References
- Galman I., Jasiński R. (2018). Joints in masonry walls. 6th International Conference on Autoclaved Aerated Concrete. September 4 – 3, University Postam.
- Jasiński R., Galman I. (2020). Testing joints between walls made of AAC masonry units. Buildings 10(4), 1–24, DOI: 10.3390/buildings10040069, p-ISSN: 2075-5309.
- Galman I., Jasiński R. (2018). Tests of joints in AAC masonry walls. Architecture Civil Engineering Environment 11(4), 79–92, DOI: 10.21307/ACEE-2018-056.
- PN-EN 845-3+A1:2016-10 Specification of supplementary products for masonry. Part 3: Steel reinforcement for joint anchors. (In Polish).
- PN-EN 845-1:2003 Specification of supplementary products for masonry. Part 1: Anchors, anchor strips, hangers, and brackets. (In Polish).
- Trześniewski S., Jasiński R., Galman I.: Connector for bonding walls. Registration number: 128153. (In Polish).
- Bekaert Product Technical Catalogue. Distribution in Poland -Habe company. (In Polish).
- PN-EN 772-1:2011E: Methods of testing masonry units. Part 1: Determination of compressive strength. (In Polish).
- PN-EN 1015-11:2001/A1: Methods of testing mortar for masonry. Part 11: Determination of bending and compressive strength of hardened mortar. (In Polish).
- PN-EN 1052-1:2000 Methods of tests for masonry. Part 1: Determination of Compression Strenght. (In Polish).
- Jasiński R., Drobiec Ł.: (2016). Comparison Research of Bed Joints Construction and Bed Joints Reinforcement on Shear Parameters of AAC Masonry Walls. Journal of Civil Engineering and Architecture, 10(12), 1329 – 1343.
- PN-EN 1052-3:2004 Methods of tests for masonry. Part 3: Determination of initial shear strength. (In Polish).
- PN-EN 10002-1:2004 Metals. Tensile testing. Part 1: Method of testing at ambient temperature. (In Polish).