Effect of temperature and iron powder incorporation on the thermophysical properties of concrete
References
- Abdallah, Z., Pomeroy, J. W., Blasakis, N., Baltopoulos, A., & Kuball, M. (2024). Simultaneous Measurement of Thermal Conductivity and Volumetric Heat Capacity of Thermal Interface Materials Using Thermoreflectance. ACS Applied Electronic Materials, 6(7), 5183–5189.
https://doi.org/10.1021/acsaelm.4c00691 - Adeyanju, A. A., & Manohar, K. (2011). Effects of Steel Fibers and Iron Filings on Thermal and Mechanical Properties of Concrete for Energy Storage Application. Journal of Minerals and Materials Characterization and Engineering, 10.
https://doi.org/10.4236/jmmce.2011.1015111 - Al-Amin, Md., & Hossain, Z. (2024, October 9). Manufacturing Concrete with Recycled Iron as a Partial Replacement of Fine Aggregate. Proceedings of the International Conference on Industrial Engineering and Operations Management. 1st World Congress on Industrial Engineering and Operations Management, Detroit, USA.
https://doi.org/10.46254/wc01.20240160 - Asadi, I., Shafigh, P., Abu Hassan, Z. F. B., & Mahyuddin, N. B. (2018). Thermal conductivity of concrete – A review. Journal of Building Engineering, 20, 81–93.
https://doi.org/10.1016/j.jobe.2018.07.002 - Bakari, R., Samaouali, A., Fertahi, S. E.-D., Ouaazizi, K., Kanibou, F., & Haddadi, S. (2022). Experimental studies of the thermophysical properties of the white earth stabilized with Portland cement used for building construction (Morocco) [Preprint]. In Review.
https://doi.org/10.21203/rs.3.rs-1827507/v1 - Banerjee, D. K. (2021). A Review of Models for Heat Transfer in Steel and Concrete Members During Fire. Journal of Research of the National Institute of Standards and Technology, 126, 126030.
https://doi.org/10.6028/jres.126.030 - Barbir, D., Dabić, P., Jakić, M., & Weber, I. (2025). Evaluating the Heat of Hydration, Conductivity, and Microstructural Properties of Cement Composites with Recycled Concrete Powder. Buildings, 15(15), 2613.
https://doi.org/10.3390/buildings15152613 - Boussaq, C., Samaouali, A., Belarouf, S., Soulami, H., Ajani, M., Karim, I., Moufakkir, A., Douha, B., & Arbaoui, A. (2025). Experimental Analysis of Thermal Conductivity and Volumetric Heat Capacity in Concrete Incorporating HDPE Waste Plastic Powder as a Function of Temperature. Civil and Environmental Engineering, 21(1), 591–604.
https://doi.org/10.2478/cee-2025-0045 - Boy, J., Mitdank, R., Galazka, Z., & Fischer, S. F. (2022). Thermal conductivity, diffusivity and specific heat capacity of as-grown, degenerate single-crystalline ZnGa2O4. Materials Research Express, 9(6), 065902.
https://doi.org/10.1088/2053-1591/ac5f8a - Burduhos-Nergis, D. D. (2023). Special Issue “Advanced Engineering Cementitious Composites and Concrete Sustainability”. Materials, 16(7), Article 7.
https://doi.org/10.3390/ma16072582 - Chao, X., Han, C., Shao, C., Wang, C., Wen, P., & Wang, C. (2024). Recent Advances in Properties and Application Progress of Cement-Based Materials with Iron Tailing. Sustainability, 16(23).
https://doi.org/10.3390/su162310631 - Chen, R., Shangguan, H., Zhang, W., & Yang, K. (2024). Finite Element Method Simulation Study on the Temperature Field of Mass Concrete with Phase Change Material. Buildings, 14(9).
https://doi.org/10.3390/buildings14092755 - Cui, H., Zou, J., Gong, Z., Zheng, D., Bao, X., & Chen, X. (2022). Study on the thermal and mechanical properties of steel fibre reinforced PCM-HSB concrete for high performance in energy piles. Construction and Building Materials, 350, 128822.
