Verification of predictive models for the fatigue life of alloys based on nickel, titanium, aluminium and cast irons
References
- Arsić, D., Nikolić, R., Arsić, A., Cvetković, D., Bokuvka, O., Mandić, V., 2026. Root cause assessment of welded satellite gear carrier failure in a bucket wheel excavator. Production Engineering Archives, 32(2), 230-240, DOI: 10.30657/pea.2026.32.19
- Atzori, B., Meneghetti, G., Ricotta, M., 2014. Unified material parameters based on full compatibility for low-cycle fatigue characterisation of as-cast and austempered ductile irons. International Journal of Fatigue, 68, 111-122, DOI: 10.1016/j.ijfatigue.2014.05.012
- Belan, J., Hurtalová, L., Vaško, A., Tillová, E., Chalupová, M., 2017. Fatigue Test of the Inconel Alloy 718 Under Three Point Bending Load at Low Frequency. In: Öchsner, A., Altenbach, H. (eds), Properties and Characterization of Modern Materials, Advanced Structured Materials, 33, Springer, Singapore, DOI: 10.1007/978-981-10-1602-8_7
- Belan, J., Kuchariková, L., Tillová, E., Chalupová, M., 2019. Three-Point Bending Fatigue Test of Ti6Al4V Titanium Alloy at Room Temperature. Advances in Materials Science and Engineering, 2842416, DOI: 10.1155/2019/2842416
- Belan, J., Vaško, A., Uhríčik, M., Matvija, M., 2025. Fatigue crack initiation and failure analysis of IN718 alloy after push–pull loading at room temperature and at 700 °C. Engineering Failure Analysis, 167, Part A, DOI: 10.1016/j.engfailanal.2024.108977
- Carrion, P.E., Shamsaei, N., Daniewicz, S.R., Moser, R.D., 2017. Fatigue behavior of Ti-6Al-4V ELI including mean stress effects. International Journal of Fatigue, 99, Part 1, 87-100, DOI: 10.1016/j.ijfatigue. 2017.02.013
- Dowling, N.E., 2018. Mechanical Behavior of Materials: Engineering Methods for Deformation, Fracture, and Fatigue, fifth ed., Pearson.
- Duga, J.J., Fisher, W.H., Buxbaum, R.W., Rosenfield, A.R., Buhr, A.R., Honton, E.J., McMillan, S.C., 1983. The Economic Effects of Fracture in the United States: Part 2, Special Publication No. 647-2, U.S. Department of Commerce, National Bureau of Standards, U.S. Government Printing Office, Washington, DC.
- Gan, L., Wu, H., Zhong, Z., 2022. Fatigue life prediction considering mean stress effect based on random forests and kernel extreme learning machine. International Journal of Fatigue, 158, 106761, DOI: 10.1016/j.ijfatigue.2022.106761
- Htoo, A.T., Miyashita, Y., Otsuka, Y., Mutoh, Y., Sakurai, S., 2017. Notch fatigue behavior of Ti-6Al-4V alloy in transition region between low and high cycle fatigue. International Journal of Fatigue, 95, 194-203, DOI: 10.1016/j.ijfatigue.2016.10.024
- Hurtalová, L., Tillová, E., Chalupová, M., Belan, J., Uhríčik, M., 2016. The Influence of Two Different Casting Moulds on the Fatigue Properties of the Al–Si–Cu Cast Alloy. In: Öchsner, A., Altenbach, H. (eds), Machining, Joining and Modifications of Advanced Materials, Advanced Structured Materials, 61, Springer, Singapore, DOI: 10.1007/978-981-10-1082-8_6
- Kim, K.S., Chen, X., Han, C., Lee, H.W., 2002. Estimation methods for fatigue properties of steels under axial and torsional loading. International Journal of Fatigue, 24(7), 783-793, DOI: 10.1016/S0142-1123(01)00190-6
- Lavenstein, S., El-Awady, J.A., 2019. Micro-scale fatigue mechanisms in metals: Insights gained from small-scale experiments and discrete dislocation dynamics simulations. Current Opinion in Solid State and Materials Science, 23(5), 100765, DOI: 10.1016/j.cossms.2019.07.004
- Lee, K.-O., Lee, S.-B., 2016. A comparison of methods for predicting the fatigue life of gray cast iron at elevated temperatures. Fatigue Fract Engng Mater Struct, 39, 439-452, DOI: 10.1111/ffe.12368
