FEM Approach to Estimate the Behaviour of Biocomposite Metal-Surface Coating Systems

S. Sobieszczyk; W. Wojnicz; B. Nowak

doi:10.2478/v10077-008-0020-7

.blurhash-client-img { display: none !important; }

FEM Approach to Estimate the Behaviour of Biocomposite Metal-Surface Coating Systems

Advances in Materials Science

Volume 8 (2008): Issue 1 (March 2008)

By: S. Sobieszczyk, W. Wojnicz and B. Nowak

Open Access

|Sep 2008

Abstract

A three dimensional (3D) model of biocomposite metal-surface coating system, which is influenced by known external forces, is proposed. This model consists of the metallic substrate (Ti6A14V) and the hydroxyapatite (HA) coating. Using FEM (finite element method), strain-stress maps of model were generated for investigating relations between the extreme stress of HA coating and the magnitude of external force and the thickness of the coating. The analysis of numerical simulations results confirms that the system with the greatest coating thickness (i.e. 10^-3 m) has the least extreme stress in this surface coating.

References

Liu X., Poon R. W. Y., Kwok S. C. H., Chu P. K., Ding Ch.: Plasma surface modification of titanium for hard tissue replacements.186 (2004) 227-233.
Search in Google Scholar
Windler M., Klabunde R.: Titanium for hip and knee prostheses. [In] Titanium in Medicine, D. M. Brunette P. Tengvall M. Textor P. Thomsen [eds.], Springer-Verlag, Berlin Heildelberg, 2001, pp. 703-746.
Open DOI Search in Google Scholar
Garcia C., Cere S., Duran A.: Bioactive coatings deposited on titanium alloys.352 (2006) 3488-3495.
Open DOI Search in Google Scholar
Andrade M. C., Filgueiras M. R. T., Ogasawara T.: Hydrothermal nucleation of hydroxyapatite on titanium surface.22 (2002) 505-510.
Open DOI Search in Google Scholar
Yang B., Uchida M., Kim H.-M., Zhang X., Kokubo T.: Preparation of bioactive titanium metal via anodic oxidation treatment.25 (2004), 1003-1010.
Search in Google Scholar
Zheng X., Huang M., Ding Ch.: Bond strength of plasma-sprayed hydroxyapatite/Ti composite coatings.21 (2000) 841-849.
Search in Google Scholar
Yang Y-CH.: Influence of residual stress on bonding strength of the plasma-sprayed hydroxyapatite coating after the vacuum heat treatment.201 (2007) 7187-7193.
Search in Google Scholar
Zhang S., Wang Y. S., Zeng X. T., Cheng K., Qian M., Sun D. E., Wenig W. J., Chia W. Y.: Evaluation of interfacial shear strength and residual stress of sol-gel derived fluoridated hydroxyapatite coatings on Ti6A14V substrates.74 (2007) 1884-1893.
Search in Google Scholar
Lynn A. K., DuQuesnay D. L.: Hydroxyapatite-coated Ti-6A1-4V. Part 1: the effect of coating thickness on mechanical fatigue behaviour.23 (2002) 1937-1946.
Search in Google Scholar
Teraoka K., Ito A., Maekawa K., Onuma K., Tateishi T., Tsutsumi S.: Mechanical properties of hydroxyapatite and OH-carbonated hydroxyapatite single crystals.77 (1998) 1560-1568.
Search in Google Scholar
Zhang Ch., Leng Y., Chen J.: Elastic and plastic behaviour of plasma-sprayed hydroxyapatite coatings on a Ti-6A1-4V substrate.22 (2001) 1357-1363.
Search in Google Scholar
Yong Han, Junma Nan, Kewei Xu: Residula stresses in plasma-sprayed hydroxyapatite coatings,18 (1999) 1087-1089.
Search in Google Scholar
Fogarassy P., Cofino B., Millet P., Lodini A.: Residual stress in hydroxyapatite coating - nonlinear analysis an high-energy synchrotron measurements., vol. 52, No 7 (2005) 1161-1166.
Search in Google Scholar