Additive Manufacturing and Advanced Technology with Materials of Polymer, Concrete and Clay in Construction Industry and Architecture
References
- Alonso Madrid, J., Sotorrío Ortega, G., Gorostiza Carabaño, J., Olsson, N. O. E., & Tenorio Ríos, J. A. (2023). 3D Claying: 3D Printing and Recycling Clay. Crystals, 13(3), 375.
https://doi.org/10.3390/cryst13030375 . - Al-Qutaifi, S., Nazari, A., & Bagheri, A. (2018). Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing. Construction and Building Materials, 176, 690–699.
https://doi.org/10.1016/j.conbuildmat.2018.04.195 . - Al Rashid, A., Khan, S. A., G. Al-Ghamdi, S., & Koç, M. (2021). Additive manufacturing of polymer nanocomposites: Needs and challenges in materials, processes, and applications. Journal of Materials Research and Technology, 14, 910–941.
https://doi.org/10.1016/j.jmrt.2021.07.016 . - Ahmed, G. H., Askandar, N. H., & Jumaa, G. B. (2022). A review of largescale 3DCP: Material characteristics, mix design, printing process, and reinforcement strategies. Structures, 43, 508–532.
https://doi.org/10.1016/j.istruc.2022.06.068 . - Ahmed, G. H. (2023). A review of “3D concrete printing”: Materials and process characterization, economic considerations and environmental sustainability. Journal of Building Engineering, 66, 105863.
https://doi.org/10.1016/j.jobe.2023.105863 . - Berman, B. (2012). 3-D printing: The new industrial revolution. Business Horizons, 55(2), 155–162.
https://doi.org/10.1016/j.bushor.2011.11.003 . - Buswell, R. A., Leal de Silva, W. R., Jones, S. Z., & Dirrenberger, J. (2018). 3D printing using concrete extrusion: A roadmap for research. Cement and Concrete Research, 112, 37–49.
https://doi.org/10.1016/j.cemconres.2018.05.006 . - Ceradbud (2025) Available on:
https://www.ceradbud.pl/ (19.12.2025). - Dadkhah, M., Tulliani, J.-M., Saboori, A., & Iuliano, L. (2023). Additive manufacturing of ceramics: Advances, challenges, and outlook. Journal of the European Ceramic Society, 43(15), 6635–6664.
https://doi.org/10.1016/j.jeurceramsoc.2023.07.033 . - Feng, P., Meng, X., Chen, J.-F., & Ye, L. (2015). Mechanical properties of structures 3D printed with cementitious powders. Construction and Building Materials, 93, 486–497.
https://doi.org/10.1016/j.conbuildmat.2015.05.132 . - Geocalce Tenace (2025) Available on:
https://it.kerakoll.com// (19.12.2025). - Hurtig, K., Čítek, D., Holý, M., Koteš, P., & Čítek, A. (2025). Experimental Assessment of Durability in 3D Printed Cementitious Materials. Civil and Environmental Engineering, 21(2), 1384–1401.
https://doi.org/10.2478/cee-2025-0101 . - Hilal, A. A., Nader, A. S., & Kurji, B. M. (2024). Producing Sustainable Lightweight Geopolymer Concrete Using Waste Materials. Civil and Environmental Engineering, 20(2), 1120–1128.
https://doi.org/10.2478/cee-2024-0081 . - Helle, R. H., & Lemu, H. G. (2021). A case study on use of 3D scanning for reverse engineering and quality control. Materials Today: Proceedings, 45, 5255–5262.
https://doi.org/10.1016/j.matpr.2021.01.828 . - Katzer, J., Skoratko, A., Szatkiewicz, T. & Sucharda, O. (2025) Shaping mechanical properties of concrete elements by 3D-printed plastic gyroid reinforcing elements, Structural Concrete, 26 (6), pp. 6832 – 6835 DOI: 10.1002/suco.70103.
- Khan, M. S., Sanchez, F., & Zhou, H. (2020). 3-D printing of concrete: Beyond horizons. Cement and Concrete Research, 133, 106070.
https://doi.org/10.1016/j.cemconres.2020.106070 . - Lim, S. G., & Tan, M. J. (2024). A rheological model for concrete additive manufacturing. Construction and Building Materials, 451, 138771.
https://doi.org/10.1016/j.conbuildmat.2024.138771 . - Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017). Polymers for 3D Printing and Customized Additive Manufacturing. Chemical Reviews, 117(15), 10212–10290.
https://doi.org/10.1021/acs.chemrev.7b00074 . - Lu, B., Weng, Y., Li, M., Qian, Y., Leong, K. F., Tan, M. J., & Qian, S. (2019). A systematical review of 3D printable cementitious materials. Construction and Building Materials, 207, 477–490.
