A Custom Robotic Vehicle Prototype for Disinfecting Workplaces
References
- Y. Cao, J. Cao, and Y. Song, “Practical Prescribed Time Control of Euler–Lagrange Systems With Partial/Full State Constraints: A Settling Time Regulator-Based Approach,” IEEE Transactions on Cybernetics, vol. 52, no. 12, 2021. pp. 13096–13105.
- L. Lin, P. Wu, Y. Chen, and B. He, “Enhancing the Settling Time Estimation of Fixed-time Stability and Applying It to the Predefined-time Synchronization of Delayed Memristive Neural Networks with External Unknown Disturbance,” Chaos: An Interdisciplinary Journal of Nonlinear Science, vol. 30, no. 8, 2020, p. 083110.
- C.A. Ramos-Paja, D. González, and A.J. Saavedra-Montes, “Accurate Calculation of Settling Time in Second Order Systems: A Photovoltaic Application,” Revista Facultad de Ingeniería Universidad de Antioquia, no. 66, 2013, pp. 104–117.
- H.K. Schoenwetter, “High-accuracy Settling Time Measurements,” IEEE Transactions on Instrumentation and Measurement, vol. 32, no. 1, 1983, pp. 22–27.
- Y. Gao, C. Li, and D. Li, “Command Filter-based Control for Spacecraft Attitude Tracking with Pre-defined Maximum Settling Time Guaranteed,” IEEE Access, vol. 9, 2021, pp. 69663–69679.
- S.J. Dodds, “Settling Time Formulae for the Design of Control Systems with Linear Closed Loop Dynamics,” Proceedings of Advances in Computing and Technology, 2008, pp. 31–39.
- X. Li, D.W. Ho, and J. Cao, “Finite-time Stability and Settling-time Estimation of Nonlinear Impulsive Systems,” Automatica, vol. 99, 2019, pp. 361–368.
- Y. Hong, J. Wang, and Z. Xi, “Stabilization of Uncertain Chained Form Systems within Finite Settling Time,” IEEE Transactions on Automatic Control, vol. 50, no. 9, 2005, pp. 1379–1384.
- A. Soltani Sharif Abadi, P. Heidarpoor Dehkordi, R. Hajiyan, R. Kowalik, and W. Wróblewski, “Design and Real-time Evaluation of a Novel Observer-based Predefined-Time Controller for the Industrial Processes,” ISA Transactions, vol. 156, 2025, pp. 551–564.
- Y. Nishikawa, N. Sannomiya, T. Ohta, and H. Tanaka, “A Method for Auto-tuning of PID Control Parameters,” Automatica, vol. 20, no. 3, 1984, pp. 321–332.
- Y. Mitsukura, T. Yamamoto, and M. Kaneda, “A Genetic Tuning Algorithm of PID Parameters,” 1997 IEEE International Conference on Systems, Man, and Cybernetics. Computational Cybernetics and Simulation, vol. 1, 1997, pp. 923–928.
- J.-X. Xu, D. Huang, and S. Pindi, “Optimal Tuning of PID Parameters Using Iterative Learning Approach,” SICE Journal of Control, Measurement, and System Integration, vol. 1, no. 2, 2008, pp. 143–154.
- O. Lequin, M. Gevers, M. Mossberg, E. Bosmans, and L. Triest, “Iterative Feedback Tuning of PID Parameters: Comparison with Classical Tuning Rules,” Control Engineering Practice, vol. 11, no. 9, 2003, pp. 1023–1033.
- A. Soltani Sharif Abadi, A. Ordys, K. Kukielka, and B. Pierscionek, “Review on Challenges for Robotic Eye Surgery: Surgical Systems, Technologies, Cost-effectiveness, and Controllers,” The International Journal of Medical Robotics and Computer Assisted Surgery, vol. 19, no. 4, 2023, p. e2524.
- L.M. Pang, H. Ishibuchi, and K. Shang, “Offline Automatic Parameter Tuning of MOEA/D Using Genetic Algorithm,” 2019 IEEE Symposium Series on Computational Intelligence (SSCI), 2019, pp. 1889–1897.
- X. Song, T. Jiang, S. Schlegel, and D. Westermann, “Parameter Tuning for Dynamic Digital Twins in Inverter-dominated Distribution Grid,” IET Renewable Power Generation, vol. 14, no. 5, 2020, pp. 811–821.
- A.S.S. Abadi, A. Ordys, and B. Pierscionek, “Novel Off-line Self-tuning Controller with Guaranteed Stability,” International Journal of Automotive Technology, vol. 24, no. 3, 2023, pp. 851–862.
- J.L. Meza, V. Santibáñez, R. Soto, and M.A. Llama, “Fuzzy Self-tuning PID Semiglobal Regulator for Robot Manipulators,” IEEE Transactions on Industrial Electronics, vol. 59, no. 6, 2011, pp. 2709–2717.
- A.B. Sharkawy, “Genetic Fuzzy Self-tuning PID Controllers for Antilock Braking Systems,” Engineering Applications of Artificial Intelligence, vol. 23, no. 7, 2010, pp. 1041–1052.
