FEM Approach to Estimate the Behaviour of Biocomposite Metal-Surface Coating Systems

Sobieszczyk, S.; Wojnicz, W.; Nowak, B.

doi:10.2478/v10077-008-0020-7

Abstract

A three dimensional (3D) model of biocomposite metal-surface coating system, which is influenced by known external forces, is proposed. This model consists of the metallic substrate (Ti6A14V) and the hydroxyapatite (HA) coating. Using FEM (finite element method), strain-stress maps of model were generated for investigating relations between the extreme stress of HA coating and the magnitude of external force and the thickness of the coating. The analysis of numerical simulations results confirms that the system with the greatest coating thickness (i.e. 10^-3 m) has the least extreme stress in this surface coating.

References

Liu X., Poon R. W. Y., Kwok S. C. H., Chu P. K., Ding Ch.: Plasma surface modification of titanium for hard tissue replacements. Surface & Coatings Techn. 186 (2004) 227-233.
Search in Google Scholar
Windler M., Klabunde R.: Titanium for hip and knee prostheses. [In] Titanium in Medicine, D. M. Brunette P. Tengvall M. Textor P. Thomsen [eds.], Springer-Verlag, Berlin Heildelberg, 2001, pp. 703-746.10.1007/978-3-642-56486-4_21
Search in Google Scholar
Garcia C., Cere S., Duran A.: Bioactive coatings deposited on titanium alloys. Journal of Non-Crystalline Solids 352 (2006) 3488-3495.10.1016/j.jnoncrysol.2006.02.110
Search in Google Scholar
Andrade M. C., Filgueiras M. R. T., Ogasawara T.: Hydrothermal nucleation of hydroxyapatite on titanium surface. Journal of the European Ceramic Society 22 (2002) 505-510.10.1016/S0955-2219(01)00311-9
Search in Google Scholar
Yang B., Uchida M., Kim H.-M., Zhang X., Kokubo T.: Preparation of bioactive titanium metal via anodic oxidation treatment. Biomaterials 25 (2004), 1003-1010.
Search in Google Scholar
Zheng X., Huang M., Ding Ch.: Bond strength of plasma-sprayed hydroxyapatite/Ti composite coatings. