Have a personal or library account? Click to login
InP nanowires quality control using SEM and Raman spectroscopy Cover

InP nanowires quality control using SEM and Raman spectroscopy

Open Access
|Nov 2016

Abstract

Three different types of samples of InP nanowires, i.e. undoped, doped with Si and doped with Te, were grown and measured using SEM and Raman spectroscopy. Scanning Electron Microscope (SEM) images showed differences in the length, homogeneity and curvature of the nanowires. The most homogenous wires, grown most perpendicular to the surface, were those Si doped. They were also the shortest. Raman spectroscopy showed that the nanowires doped with Si had the lowest Full Width at Half Maximum (FWHM) TO band, which suggests the highest crystal quality of these wires. For the wires doped with Te, which were the most inhomogeneous, a low energy acoustic band was also observed, which suggests the lowest crystal quality of these structures.

DOI: https://doi.org/10.1515/msp-2016-0116 | Journal eISSN: 2083-134X | Journal ISSN: 2083-1331
Language: English
Page range: 851 - 855
Submitted on: Apr 19, 2016
Accepted on: Oct 13, 2016
Published on: Nov 27, 2016
Published by: Wroclaw University of Science and Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year

© 2016 K. Grodecki, E. Dumiszewska, M. Romaniec, W. Strupinski, published by Wroclaw University of Science and Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.