- S. Imai and T. Yamamoto, “Design of a Self-Tuning Controller Using Multiple Local Linear Models for Nonlinear Systems,” IEEJ Transactions on Electronics, Information and Systems, vol. 132, no. 6, 2012, pp. 860–865.
- T. Liu, Q.-G. Wang, and H.-P. Huang, “A Tutorial Review on Process Identification from Step or Relay Feedback Test,” Journal of Process Control, vol. 23, no. 10, 2013, pp. 1597–1623.
- S.-K. Kim and C.K. Ahn, “Auto-tuner-based Controller for Quadcopter Attitude Tracking Applications,” IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 66, no. 12, 2019, pp. 2012–2016.
- L. Pekař, R. Matušů, M. Song, L.K. Pavelková, and Q. Gao, “Asymmetric System Model Parameters Identification Framework via Relay Feedback,” IEEE Access, vol. 11, 2023, pp. 82257–82275; doi: 10.1109/ACCESS.2023.3301181.
- O. Miguel-Escrig, J.-A. Romero-Pérez, J. Sánchez-Moreno, and S. Dormido, “Multiple Frequency Response Points Identification through Single Asymmetric Relay Feedback Experiment,” Automatica, vol. 147, 2023, p. 110749.
- Y. Liu, H. Li, R. Lu, Z. Zuo, and X. Li, “An Overview of Finite/fixed-time Control and Its Application in Engineering Systems,” IEEE/CAA Journal of Automatica Sinica, vol. 9, no. 12, 2022, pp. 2106– 2120.
- A. Muralidharan, R. Pedarsani, and P. Varaiya, “Analysis of Fixed-time Control,” Transportation Research Part B: Methodological, vol. 73, 2015, pp. 81–90.
- A.S.S. Abadi, A. Ordys, and B. Pierscionek, “Controlling a Teleoperated Robotic Eye Surgical System under a Communication Channel’s Unknown Time Delay,” 2023 27th International Conference on Methods and Models in Automation and Robotics (MMAR), 2023, pp. 211–215.
- A.S.S. Abadi, “A Novel Control System for Synchronizing Chaotic Systems in the Presence of Communication Channel Time Delay: Case Study of Genesio-Tesi and Coullet Systems,” Nonlinear Analysis: Hybrid Systems, vol. 50, 2023, p. 101408.
- A. Soltani Sharif Abadi, A. Ordys, and B. Pierscionek, “Controlling of Applied Force and Cornea Displacement Estimation in Robotic Corneal Surgery with a Gripper Surgical Instrument,” The International Journal of Medical Robotics and Computer Assisted Surgery, vol. 21, no. 1, 2025, p. e70038.
- A. Soltani Sharif Abadi, A. Ordys, B. Pierscionek, P. Alinaghi Hosseinabadi, R. Kowalik, and Y.I. Abdullah, “Delayed Teleoperated Robotic Eye Surgical System; Controller Design and Real-Time Experiments,” IET Control Theory & Applications, 2025; doi:10.1049/cth2.70003.
- Y. Orlov, “Finite Time Stability and Robust Control Synthesis of Uncertain Switched Systems,” SIAM Journal on Control and Optimization, vol. 43, no. 4, 2004, pp. 1253–1271.
- A. Polyakov, “Nonlinear Feedback Design for Fixed-time Stabilization of Linear Control Systems,” IEEE Transactions on Automatic Control, vol. 57, no. 8, 2011, pp. 2106–2110.
- A.S.S. Abadi, P.A. Hosseinabadi, and S. Mekhilef, “Fuzzy Adaptive Fixed-time Sliding Mode Control with State Observer for a Class of High-order Mismatched Uncertain Systems,” International Journal of Control, Automation and Systems, vol. 18, 2020, pp. 2492–2508.
- J.D. Sánchez-Torres, D. Gómez-Gutiérrez, E. López, and A.G. Loukianov, “A Class of Predefined-time Stable Dynamical Systems,” IMA Journal of Mathematical Control and Information, vol. 35, no. Supplement_1, 2018, pp. i1–i29.
- D.E. Kirk, Optimal Control Theory: An Introduction, Courier Corporation, 2004.
- E.B. Lee and L. Markus, Foundations of Optimal Control Theory, Minnesota Univ Minneapolis Center For Control Sciences, 1967.
- J. Macki and A. Strauss, Introduction to Optimal Control Theory, Springer Science & Business Media, 2012.
- S. Sastry, “Lyapunov Stability Theory,” Nonlinear Systems, Springer, 1999, pp. 182–234.
Language: English
Page range: 25 - 37
Submitted on: Aug 9, 2024
Accepted on: Feb 28, 2025
Published on: Sep 10, 2025
Published by: Łukasiewicz Research Network – Industrial Research Institute for Automation and Measurements PIAP
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2025 Ali Soltani Sharif Abadi, published by Łukasiewicz Research Network – Industrial Research Institute for Automation and Measurements PIAP
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.