Modelling of refuelling through the entire equipment of HRS: use of dynamic mesh to simulate heat and mass transfer during throttling at PCV
References
- Ansys Inc. (2023) Ansys® Fluent 2023 R1 User guide. Available at:
https://ansyshelp.ansys.com/account/secured?returnurl=/Views/Secured/corp/v231/en/flu_ug/flu_ug.html%23flu_ug (Accessed: 7 September 2023). - Apostolou, D. and Xydis, G. (2019) ‘A literature review on hydrogen refuelling stations and infrastructure. Current status and future prospects’, Renewable and Sustainable Energy Reviews, 113, Article 109292. Available at: DOI: 10.1016/j.rser.2019.109292
- Batina, J.T. (1990) ‘Unsteady Euler airfoil solutions using unstructured dynamic meshes’, AIAA Journal, 28(8), pp. 1381–1388. Available at: DOI: 10.2514/3.25229
- Beswick Engineering (2023) The basics of pressure regulators. Available at:
https://www.beswick.com/resources/the-basics-of-pressure-regulators/ (Accessed: 5 September 2023). - Boqvist, E. (2014) Investigation of a swing check valve using CFD – PhD study. Sweden: Linkping University.
- Bourgeois, T. et al. (2018) ‘The temperature evolution in compressed gas filling processes: A review’, International Journal of Hydrogen Energy, 43(4), pp. 2268–2292. Available at: DOI: 10.1016/j.ijhydene.2017.11.068
- Cengel, Y.A. (2004) Introduction to Thermodynamics and Heat Transfer 2nd Edition. McGraw Hill.
- Chen, J. et al. (2019) ‘Modeling a hydrogen pressure regulator in a fuel cell system with Joule–Thomson effect’, International Journal of Hydrogen Energy, 44(2), pp. 1272–1287. Available at: DOI: 10.1016/j.ijhydene.2018.11.020
- Duan, Y. et al. (2019) ‘An assessment of eddy viscosity models on predicting performance parameters of valves’, Nuclear Engineering and Design, 342, pp. 60–77. Available at: DOI: 10.1016/j.nucengdes.2018.11.036
- Ebne-Abbasi, H., Makarov, D. and Molkov, V. (2023) ‘CFD model of refuelling through the entire equipment of a hydrogen refuelling station’, International Journal of Hydrogen Energy, 53(May 2023), pp. 200–207. Available at: DOI: 10.1016/j.ijhydene.2023.12.056
- Elgowainy, A. et al. (2017) ‘Techno-economic and thermodynamic analysis of pre-cooling systems at gaseous hydrogen refueling stations’, International Journal of Hydrogen Energy, 42(49), pp. 29067–29079. Available at: DOI: 10.1016/j.ijhydene.2017.09.087
- Fuel Cell Standards Committee (2018) ‘J2579_201806 Standard for fuel systems in fuel cell and other hydrogen vehicles’, SAE International Technical paper. Available at: DOI: 10.4271/J2579_201806
- Fuel Cell Standards Committee (2020) ‘J2601_202005, Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles, Rev 2020’, SAE International Technical paper, pp. 1–2. Available at: DOI: 10.4271/J2601_202005
- Genovese, M. et al. (2023) ‘Hydrogen refueling process: theory, modeling, and in-force applications’, Energies, 16(6), Article 2890. Available at: DOI: 10.3390/en16062890
- ISO standards (2009) ISO/TS 15869:2009 Gaseous hydrogen and hydrogen blends. Available at:
https://www.iso.org/standard/52871.html (Accessed: 2 April 2023). - Jin, Z. et al. (2018) ‘Parametric study on Tesla valve with reverse flow for hydrogen decompression’, International Journal of Hydrogen Energy, 43(18), pp. 8888–8896. Available at: DOI: 10.1016/j.ijhydene.2018.03.014
- Johnson, T. et al. (2015) ‘Thermal model development and validation for rapid filling of high pressure hydrogen tanks’, International Journal of Hydrogen Energy, 40(31), pp. 9803–9814. Available at: DOI: 10.1016/j.ijhydene.2015.05.157
- Joule, J.P. (1843) ‘On the calorific effects of magneto-electricity, and on the mechanical value of heat’, The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, 23(152), pp. 263–276. Available at: DOI: 10.1080/14786444308644730
- Joule, J.P. and Thomson, W. (1852) ‘LXXVI. On the thermal effects experienced by air in rushing through small apertures’, The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, 4(28), pp. 481–492. Available at: DOI: 10.1080/14786445208647169
- Kim, N.S. and Jeong, Y.H. (2021) ‘An investigation of pressure build-up effects due to check valve’s closing characteristics using dynamic mesh techniques of CFD’, Annals of Nuclear Energy, 152, Article 107996. Available at: DOI: 10.1016/j.anucene.2020.107996
- Kim, Y., Shin, D. and Kim, C. (2019) ‘On-board cold thermal energy storage system for hydrogen fueling process’, Energies, 12(3), Article 561. Available at: DOI: 10.3390/en12030561
- Kuroki, T. et al. (2021) ‘Thermodynamic modeling of hydrogen fueling process from high-pressure storage tank to vehicle tank’, International Journal of Hydrogen Energy, 46(42), pp. 22004–22017. Available at: DOI: 10.1016/j.ijhydene.2021.04.037
- Landau, L.D. and Lifshitz, E.M. (1987) Fluid Mechanics. 2nd edn, Developments in Geotechnical Engineering. Pergamon Press.