https://doi.org/10.1016/j.conbuildmat.2022.128822 - Dehdezi, P. K., Hall, M. R., & Dawson, A. (2011). Thermophysical Optimization of Specialized Concrete Pavement Materials for Collection of Surface Heat Energy and Applications for Shallow Heat Storage. Transportation Research Record, 2240(1), 96–106.
https://doi.org/10.3141/2240-13 - Demezhko, D. Yu., Glazachev, I. V., & Konoplin, A. D. (2018). Complex Thermophysical Analysis of the Samples of Rocks Based on the Data of Measurements of Thermal Effusivity. Measurement Techniques, 61(1), 48–54.
https://doi.org/10.1007/s11018-018-1386-5 - Funda Akbulut, Z., Guler, S., & Khan, M. (2023). The effects of waste iron powder and steel fiber on the physical and mechanical properties of geopolymer mortars exposed to high temperatures. Structures, 58, 105398.
https://doi.org/10.1016/j.istruc.2023.105398 - Gao, Y., Chao, H., Zhou, M., Chen, J., Ouyang, X., Yang, X., Che, D., & Guo, Y. (2025). Insights into the impact of iron on rheological, hydration, and strength development in cement-based materials. Construction and Building Materials, 472, 140797.
https://doi.org/10.1016/j.conbuildmat.2025.140797 - Ghannam, S., Najm, H., & Vasconez, R. (2016). Experimental study of concrete made with granite and iron powders as partial replacement of sand. Sustainable Materials and Technologies, 9, 1–9.
https://doi.org/10.1016/j.susmat.2016.06.001 - Gustafsson, S. E., Mihiretie, B. M., & Gustavsson, M. K. (2023). Measurement of Thermal Transport in Solids with the Hot Disc Method. International Journal of Thermophysics, 45(1), 1.
https://doi.org/10.1007/s10765-023-03284-1 - Hager, I., Mróz, K., Tracz, T., Kočí, V., & Fiala, L. (2022). Equivalent thermal diffusivity of natural and recycled aggregate concrete at temperature up to 350 °C. Acta Polytechnica CTU Proceedings, 33, 207–211.
https://doi.org/10.14311/APP.2022.33.0207 - Harshitha, M., Agrawal, U. S., Chandra, S. S., Kumar, R., & Galagali, S. (2025). RETRACTED: Evaluating the feasibility of using iron powder as a partial replacement for fine aggregates in concrete: An AI-based modeling approach. Construction and Building Materials, 474, 140890.
https://doi.org/10.1016/j.conbuildmat.2025.140890 - Huang, K., Zhang, X., Lu, D., Xu, N., Gan, Y., & Han, X. (2021). The Role of Iron Tailing Powder in Ultra-High-Strength Concrete Subjected to Elevated Temperatures. Advances in Civil Engineering, 2021(1), 6681429.
https://doi.org/10.1155/2021/6681429 - Jin, L., Zhang, R., & Du, X. (2017). Characterisation of temperature-dependent heat conduction in heterogeneous concrete. Magazine of Concrete Research, 70(7), 325–339.
https://doi.org/10.1680/jmacr.17.00174 - Ju, Y., Liu, H., Liu, J., & Tian, K. (2011). Investigation on Thermophysical Properties of Reactive Powder Concrete. Science China Technological Sciences, 54, 3382–3403.
https://doi.org/10.1007/s11431-011-4536-4 - Kanibou, F., Moufakkir, A., Samaouali, A., Bakari, R., Ouaazizi, K., Arbaoui, A., & Charkaoui, A. (2024). Thermophysical Properties of Concrete Blended with Iron Powder and/or Iron Fibers. Civil and Environmental Engineering, 20(1), 293–306.
https://doi.org/10.2478/cee-2024-0023 - Khedaywi, T., Haddad, M., & Hwarie, S. (2025). Effect of Waste Iron Powder on Properties of Asphalt Concrete Mixtures: State of the Art. International Journal of Pavement Research and Technology, 18(1), 91–101.
https://doi.org/10.1007/s42947-023-00328-5 - Klemczak, B., Smolana, A., & Jędrzejewska, A. (2024). Modeling of Heat and Mass Transfer in Cement-Based Materials during Cement Hydration—A Review. Energies, 17(11).
