Autogenous shrinkage reduction in concrete using eco-efficient hybrid internal curing (WAPB and LWA)
By: Saba Al-Shammari and Ikram Al-Mulla
References
- Abbas, S.M., & Abbas, Z.K. (2022), “The use of lightweight aggregate in concrete: a review”, Journal of Engineering, 28(11), 1–13.
https://doi.org/10.31026/j.eng.2022.11.01 . - ABD-AL-GHAFOOR, L. M., & Harba, I. S. (2024). Behavior of Lightweight Aggregate Wide Reinforced Concrete Beams with Shear Steel Plates Under Repeated Loading. Civil and Environmental Engineering, 20(1), 555–570. 10.2478/cee-2024-0042
- Ahmed, I.F. (2017), “Compressive strength of concrete containing water absorption polymer balls (WAPB)”, Kufa Journal of Engineering, 8(2), 42–52.
https://doi.org/10.30572/2018/kje/821164 . - Al-Mulla, I. F. A., Al-Rihimy, A. S., & Al-Shamaa, M. F. (2020). Compressive strength and shrinkage behavior of concrete produced from Portland limestone cement with water absorption polymer balls. Key Engineering Materials, 857, 83–88.
https://doi.org/10.4028/www.scientific.net/KEM.857.83 - Al-Rhimy A. S. “Experimental Evaluation and Modelling of Time-Dependent Deformations of Self-Compacting Concrete”, Ph.D. Thesis, University of Technology, Civil Engineering Department, 2018, pp. 184.
- Al-Saad, A. (2013), “Effect of internal curing on behavior of high-performance concrete”, MSc thesis, University of Technology, Baghdad. p. 116.
- ACI Committee 211.1. (2009). Standard practice for selecting proportions for normal, heavyweight, and mass concrete. ACI.
- ACI 211.2-98 (Reapproved 2004). Standard Practice for Selecting Proportions for Structural Lightweight Concrete. American Concrete Institute (ACI), Farmington Hills, MI, USA.
- ASTM C494/C494M. (2019). Standard specification for chemical admixtures for concrete. ASTM International.
- ASTM C642. (2013). Standard test method for density, absorption, and voids in hardened concrete. ASTM International.
- Bentz, D. P. (2007). Internal curing of high-performance blended cement mortars. Materials Journal, 104(4), 408–414.
- Bentz, D.P., & Weiss, W.J. (2011), “Internal curing: a 2010 state-of-the-art review”, National Institute of Standards and Technology.
https://doi.org/10.6028/nist.ir.7765 . - Castro, J., Keiser, L., Golias, M., & Weiss, J. (2011). Absorption and desorption properties of fine lightweight aggregate for application to internally cured concrete mixtures. Cement and Concrete composites, 33(10), 1001–1008,
https://doi.org/10.1016/j.cemconcomp.2011.07.006 - Danish, A. and Mosaberpanah, M.A. (2022), “The potential of unperforated cenosphere as an internal curing agent in fly ash-cement mortar”, Advances in Concrete Construction, 14(4), 241–251,
https://doi.org/10.12989/acc.2022.14.4.241 . - EN 12390-4. (2000). Testing hardened concrete – Part 4: Compressive strength – Specification for testing machines. British Standard Specification.
- Fawzi, N.M., & Al-Awadi, A.Y.E. (2017), “Enhancing performance of self-compacting concrete with internal curing using thermostone chips”, Journal of Engineering, 23(7), 1–13.
https://doi.org/10.31026/j.eng.2017.07.01 . - Gawad, M. A., & Fawzi, N. M. (2021, November). Use of thermostone waste aggregates for internal curing of reactive powder concrete. In IOP Conference Series: Earth and Environmental Science (Vol. 877, No. 1, p. 012043). DOI 10.1088/1755-1315/877/1/012043
- Hachim, Q.J-A., & Fawzi, N.M. (2012), “The effect of different types of aggregate and additives on the properties of self-compacting lightweight concrete”, Journal of Engineering, 18(8), 875–888.
https://doi.org/10.31026/j.eng.2012.08.02 . - Ikram F. and Ammar S. “Volumetric Change of Concrete Containing Water Absorption Polymer Balls, International Journal of Science and Research (IJSR), 6(9), 2017. DOI: 10.21275/ART20176503.