- Launder, B.E. and Spalding, D.B. (1974) ‘The numerical computation of turbulent flows’, Computer Methods in Applied Mechanics and Engineering, 3(2), pp. 269–289. Available at: DOI: 10.1016/0045-7825(74)90029-2
- Lemmon, E.W. et al. (2018) ‘NIST standard reference database 23: reference fluid thermodynamic and transport properties-REFPROP, version 10.0, national institute of standards and technology, standard reference data program, Gaithersburg’. Available at: DOI: 10.18434/T4/1502528
- Li, J.Q. et al. (2023) ‘A study on the Joule-Thomson effect of during filling hydrogen in high pressure tank’, Case Studies in Thermal Engineering, 41(October 2022), Article 102678. Available at: DOI: 10.1016/j.csite.2022.102678
- Mathison, S. et al. (2015) ‘Field validation of the MC default fill hydrogen fueling protocol’, SAE International Journal of Alternative Powertrains, 4(1), Article 2015-01-1177. Available at: DOI: 10.4271/2015-01-1177
- Maximator Gmbh (2023) Maximator Air actuated H2 Valve. Available at:
http://www.maximator.de/assets/mime/05329f9493b1bdb5cb496ff523e61b45/B.01.07.02-Air-actuated-H2-valve.pdf (Accessed: 2 September 2023). - Maytal, B.-Z. and Pfotenhauer, J.M. (2013) Miniature Joule-Thomson cryocooling: principles and practice. Berlin/Heidelberg, Germany: Springer.
- Molkov, V. (2012) Fundamentals of hydrogen safety engineering. Bookboon.
- Molkov, V., Ebne-Abbasi, H. and Makarov, D. (2023) ‘CFD model of refuelling through the entire HRS equipment: the start-up phase simulations’, Hydrogen, 4(3), pp. 585–598. Available at: DOI: 10.3390/hydrogen4030038
- Pakravesh, A. and Zarei, H. (2021) ‘Prediction of Joule–Thomson coefficients and inversion curves of natural gas by various equations of state’, Cryogenics, 118, Article 103350. Available at: DOI: 10.1016/j.cryogenics.2021.103350
- Pamula, H. and Loo, W. (2024) Segment Area Calculator. Available at:
https://www.omnicalculator.com/math/segment-area (Accessed: 10 January 2024). - PRHYDE – Deliverable 6.7 (2022) Results as Input for Standardisation. Available at:
https://lbst.de/wp-content/uploads/2022/12/PRHYDE_Deliverable_D6-7_Results_as_Input_for_Standardisation_V1_final_Dec_2022.pdf (Accessed: 1 July 2023). - Rothuizen, E., Elmegaard, B. and Rokni, M. (2020) ‘Dynamic simulation of the effect of vehicle-side pressure loss of hydrogen fueling process’, International Journal of Hydrogen Energy, 45(15), pp. 9025–9038. Available at: DOI: 10.1016/j.ijhydene.2020.01.071
- Sakamoto, J. et al. (2016) ‘Leakage-type-based analysis of accidents involving hydrogen fueling stations in Japan and USA’, International Journal of Hydrogen Energy, 41(46), pp. 21564–21570. Available at: DOI: 10.1016/j.ijhydene.2016.08.060
- Simonovski, I. et al. (2015) ‘Thermal simulations of a hydrogen storage tank during fast filling’, International Journal of Hydrogen Energy, 40(36), pp. 12560–12571. Available at: DOI: 10.1016/j.ijhydene.2015.06.114
- Turesson, M. (2011) Dynamic simulation of check valve using CFD and evaluation of check valve model in RELAP5. Sweden: Chalmers University of Technology.
- United Nations Economic Commission for Europe (2023) Addendum 13: UN Global Technical Regulation No. 13 (Hydrogen and fuel cell vehicles), Amendment 1, Global Registry Geneva Switzerland. Available at:
https://unece.org/sites/default/files/2023-07/ECE-TRANS-180-Add.13-Amend1e.pdf (Accessed: 4 January 2024). - Wang, X. et al. (2023) ‘Review of researches on important components of hydrogen supply systems and rapid hydrogen refueling processes’, International Journal of Hydrogen Energy, 48(5), pp. 1904–1929. Available at: DOI: 10.1016/j.ijhydene.2022.09.303
- Weatherill, N.P. (1992) ‘Delaunay triangulation in computational fluid dynamics’, Computers and Mathematics with Applications, 24(5–6), pp. 129–150. Available at: DOI: 10.1016/0898-1221(92)90045-J
- Wen, Q. et al. (2022) ‘Numerical simulation and experimental validation of flow characteristics for a butterfly check valve in small modular reactor’, Nuclear Engineering and Design, 391(May 2021), Article 111732. Available at: DOI: 10.1016/j.nucengdes.2022.111732
- Ye, J. et al. (2022) ‘Study on the high-pressure hydrogen gas flow characteristics of the needle valve with different spool shapes’, International Journal of Hydrogen Energy, 48(30), pp. 11370–11381. Available at: DOI: 10.1016/j.ijhydene.2022.04.073
- Zheng, J. et al. (2012) ‘Development of high pressure gaseous hydrogen storage technologies’, International Journal of Hydrogen Energy, 37(1), pp. 1048–1057. Available at: DOI: 10.1016/j.ijhydene.2011.02.125
Language: English
Page range: 12 - 32
Submitted on: Jun 19, 2024
Accepted on: Sep 5, 2024
Published on: Sep 23, 2024
Published by: KIT Scientific Publishing
In partnership with: Paradigm Publishing Services
Keywords:
© 2024 Hazhir Ebne-Abbasi, Dmitriy Makarov, Vladimir Molkov, published by KIT Scientific Publishing
This work is licensed under the Creative Commons Attribution 4.0 License.