Skip to main content
Have a personal or library account? Click to login
Examination of the Average Chipping Rate on the Edges of Milled Granite Surfaces Cover

Examination of the Average Chipping Rate on the Edges of Milled Granite Surfaces

Measurement Science Review
Volume 15 (2015): Issue 1 (February 2015)
By:  and    
Open Access
|Mar 2015
References

References

  1. [1] Gogotsi, G., Mudrik, S., Galenko, V. (2007). Evaluation of fracture resistance of ceramics: Edge fracture tests., 33, 315-320.
    Open DOISearch in Google Scholar
  2. [2] Gogotsi, G. (2014). Classification of ceramics and glass (edge chipping and fracture toughness)., 40, 5591-5596.
    Open DOISearch in Google Scholar
  3. [3] Li, Z.C., Cai, L.W., Pei, Z.J. (2006) Treadwell C. Edge-chipping reduction in rotary ultrasonic machining of ceramics: Finite element analysis and experimental verification., 46, 1469-1477.
    Open DOISearch in Google Scholar
  4. [4] Petit, F., Vandeneede, V., Cambier, F. (2009). Ceramic toughness assessment through edge chipping measurements – Influence of interfacial friction., 29, 2135-2141.
    Open DOISearch in Google Scholar
  5. [5] Yang, B., Shen, X., Lei, S. (2009). Mechanisms of edge chipping in laser-assisted milling of silicon nitride ceramics., 49, 344-350.
    Open DOISearch in Google Scholar
  6. [6] Mohajerani, A., Spelt, J.K. (2011) Edge chipping of borosilicate glass by low velocity impact of spherical indenters., 43, 671-683.
    Open DOISearch in Google Scholar
  7. [7] Mohajerani, A., Spelt, J.K. (2010) Edge chipping of borosilicate glass by blunt indentation., 42, 1064-1080.
    Open DOISearch in Google Scholar
  8. [8] Chai, H., Lawn, B.R. (2007). A universal relation for edge chipping from sharp contacts in brittle materials: A simple means of toughness evaluation., 55, 2555-2561.
    Open DOISearch in Google Scholar
  9. [9] Scieszka, S.F. (2005). Edge failure as a means of concurrently estimating the abrasion and edge fracture resistance of hard-metals., 38, 834-842.
    Open DOISearch in Google Scholar
  10. [10] Bao, R.H., Zhang, L.C., Yao, Q.Y., Lunn, J. (2011). Estimating the peak indentation force of the edge chipping of rocks using single point-attack pick., 339-347.
    Open DOISearch in Google Scholar
  11. [11] Zhang, Z.X., Kou, S.Q., Yu, J., Yu, Y., Jiang, L.G., Lindqvist, P.A. (1999). Effects of loading rate on rock fracture., 36, 597-611.
    Open DOISearch in Google Scholar
  12. [12] Zhang, Z.X., Kou, S.Q., Jiang, L.G., Lindqvist, P.A. (2000). Effects of loading rate on rock fracture: Fracture characteristics and energy partitioning., 37, 745-762.
    Open DOISearch in Google Scholar
  13. [13] Kato, Y., Ohmri, K., Hatano, E., Takazawa, K. (2007). The standartization of edge quality of the precise machinings products., 24-25, 83-90.
    Open DOISearch in Google Scholar
  14. [14] Harnicarova, M., Valicek, J., Kusnerova, M., Grznárik, R., Petru, J., Cepova, L. (2012). A new method for the prediction of laser cut surface topography., 12, 195-204.
    Open DOISearch in Google Scholar
  15. [15] Kuhinek, D., Zoric, I., Hrzenjak, P. (2011). Development of virtual instrument for uniaxial compression testing of rock samples., 11, 99-103.
    Open DOISearch in Google Scholar
  16. [16] Kuhinek, D., Zoric, I., Hrzenjak, P. (2011). Measurement uncertainly in testing of uniaxial compressive strength and deformability of rock samples., 11, 112-117.
    Search in Google Scholar
  17. [17] Gyurika, I.G. (2013). Experimental protocols to define quality metrics for milled edges in granite. In, September 10-12, 2013. Faculty of Engineering University of Rijeka, 57-60.
    Search in Google Scholar
  18. [18] Gálos, M., Gyurika, I.G. (2014). Quality measuring numbers of milled edges of granite surfaces., 58, 121-129.
    Open DOISearch in Google Scholar
DOI: https://doi.org/10.1515/msr-2015-0001 | Journal eISSN: 1335-8871
Journal RSS Feed
Language: English
Page range: 1 - 8
Submitted on: Sep 4, 2014
Accepted on: Jan 24, 2015
Published on: Mar 11, 2015
Published by: Slovak Academy of Sciences, Institute of Measurement Science
In partnership with: Paradigm Publishing Services
Publication frequency: Volume open
Keywords:
Granite,
qualification,
quantitative marker,
edge chippings,
milling
Related subjects:
Engineering,
Electrical engineering,
Control engineering, metrology and testing

© 2015 István Gábor Gyurika, Tibor Szalay, published by Slovak Academy of Sciences, Institute of Measurement Science
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 15 (2015): Issue 1 (February 2015)
Next article