References
- [1] Józwik, J., Mika, D. (2015). Diagnostics of workpiece surface condition based on cutting tool vibrations during machining. Advances in Science and Technology Research Journal, 9 (26), 57-65.
- [2] Glowacz, A., Glowacz, Z. (2016). Diagnostics of stator faults of the single-phase induction motor using thermal images, MoASoS and selected classifiers. Measurement, 93, 86-93.10.1016/j.measurement.2016.07.008
- [3] Fraczyk, A., Kucharski, J. (2017). Surface temperature control of a rotating cylinder heated by moving inductors. Applied Thermal Engineering, 125, 767-779.
- [4] Krolczyk, G.M., Maruda, R.W., Nieslony, P., Wieczorowski, M. (2016). Surface morphology analysis of Duplex Stainless Steel (DSS) in Clean Production using the Power Spectral Density. Measurement, 94, 464-470.10.1016/j.measurement.2016.08.023
- [5] Kočí, V., Maděra, J., Jerman, M., Trník, A., Černý, R. (2014). Determination of the equivalent thermal conductivity of complex material systems with large-scale heterogeneities. International Journal of Thermal Sciences, 86, 365-373.10.1016/j.ijthermalsci.2014.07.020
- [6] Novák, M., Náprstková, N., Józwik, J. (2015). Analysis of the surface profile and its material share during the grinding inconel 718 alloy. Advances in Science and Technology Research Journal, 9 (26), 41-48.
- [7] Wang, W.L., Zhang, H., Du, X.J., Sun, Y.Y. (2016). PCB-integrated thin film thermocouples for transient temperature measurement. Electronics Letters, 52 (13), 1140-1141.
- [8] Mikhalieva, M., Hots, N., Mykyychuk, M., Dzikovska, Y. (2017). Use electric and acoustic technologies for automated control of water. In Advances in Intelligent Systems and Computing: Selected Papers from the International Conference on Computer Science and Information Technologies. Springer, Vol. 512, 293-303.
- [9] Feldshtein, E., Józwik, J., Legutko, J. (2016). The influence of the conditions of emulsion mist formation on the surface roughness of AISI 1045 steel after finish turning. Advances in Science and Technology Research Journal, 10 (30), 144-149.
- [10] Mellal, I., Laghrouche, M., Tien Bui, H. (2017). Field programmable gate array (FPGA) respiratory monitoring system using a flow microsensor and an accelerometer. Measurement Science Review, 17 (2), 61-67.
- [11] Ferrero, A., Scotti, V. (2013). Forensic metrology: A new application field for measurement experts across techniques and ethics. IEEE Instrumentation & Measurement Magazine, 16 (1), 14-17.
- [12] Birch, J. (2003). Benefit of legal metrology for the economy and society. A study for the International Committee of Legal Metrology. https://www.oiml.org/en/files/pdf_e/e002-e03.pdf.
- [13] Webster, J. (1999). Measurement, Instrumentation, and Sensors Handbook. CRC Press.
- [14] Childs, P.R.N., Greenwood, J.R., Long, C.A. (2000). Review of temperature measurement. Review of Scientific Instruments, 71, 2959-2978.
- [15] Kochan, O., Kochan, R., Bojko, O., Chyrka, M. (2007). Temperature measurement system based on thermocouple with controlled temperature field. In 4th IEEE Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS 2007), 6-8 September 2007. IEEE, 47-51.
- [16] Jun, S., Kochan, O., Kochan, V., Wang, C. (2016). Development and investigation of the method for compensating thermoelectric inhomogeneity error. International Journal of Thermophysics, 37 (1).
- [17] Maruda, R.W., Krolczyk, G.M., Nieslony, P., Wojciechowski, S., Michalski, M., Legutko, S. (2016). The influence of the cooling conditions on the cutting tool wear and the chip formation mechanism. Journal of Manufacturing Processes, 24 (1), 107-115.
