1007/s11465-014-0311-0 - Rasti, A., Sadeghi, M. H., & Farshi, S. S. (2018). An analytical study on residual stresses in drilling of hardened steel. The International Journal of Advanced Manufacturing Technology, 99(9–12), 2389–2405.
https://doi.org/10.1007/s00170-018-2587-4 - Savio, A., & Jose, M. (2018). Residual stress analysis in drilling. IJSRD – International Journal for Scientific Research & Development, 6(4), 157–160.
https://www.ijsrd.com/articles/IJSRDV6I40153.pdf - Sujan Kumar, M., & Deivanathan, R. (2021). Effect of process parameters on drilling – An overview. Materials Today: Proceedings, 46, 1401–1406.
https://doi.org/10.1016/j.matpr.2021.02.574 - Sun, L., Jin, Y., & Chen, J. (2016). Research on the residual stress of glass ceramic based on rotary ultrasonic drilling. In W. Jiang, L. Yang, O. Riemer, S. Li, & Y. Wan (Eds.), SPIE Proceedings, 9683, p. 96831C. SPIE.
https://doi.org/10.1117/12.2243008 - Ugural, A. C. (2003). Advanced strength and applied elasticity. Prentice Hall.
- Zhang, W., Chabok, A., Kooi, B. J., & Pei, Y. (2022). Additive manufactured high entropy alloys: A review of the microstructure and properties. Materials & Design, 220, article 110875.
https://doi.org/10.1016/j.matdes.2022.110875
DOI: https://doi.org/10.2478/fas-2025-0005 | Journal eISSN: 2300-7591
Language: English
Submitted on: Mar 5, 2026
Accepted on: May 11, 2026
Published on: Jun 4, 2026
Published by: ŁUKASIEWICZ RESEARCH NETWORK – INSTITUTE OF AVIATION
In partnership with: Paradigm Publishing Services
Publication frequency: 1 issue per year
Keywords:
Related subjects:
© 2026 Hareth Amer Mohammed, Abdulhaqq A Hamid, published by ŁUKASIEWICZ RESEARCH NETWORK – INSTITUTE OF AVIATION
This work is licensed under the Creative Commons Attribution 4.0 License.