https://doi.org/10.1016/j.conbuildmat.2019.02.144 . - Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., & Thorpe, T. (2012). Mix design and fresh properties for high-performance printing concrete. Materials and Structures, 45(8), 1221–1232.
https://doi.org/10.1617/s11527-012-9828-z . - Marcalikova, Z., Gandel, R., Jerabek, J., & Varak, J. (2024). Selected Properties and Microstructure of Concrete with Tire Rubber Granulate as Recycled Material in Construction Industry. Civil and Environmental Engineering, 20(2), 754–766.
https://doi.org/10.2478/cee-2024-0057 . - Ma, G., & Wang, L. (2017). A critical review of preparation design and workability measurement of concrete material for largescale 3D printing. Frontiers of Structural and Civil Engineering, 12(3), 382–400.
https://doi.org/10.1007/s11709-017-0430-x . - Mohammed, Z. M., Abdulhameed, A. A., & Kazim, H. K. (2022). Effect of Alkali - Activated Natural Pozzolan on Mechanical Properties of Geopolymer Concrete. Civil and Environmental Engineering, 18(1), 312–320.
https://doi.org/10.2478/cee-2022-0029 . - Mohamed, O., Mishra, A., & Isam, F. (2025). An overview of 3D printed concrete for building structures: Material properties, sustainability, future opportunities, and challenges. Structures, 78, 109284.
https://doi.org/10.1016/j.istruc.2025.109284 . - Mikula, K., Skrzypczak, D., Izydorczyk, G., Warchoł, J., Moustakas, K., Chojnacka, K., & Witek-Krowiak, A. (2020). 3D printing filament as a second life of waste plastics-a review. Environmental Science and Pollution Research, 28(10), 12321–12333.
https://doi.org/10.1007/s11356-020-10657-8 . - Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering, 143, 172–196.
https://doi.org/10.1016/j.compositesb.2018.02.012 . - Przekop, R. E., Konieczna, R., Głowacka, J., Sztorch, B., Głowacki, M., & Kotecka, B. (2025). 3D printing in art: use of thermoplastics and ceramics-the current state and limitations resulting from the possibilities of technology. Progress in Additive Manufacturing, 10(9), 5851–5881.
https://doi.org/10.1007/s40964-025-01015-6 . - Peknikova, A., Jerabek, J., Gandel, R., Gabor, R., Bilek, V., & Sucharda, O. (2025). Physical–Mechanical Behavior of High-Performance Concrete and Ordinary Concrete with Portland Cement Mixtures After Exposure to Selected Durability Tests Including High Thermal Stress. Buildings, 15(7), 1029
https://doi.org/10.3390/buildings15071029 . - Shahrubudin, N., Lee, T. C., & Ramlan, R. (2019). An Overview on 3D Printing Technology: Technological, Materials, and Applications. Procedia Manufacturing, 35, 1286–1296.
https://doi.org/10.1016/j.promfg.2019.06.089 . - Sucharda, O. & Dlabikova, I. (2026) 3D ceramic element with design aspect for construction applications, functional sample, VŠB-TUO, 2026.
- Sucharda O., Gandel R., Cmiel P., Jerabek J. & Bilek V. (2024) Utilization of High-Performance Concrete Mixtures for Advanced Manufacturing Technologies Buildings, 14 (8), art. no. 2269, DOI: 10.3390/buildings14082269.
- Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017). 3D printing of polymer matrix composites: A review and prospective. Composites Part B: Engineering, 110, 442–458.
https://doi.org/10.1016/j.compositesb.2016.11.034 . - Wang, Y., Chen, M., Zhang, T., & Zhang, M. (2024). Hardening properties and microstructure of 3D printed engineered cementitious composites based on limestone calcined clay cement. Cement and Concrete Composites, 152, 105641.
https://doi.org/10.1016/j.cemconcomp.2024.105641 . - Yi, S., Oh, N., Min, K.-E., Shin, J.-S., & Kim, C. (2023). Thermo-Viscoelastic Characterization of 3D Printing Polymers. Applied Sciences, 13(5), 2876.
https://doi.org/10.3390/app13052876 .
DOI: https://doi.org/10.2478/cee-2026-0104 | Journal eISSN: 2199-6512 (formerly 1336-5835) | Journal ISSN: 1336-5835
Language: English
Submitted on: Jan 12, 2026
Accepted on: Apr 15, 2026
Published on: May 21, 2026
Published by: University of Žilina
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2026 Oldrich Sucharda, Zuzana Marcalikova, Radoslav Gandel, Jakub Kralovanec, Petr Cmiel, Libor Topolář, Ivona Dlabikova, published by University of Žilina
This work is licensed under the Creative Commons Attribution 4.0 License.