https://doi.org/10.3390/en17112513 - Kodur, V. K. R., & Sultan, M. A. (2003). Effect of Temperature on Thermal Properties of High-Strength Concrete. Journal of Materials in Civil Engineering, 15(2), 101–107.
https://doi.org/10.1061/(ASCE)0899-1561(2003)15:2(101) - Lai, C., Zhao, Q., Zhang, Z., Zhang, H., Hou, S., & Zhao, J. (2021). Potential evaluation of flexible annular thermoelectric generator in photovoltaic system performance improvement: Energy and exergy perspectives. Energy Conversion and Management, 247, 114711.
https://doi.org/10.1016/j.enconman.2021.114711 - Largeau, M. A., Mutuku, R., & Thuo, J. (2018). Effect of Iron Powder (Fe2O3) on Strength, Workability, and Porosity of the Binary Blended Concrete. Open Journal of Civil Engineering, 8(4), Article 4.
https://doi.org/10.4236/ojce.2018.84029 - Lee, H.-S., & Kwon, S.-J. (2016). Effects of Magnetite Aggregate and Steel Powder on Thermal Conductivity and Porosity in Concrete for Nuclear Power Plant. Advances in Materials Science and Engineering, 2016(1), 9526251.
https://doi.org/10.1155/2016/9526251 - Lee, Y. H., Amran, M., Lee, Y. Y., Kueh, A. B. H., Kiew, S. F., Fediuk, R., Vatin, N., & Vasilev, Y. (2021). Thermal Behavior and Energy Efficiency of Modified Concretes in the Tropical Climate: A Systemic Review. Sustainability, 13(21).
https://doi.org/10.3390/su132111957 - Liu, K., Lu, L., Wang, F., & Liang, W. (2017). Constr. Build. Mater.
https://doi.org/10.1016/j.conbuildmat.2017.05.043 - Liu, X., Xu, H., Li, B., Zhang, C., Zhang, Y., Zhao, C., & Li, K. (2023). Investigation of the Mechanical Properties of Iron Tailings Concrete Subjected to Dry–Wet Cycle and Negative Temperature. Materials, 16(13), 4602.
https://doi.org/10.3390/ma16134602 - Mahmood, E. M., Allawi, A. A., & El-Zohairy, A. (2022). Analysis and Residual Behavior of Encased Pultruded GFRP I-Beam under Fire Loading. Sustainability, 14(20).
https://doi.org/10.3390/su142013337 - Martini, S. A., Khartabil, A., & Sabouni, R. (2022). Evaluation of Thermal Conductivity of Sustainable Concrete Having Supplementary Cementitious Materials (SCMs) and Recycled Aggregate (RCA) Using Needle Probe Test. Sustainability, 15(1).
https://doi.org/10.3390/su15010109 - Miah, M. J., Ali, M. K., Paul, S. C., John Babafemi, A., Kong, S. Y., & Šavija, B. (2020). Effect of Recycled Iron Powder as Fine Aggregate on the Mechanical, Durability, and High Temperature Behavior of Mortars. Materials, 13(5), 1168.
https://doi.org/10.3390/ma13051168 - Miah, M., Miah, M., Paul, S., Ying, K., Babafemi, A. J., Ali, M., & Patoary, Md. M. (2022). Waste iron powder as aggregate and binder in mortar production. Magazine of Civil Engineering, 108.
https://doi.org/10.34910/MCE.108.10 - Moldovan, L., & Gligor, A. (2025). The 18th International Conference Interdisciplinarity in Engineering: Inter-Eng 2024 Conference Proceedings, Volume 1. Springer Nature.