- Iraqi Standard Specification No. 5. (2019). Portland Cement Specialities. Central Organization for Standardization and Quality Control, Baghdad, Iraq.
- Iraqi Standard Specification No. 45. (1984). Aggregate from natural sources for concrete. Central Organization for Standardization and Quality Control, Baghdad, Iraq.
- Iraqi Standard Specification No. 1703. (2018). Water used for concrete and mortar. Central Organization for Standardization and Quality Control, Baghdad, Iraq.
- Karim, F.R. (2022), “Influence of internal curing with lightweight pumice fine aggregate on the mechanical properties of cement mortars”, Construction, 2(2), 104–113.
https://doi.org/10.15282/construction.v2i2.8744 . - Karim, F.R. (2025), “Influence of pulverized lightweight pumice fine aggregate on the cement mortar’s dry shrinkage”, Journal of Engineering, 31(5), 129–147.
https://doi.org/10.31026/j.eng.2025.05.08 . - Lyu, J., Feng, S., & Zhang, Q. (2024), “Multi-scale characterization of lightweight aggregate and superabsorbent polymers influence on autogenous shrinkage and microstructure of ultra-high-performance concrete”, Construction and Building Materials, 457, 139408.
https://doi.org/10.1016/j.conbuildmat.2024.139408 . - Najaf, E., Orouji, M., Li, L., & Landis, E.N. (2025), “Development of sustainable, low-shrinkage concrete through optimized aggregate gradation, cement reduction, and internal curing”, Materials, 18(10), 2194.
https://doi.org/10.3390/ma18102194 . - Nguyen, H.D., Mai, L. and Nguyen, H.T. (2021), “Combining internal and external curing to improve quality of self-compacting concrete with consideration of climate effects”, Advances in Concrete Construction, 12(2), 85–91,
https://doi.org/10.12989/acc.2021.12.2.085 . - Palma E Silva, A.A., Capuzzo, V.M.S., Silva, E.F.D., Pereira, A.M.B., & Agostinho, L.B. (2025), “Effects of superabsorbent polymers on autogenous shrinkage and microstructure in metakaolin-based cementitious materials”, Case Studies in Construction Materials, 22, e04740.
https://doi.org/10.1016/j.cscm.2025.e04740 - Saud, D. I., & Habra, I. S. (2025). Behavior of Lightweight Reinforced Concrete Concavely-Curved Soffit Beams Strengthened with CFRP. Civil and Environmental Engineering, 28(1), 91–108. 10.2478/cee-2025-0009
- Schlitter, J., Henkensiefken, R., & Castro, J. (2010), “Development of internally cured concrete for increased service life”, Joint Transportation Research Program.
https://doi.org/10.5703/1288284314262 . - Scrivener, K.L., John, V.M., & Gartner, E.M. (2018). Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry. Cement and Concrete Research, 114, 2–26,
https://doi.org/10.1016/j.cemconres.2018.03.015 . - Venkateswarlu, K., Deo, S., & Murmu, M. (2021), “Effect of super absorbent polymer on workability, strength and durability of self-consolidating concrete”, International Journal of Engineering, 34(6), 1118–1123.
- Yahiaoui, W., Kenai, S., Menadi, B. and Kadri, E.H. (2017), “Durability of self-compacted concrete containing slag in hot climate”, Advances in Concrete Construction, 5(3), 271–288,
https://doi.org/10.12989/acc.2017.5.3.271 . - Zhang, J., Han, Y., & Zhang, J. (2016), “Evaluation of shrinkage-induced cracking in concrete with impact of internal curing and water-to-cement ratio”, Journal of Advanced Concrete Technology, 14(7), 324–334.
https://doi.org/10.3151/jact.14.324 . - Zheng, X., Han, M., & Liu, L. (2021), “Effect of superabsorbent polymer on the mechanical performance and microstructure of concrete”, Materials, 14(12), 3232.
DOI: https://doi.org/10.2478/cee-2026-0090 | Journal eISSN: 2199-6512 (formerly 1336-5835) | Journal ISSN: 1336-5835
Language: English
Submitted on: Dec 21, 2025
Accepted on: Jan 30, 2026
Published on: Mar 19, 2026
Published by: University of Žilina
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2026 Saba Al-Shammari, Ikram Al-Mulla, published by University of Žilina
This work is licensed under the Creative Commons Attribution 4.0 License.