Volumetric Balance and Marshall Response of AC-WC Mixtures Incorporating Kampar River Sand as a Partial Replacement for Stone Dust
References
- Abdullah, W. S., Obaidat, M. T., & Abu-Sa'da, N. M. (1998). Influence of aggregate type and gradation on voids of asphalt concrete pavements. Journal of Materials in Civil Engineering, 10(2), 76–85.
https://doi.org/10.1061/(ASCE)0899-1561(1998)10:2(76) . - Albayati, A. H., & Abdulsattar, H. (2020). Performance evaluation of asphalt concrete mixes under varying replacement percentages of natural sand. Results in Engineering, 7, 100131.
https://doi.org/10.1016/j.rineng.2020.100131 . - Alsheyab, M. A., Al-Sugaier, A. O., Rahman, M. L., & Emami Ahari, H. (2024). Performance evaluation of Bailey method used in asphalt mixtures containing natural river sands. International Journal of Transportation Science and Technology, 16, 50–67.
https://doi.org/10.1016/j.ijtst.2023.10.009 . - American Association of State Highway and Transportation Officials. (2022). Standard method of test for resistance of compacted asphalt mixtures to moisture-induced damage (AASHTO T 283-22).
- American Association of State Highway and Transportation Officials. (2023). Standard method of test for Hamburg wheel-track testing of compacted asphalt mixtures (AASHTO T 324-23).
- Asphalt Institute. (2014). Asphalt mix design methods (MS-2, 7th ed.).
- ASTM International. (2015). Standard test method for Marshall stability and flow of asphalt mixtures (ASTM D6927/D6927M-15).
- Basri, D. R., Ramdhani, F., & Wardani, F. A. (2022). Utilization of sawdust ash and Portland cement as filler in asphalt concrete-wearing course mixtures [In Indonesian]. Racic: Rab Construction Research, 7(2), 152–163.
https://doi.org/10.36341/racic.v7i2.3066 . - Directorate General of Highways. (2018). General specifications 2018 for road and bridge construction (Revision 2) [In Indonesian]. Ministry of Public Works and Housing.
- Fayissa, B., Gudina, O., & Yigezu, B. (2020). Application of sawdust ash as filler material in asphaltic concrete production. Civil and Environmental Engineering, 16(2), 351–359.
https://doi.org/10.2478/cee-2020-0035 . - Huang, Y. H. (2004). Pavement analysis and design (2nd ed.). Pearson Prentice Hall.
- Kandhal, P. S., Foo, K. Y., & Mallick, R. B. (1998). A critical review of VMA requirements in Superpave (NCAT Report 98-1). National Center for Asphalt Technology.
- Kamran, M., Khan, M. T., Khan, D., Hasan, M. R. M., Khan, N., & Ullah, M. (2023). Experimental evaluation of hot mix asphalt using coal bottom ash as partial filler replacement. Roads and Bridges – Drogi i Mosty, 22(2), 167–179.
https://doi.org/10.7409/rabdim.023.008 . - Khan, D., Khan, R., Khan, M. T., Alam, M., & Hassan, T. (2023a). Performance of hot-mix asphalt using polymer-modified bitumen and marble dust as a filler. Journal of Traffic and Transportation Engineering (English Edition), 10(3), 385–398.
https://doi.org/10.1016/j.jtte.2022.12.002 . - Khan, N., Karim, F., Latif Qureshi, Q. B. A. I., Mufti, S. A., Rabbani, M. B. A., Khan, M. S., & Khan, D. (2023b). Effect of fine aggregates and mineral fillers on the permanent deformation of hot mix asphalt. Sustainability, 15(13), 10646.
https://doi.org/10.3390/su151310646 . - Li, N., Hao, P., Yao, Y., & Zhang, C. (2023). The implementation of balanced mix design in asphalt materials: A review. Construction and Building Materials, 402, 132919.
https://doi.org/10.1016/j.conbuildmat.2023.132919 . - Mallick, R. B., & El-Korchi, T. (2017). Pavement engineering: Principles and practice (3rd ed.). CRC Press.