- Li, J., Lu, Z.-Y., Li, H., Ma, J., Wriggers, P., 2026. Equivalent strain-based fatigue life prediction model for multiaxial loading in diverse metallic materials. International Journal of Fatigue, 209, 109599, DOI: 10.1016/j.ijfatigue.2026.109599
- Lipiński, T., Wach, A., 2020. Influence of inclusions on bending fatigue strength coefficient the medium carbon steel melted in an electric furnace. Production Engineering Archives, 26(3), 88-91, DOI: 10.30657/pea.2020.26.18
- Liu, M., Zou, T., Wang, Q., Jiang, Y., Wu, H., Pei, Y., Zhang, H., Liu, Y., Wang, Q., 2024. Microstructure evolution, failure mechanism and life prediction of additively manufactured Inconel 625 superalloy with comparable low cycle fatigue performance. International Journal of Fatigue, 181, 108142, DOI: 10.1016/j.ijfatigue.2023.108142
- Milne, I., 1994. The importance of the management of structural integrity. Engineering Failure Analysis, 1(3), 171-181, DOI: 10.1016/1350-6307(94)90016-7
- Mohammed, M.M., 2024. Fundamental Drivers of Metal Fatigue Failure and Performance. Multidisciplinary Materials Chronicles, 1(1), 49-61, DOI: 10.62184/mmc.jmmc110020245
- Morrow, J., 1968. Fatigue Properties of Metals. In: Fatigue Design Handbook, Society of Automotive Engineers, Warrendale, Publication No. AE-4, Section 3.2, 1-132.
- Pineau, A., Bathias, C., 2013. Fatigue of Materials and Structures: Fundamentals, first ed., Wiley-ISTE, DOI: 10.1002/9781118623435.ch1
- Reed, R.P., Smith, J.H., Christ, B.W., 1983. The Economic Effects of Fracture in the United States: Part 1, Special Publication No. 647-1, U.S. Department of Commerce, National Bureau of Standards, U.S. Government Printing Office, Washington, DC.
- Ricotta, M., 2015. Simple expressions to estimate the Manson–Coffin curves of ductile cast irons. International Journal of Fatigue, 78, 38-45, DOI: 10.1016/j.ijfatigue.2015.03.025
- Salvati, E., 2024. Evaluating fatigue onset in metallic materials: Problem, current focus and future perspectives. International Journal of Fatigue, 188, 108487, DOI: 10.1016/j.ijfatigue.2024.108487
- Schijve, J., 2009. Fatigue of Structures and Materials, second ed., Springer, Dordrecht, DOI: 10.1007/978-1-4020-6808-9
- Suresh, S., 1998. Fatigue of Materials, second ed., Cambridge University Press, Cambridge.
- Ulewicz, R., Tomski, P., 2017. The effect of high-frequencies loading on the fatigue cracking of nodular cast iron. Metalurgija, 56(1-2), 33-36.
- Vaško, A., Belan, J., Kuchariková, L., 2017. Comparison of low and high frequency fatigue tests. Production Engineering Archives, 17(17), 14-17, DOI: 10.30657/pea.2017.17.03
- Vaško, A., 2020. Comparison of mechanical and fatigue properties of SiMo- and SiCu-types of nodular cast iron. Materials Today: Proceedings, 32(2), 168-173, DOI: 10.1016/j.matpr.2020.04.184
- Vaško, A., Uhríčik, M., Kaňa, V., 2023. Fatigue Resistance and Other Utility Properties of NiMn-Type of Austenitic Nodular Cast Iron. Archives of Metallurgy and Materials, 68(2), 563-569, DOI: 10.24425/amm. 2023.142435
- Wang, G., Che, X., Zhang, Z., Zhang, H., Zhang, S., Li, Z., Sun, J., 2020. Micro-structure and Low-Cycle Fatigue Behavior of Al-9Si-4Cu-0.4Mg-0.3Sc Alloy with Different Casting States. Materials, 13(3), 638, DOI: 10.3390/ma13030638
- Zhu, S.-P., Lei, Q., Huang, H.-Z., Yang, Y.-J., Peng, W., 2017. Mean stress effect correction in strain energy-based fatigue life prediction of metals. International Journal of Damage Mechanics, 26(8), 1219-1241, DOI: 10.1177/1056789516651920
Language: English
Page range: 540 - 550
Submitted on: May 20, 2026
Accepted on: Aug 25, 2026
Published online: Oct 25, 2026
Published in print: Dec 1, 2026
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2026 Juraj Belan, Lenka Kuchariková, Edita Illichmanová, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution 4.0 License.