- [18] Glowacz, A., Glowacz, A., Glowacz, Z. (2015). Recognition of thermal images of direct current motor with application of area perimeter vector and bayes classifier. Measurement Science Review, 15 (3), 119-126.
- [19] Stadnyk, B., Yatsyshyn, S., Skoropad, P. (2012). Research in nanothermometry. Part 4. Amorphous alloys of thermo-resistive thermometry. Sensors and Transducers, 141 (6), 1-7.
- [20] Machin, G., Bojkovski, J., del Campo, D. et al. (2014). A European roadmap for thermometry. International Journal of Thermophysics, 35 (3-4), 385-394.
- [21] Palenčár, R., Sopkuliak, P., Palenčár, J., Ďuriš, S., Suroviak, E., Halaj, M. (2017). Application of Monte Carlo Method for evaluation of uncertainties of ITS-90 by Standard Platinum Resistance Thermometer. Measurement Science Review, 17 (3), 108-116.
- [22] Park, R.M. (1993). Manual on the Use of Thermocouples in Temperature Measurement. ASTM International.
- [23] Smalcerz, A., Przylucki, R. (2013). Impact of electromagnetic field upon temperature measurement of induction heated charges. International Journal of Thermophysics, 34 (4), 667-679.10.1007/s10765-013-1423-1
- [24] Kochan, R., Kochan, O., Chyrka, M., Vasylkiv, N. Precision data acquisition (DAQ) module with remote reprogramming. In IEEE Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS 2005), 5-7 September, 2005. IEEE, 279-282.
- [25] Duan, Q. (2009). Research of a cold end temperature compensation for thermal couple. In IEEE International Conference on Automation and Logistics (ICAL '09), 5-7 August, 2009. IEEE, 921-924.
- [26] Körtvélyessy, L. (1998). Thermoelement Praxis. Essen, Germany: Vulkan-Verlag. (in German).
- [27] Sachenko, A., Kochan, V., Turchenko, V. (2000). Sensor drift prediction using neural networks. In International Workshop on Virtual and Intelligent Measurement Systems (VIMS 2000), 29-30 April, 2000, 88-92.
- [28] Rogelberg, N., Nuzhnov, A., Pokrovskaya, G. et al. (1969). The stability of the chromel-alumel thermocouples’ thermoelectric power at temperatures up to 1200°C. Investigation of alloys for thermocouples. In Proceedings of the Giprotsvetmetobrabotka.
- [29] Sloneker, K.C. (2009). Thermocouple inhomogeneity. Ceramic Industry, 159 (4), 13-18.
- [30] Vasylkiv, N., Kochan, O., Kochan, R., Chyrka, M. (2009). The control system of the profile of temperature field. In IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS 2009), 21-23 September, 2009. IEEE, 201-206.
- [31] Jun, S., Kochan, O., Kochan, R. (2016). Thermocouples with built-in self-testing. International Journal of Thermophysics, 37 (4).
- [32] Woolley, J.W., Woodbury, K.A. (2009). Using computational models to account for thermocouple conduction error in cast metal/mold interfacial heat transfer experiments. In 113th Metalcasting Congress, 7-10 April 2009, Vol. 117, 31-40.
- [33] Shu, C., Kochan, O. (2013). Method of thermocouples self verification on operation place. Sensors & Transducers, 160 (12), 55-61.
- [34] Vasylkiv, N. (2010). Improvement of metrology software test in computer systems of temperature measurement. International Journal of Computing, 9 (2), 175-182.
- [35] Jun, S., Kochan, O., Levkiv, M. (2017). Metrological software test for studying the method of thermocouple error determination during operation. In 11th International Conference on Measurement (Measurement 2017), 29-31 May, 2017. Bratislava, Slovakia: Institute of Measurement Science SAS, 171-174.
- [36] International Organization for Standardization. (2010). Guide to the Expression of Uncertainty in Measurement (GUM).
- [37] Informa USA, Inc. Electronic Design. http://www.electronicdesign.com/analog/when-1-1-3-db-averaging-adc-channels-improve-nsd.