References
- Węglorz, M. (2014). Selected Aspects of Sustainable Civil Engineering in research works of professor Andrzej Ajdukiewicz. Architecture Civil Engineering Environment, 7(1), 41–47.
- Miloševič, P. (2012). Sustainable Eco Planning Strategies in East Europe (Case Study of Belgrade). Architecture Civil Engineering Environment, 5(4), 29–42.
- Heim, D., Mrowiec, A., Prałat, K., and Mucha, M. (2018). Influence of Tylose MH1000 content on gypsum thermal conductivity. J. Mater. Civ. Eng., 30(3), March.
- Arpe, H. J. (1984). Ullmann’s Encyclopedia of Industrial Chemistry. Calcium Sulfate. Vol.A4, Wiley-VCH, Verlag, Germany, 555–584.
- Duggal, S. K., Building Materials, A.A. Balkema Publishers, Rotterdam, 1998.
- Ragsdale, L. A., Raynham, E. A., Building Materials Technology, Edward Arnold, London, 1972.
- Arikan, M., and Sobolev, K. (2002). The optimization of a gypsum-based composite material. Cem. Concr. Res., 32(11), 1725–1728.
- De Sensale, G. M. (2010). Effect of rice – husk ash on durability of cementitious materials. Cem. Concr. Compos., 32, 718–725.
- Kim, S. (2009). Incombustibility, physic-mechanical properties and TVOC emission behavior of the gypsum-rice husk boards for wall and ceiling materials for construction. Ind. Crops. Prod., 29, 381–387.
- Khali, A. A., Tawfik, A., Hegazy, A. A., and El-Shahat, M. F. (2013). Effect of different modes of silica on the physical and mechanical properties of plaster composites. J. Mater. Constr., 63(312), 529–537.
- Maghsoudi, K., and Motahari, S. (2018). Mechanical, thermal, and hydrophobic properties of silica aerogelepoxy composites. J. Appl. Polym. Sci., 135(3), 45706–45714.
- Sletnes, M., Jelle, B. P., and Risholt, B. (2017). Feasibility study of novel integrated aerogel solutions. Energy Procedia, 132, 327–332.
- Chen, J. J., Ng, P. L., Li, L. G., and Kwan, A. K. H. (2017). Production of high-performance concrete by addition of fly ash microsphere and condensed silica fume. Procedia Eng., 172, 165–171.
- Kwan, A. K. H., and Li, Y. (2013). Effects of fly ash microsphere on rheology, adhesiveness and strength of mortar. Constr. Build. Mater., 42, 137-145.
- Kwan, A. K. H., and Chen, J. J. (2013). Adding fly ash microsphere to improve packing density, flowability and strength of cement paste. Powder Technol., 234, 19–25.
- Hewit, G. F., Shires, G. L., and Bott, T. R. (1994). Process heat transfer. CRC Press LCC, New York, 16–18.
- Adrien, J., Meille, S., Tadier, S., Maire, E., and Sasaki, L. (2016). In-situ X-ray tomographic monitoring of gypsum plaster setting. Cem. Concr. Res., 82, 107–116.
- Karni, J., and Karni, E. (1995). Gypsum in construction: Origin and properties. Mater. Struct., 28(2), 92–100.
- Yu, Q. L., and Brouwers, H. J. H. (2012). Thermal properties and microstructure of gypsum board and its dehydration products: A theoretical and experimental investigation. Fire Mater., 36(7), 575–589.
- Carson, J. K., Lovatt, S. J., Tanner, D. J., and Cleland, A. C. (2005). Thermal conductivity bounds for isotropic, porous materials. Int. J. Heat Mass Transfer, 48(11), 2150–2158.
- Martias, C., Joliff, Y., Nait-Ali, B., Rogez, J., and Favotto, C. (2013). A new composite based on gypsum matrix and mineral additives: Hydration process of the matrix and thermal properties at room temperature. Thermochimica Acta, 567, 15–26.
- Gruescu, C., Giraud, A., Homand, F., Kondo, D., and Do, D. P. (2007). Effective thermal conductivity of partially saturated porous rocks. Int. J. Solids Struct., 44(3–4), 811–833.
- Kamseu, E., Bignozzi, M. C., Melo, U. C., Leonelli, C., and Sglavo, V. M. (2013). Design of inorganic polymer cements: Effects of matrix strengthening on microstructure. Constr. Build. Mater., 38, 1135–1145.
- Kamseu, E., Nait-Ali, B., Bignozzi, M. C., Leonelli, C., Rossignol, S., and Smith, D. S. (2012). Bulk composition and microstructure dependence of effective thermal conductivity of porous inorganic polymer cements. J. Eur. Ceram. Soc., 32(8), 1593–1603.
- Ru, W., Xin-Gui, L., and Pei-Ming, W. (2006). Influence of polymer on cement hydration in SBR-modified cement pastes. Cem. Concr. Res., 36(9), 1744–1751.
- Choi, H., and Noguchi, T. (2015). Modeling of mechanical properties of concrete mixed with expansive additive. Int. J. Concr. Struct. Mater., 9(4), 391–399.
- Yan, Y., Yu, Z., and Yingzi, Y. (2012). Incorporation superabsorbent polymer (SAP) particles as controlling pre-existing flaws to improve the performance of engineered cementitious composites (ECC). Constr. Build. Mater., 28(1), 139–145.
- Knapen, E., and Van Gemert, D. (2009). Cement hydration and microstructure formation in the presence of water-soluble polymers. Cem. Concr. Res., 39(1), 6–13.
- Garbalińska, H., and Strzałkowski, J. (2016). Thermal and strength properties of lightweight concretes with the addition of aerogel particles. Adv. Cem. Res., 28(9), 567–575.
- Schiavoni, S., D’Alessandro, F., Bianchi, F., and Astrubali, F. (2016). Insulation materials for the building sector: A review and comparative analysis. Renew. Sust. Energ. Rev., 62, 988–1011.
- Pichór, W. (2009). Properties of fiber reinforced cement composites with cenospheres from coal ash. Proc. Int. Symp. Brittle Matrix Composites 9, Editors: Brandt, A. M., Olek, J., Marshall, I. H., 245–254.
- Baspinar, M. S., and Kahraman, E. (2011). Modifications in the properties of gypsum construction element via addition of expanded macroporous silica granules. Constr. Build. Mater., 25, 3327–3333.
- Hand, R. J. (1997). Calcium sulphate hydrates. Brit. Ceram. Trans., 96(3), 116–120.
- Dudek, E., Mosiadz, M., and Orzepowski, M. (2007). Uncertainties of resistors temperature coefficients. Meas. Sci. Rev., 7(3), 23–26.
- Glinicki, M. A., Jaskulski, R., Pichór, W., Dąbrowski, M., and Sobczak, M. (2015). Investigation of thermal properties of shielding concrete. Proc. Int. Symp. Brittle Matrix Composites 9, Editors: Brandt, A. M., Olek, J., Glinicki, M. A., Leung, C. K. Y., Lis, J., 371–380.
- Kušnerová, M., Valíček, J., Harničárová, M., Hryniewicz, T., Rokosz, K., Palková, Z., Václavík, V., Řepka, M., and Bendová, M. (2013). A proposal for simplifying the method of evaluation of uncertainties in measurement results. Meas. Sci. Rev., 13(1), 1–6.
- Mróz, P., and Mucha, M. (2017). Hydration kinetics of calcium sulphate hemihydrate modified by water soluble polymer. Int. J. Eng. Res. Sci., 3(6), 5–13.