- Moret, A., Ferrer, B., Alexandre, J., Gloria, M., & Real, S. (2015). Experimental Study on Thermal Properties of Structural Lightweight Aggregate Concrete. Third International Conference on Advances in Civil, Structural and Construction Engineering - CSCE 2015, 41–45.
https://doi.org/10.15224/978-1-63248-079-8-56 - Morita, M. (2018). Scanning Electron Microscope Energy Dispersive X-Ray Spectrometry. In The Surface Science Society of Japan (Ed.), Compendium of Surface and Interface Analysis (pp. 557–561). Springer.
https://doi.org/10.1007/978-981-10-6156-1_90 - Nicholas, G. N., & Brinkman, B. M. (2024). Concrete Composition and Its Effects on Properties and Performance. 2024 Systems and Information Engineering Design Symposium (SIEDS), 388–391.
https://doi.org/10.1109/SIEDS61124.2024.10534668 - Ouaazizi, K., Samaouali, A., Kanibou, F., Bakari, R., Arbaoui, A., & Loutfi, H. (2023). THE INFLUENCE OF COMPACTION AND TEMPERATURE ON THE THERMAL PROPERTIES OF COMPOSITE CLAY MATERIALS. JP Journal of Heat and Mass Transfer, 35, 139–151.
https://doi.org/10.17654/0973576323047 - Paglia, C. (2023). Concrete Sustainability: A Future Perspective. AM&P Technical Articles, 181(5), 24–27.
https://doi.org/10.31399/asm.amp.2023-05.p024 - Prałat, K., Ciemnicka, J., Koper, A., Szczypiński, M. M., Łoś, P., Nguyen, V. V., Le, V. S., Rapiejko, C., Ercoli, R., & Buczkowska, K. E. (2022). Determination of the Thermal Parameters of Geopolymers Modified with Iron Powder. Polymers, 14(10), Article 10.
https://doi.org/10.3390/polym14102009 - Sah, M., Kodur, V., Almaadawy, A., & Banerji, S. (2025). Characterizing the thermal properties of polymer concrete at elevated temperatures. Cement and Concrete Composites, 163, 106175.
https://doi.org/10.1016/j.cemconcomp.2025.106175 - Sepman, A., Malhotra, J. S., Wennebro, J., & Wiinikka, H. (2024). Iron as recyclable electrofuel: Effect on particle morphology from multiple combustion-regeneration cycles. Combustion and Flame, 259, 113137.
https://doi.org/10.1016/j.combustflame.2023.113137 - Sharma, R. D., & Singh, N. (2023). Evaluation of strength and absorption behaviour of iron slag and recycled aggregates concrete and its comparative environmental estimation by life cycle assessment. Cleaner Materials, 10, 100210.
https://doi.org/10.1016/j.clema.2023.100210 - Sista, K. S., & Dwarapudi, S. (2018). Iron Powders from Steel Industry by-products. ISIJ International, 58(6), 999–1006.
https://doi.org/10.2355/isijinternational.ISIJINT-2017-722 - Tayeh, B., & Al Saffar, D. (2018). Utilization of Waste Iron Powder as Fine Aggregate in Cement Mortar. Journal of Engineering Research and Technology, 5, 22–27.
- Wijesinghe, K. A. P., Lanarolle, G., Gunasekara, C., Law, D. W., Hidallana-Gamage, H. D., & Wang, L. (2025). Thermal and acoustic performance of solid waste incorporated cement based composites: An analytical review. Archives of Civil and Mechanical Engineering, 25(2), 106.
https://doi.org/10.1007/s43452-025-01160-3 - Yee, S., Janney, D. E., & States), I. N. L. (United. (2008). Background X-ray Spectrum of Radioactive Samples (INL/CON-08-13770). Idaho National Laboratory (United States).
https://inis.iaea.org/records/hkn84-xj019 - Zhang, Z. J. (2014). Research on the History and Compositions of Concrete. Advanced Materials Research, 988, 207–210.
https://doi.org/10.4028/www.scientific.net/AMR.988.207
DOI: https://doi.org/10.2478/cee-2026-0095 | Journal eISSN: 2199-6512 (formerly 1336-5835) | Journal ISSN: 1336-5835
Language: English
Submitted on: Dec 16, 2025
Accepted on: Feb 22, 2026
Published on: Feb 23, 2026
Published by: University of Žilina
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2026 Fatima Kanibou, Abderrahim Samaouali, Karima Ouaazizi, Randa Bakari, Asmae Arbaoui, published by University of Žilina
This work is licensed under the Creative Commons Attribution 4.0 License.