- Standardization Agency of Indonesia. (1990). Metode pengujian berat jenis dan penyerapan air agregat halus [Test method for specific gravity and water absorption of fine aggregate] (SNI 03-1970-1990). BSN.
- Standardization Agency of Indonesia. (2002). Metode pengujian kekentalan kinematis aspal cair [Test method for kinematic viscosity of liquid asphalts] (SNI 06-6837-2002). BSN.
- Standardization Agency of Indonesia. (2008). Cara uji keausan agregat dengan mesin abrasi Los Angeles [Test method for aggregate abrasion using the Los Angeles machine] (SNI 2417:2008). BSN.
- Standardization Agency of Indonesia. (2011a). Cara uji daktilitas aspal [Test method for asphalt ductility] (SNI 2432:2011). BSN.
- Standardization Agency of Indonesia. (2011b). Cara uji penetrasi aspal [Test method for asphalt penetration] (SNI 2456:2011). BSN.
- Standardization Agency of Indonesia. (2011c). Cara uji titik lembek aspal dengan alat cincin dan bola [Test method for asphalt softening point using the ring-and-ball apparatus] (SNI 2434:2011). BSN.
- Standardization Agency of Indonesia. (2011d). Cara uji berat jenis aspal keras [Test method for specific gravity of semi-solid bituminous materials] (SNI 2441:2011). BSN.
- Standardization Agency of Indonesia. (2012). Metode uji untuk analisis saringan agregat halus dan agregat kasar [Test method for sieve analysis of fine and coarse aggregates] (SNI ASTM C136:2012). BSN.
- Standardization Agency of Indonesia. (2016a). Metode uji berat jenis dan penyerapan air agregat kasar [Test method for specific gravity and water absorption of coarse aggregate] (SNI 1969:2016). BSN.
- Standardization Agency of Indonesia. (2016b). Cara uji kadar lumpur dalam agregat halus [Test method for silt content in fine aggregate] (SNI 1960:2016). BSN.
- Pan, T., Tutumluer, E., & Carpenter, S. H. (2006). Effect of coarse aggregate morphology on permanent deformation behavior of hot mix asphalt. Journal of Transportation Engineering, 132(7), 580–589.
https://doi.org/10.1061/(ASCE)0733-947X(2006)132:7(580) . - Porto, M., Caputo, P., Loise, V., Eskandarsefat, S., Teltayev, B., & Rossi, C. O. (2019). Bitumen and bitumen modification: A review on latest advances. Applied Sciences, 9(4), 742.
https://doi.org/10.3390/app9040742 . - Pouranian, M. R., & Haddock, J. E. (2018). Determination of voids in the mineral aggregate and aggregate skeleton characteristics of asphalt mixtures using a linear-mixture packing model. Construction and Building Materials, 188, 292–304.
https://doi.org/10.1016/j.conbuildmat.2018.08.101 . - Vavrik, W. R., Pine, W. J., Huber, G., Carpenter, S. H., & Bailey, R. (2001). The Bailey method of gradation evaluation: The influence of aggregate gradation and packing characteristics on voids in mineral aggregate. Journal of the Association of Asphalt Paving Technologists, 70, 132–175.
DOI: https://doi.org/10.2478/cee-2027-0021 | Journal eISSN: 2199-6512 (formerly 1336-5835) | Journal ISSN: 1336-5835
Language: English
Submitted on: Jul 12, 2026
Accepted on: Aug 6, 2026
Published on: Sep 17, 2026
Published by: University of Žilina
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2026 Doni Rinaldi Basri, Rahmat Tisnawan, Novreta Ersyi Darfia, Zulham Shadri, published by University of Žilina
This work is licensed under the Creative Commons Attribution 4.0 License.