Design and Development of Vacuum-Actuated Soft Gripper for Pick and Place Different Irregular Shaped Objects
Abstract
This article presents the design, fabrication and testing of a novel vacuum-based soft robotic gripper. This work included the fabrication of a cylindrical gripper via a 3D-printed mold, into which a combination of liquid silicone elastomer and curing agent was injected. The deformation behavior of the soft gripper was analyzed for different pressures using the ANSYS software. The ANSYS results revealed that the pressure, material and size of the cavity inside the gripper are the most important factor affecting the deformation of the soft gripper. Finally, the grasping power and holding time of the fabricated gripper was tested by grasping different objects, including fruits, mobile phones, plastic bottles and stainless-steel utensils. The validation findings demonstrate the gripping and holding capabilities of the proposed vacuum gripper, suggesting its suitability for various automation and industrial applications.
© 2026 S. Senthil Raja, R. Gangadevi, M. Dharmaraj, published by Łukasiewicz Research Network – Industrial Research Institute for Automation and Measurements PIAP
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.
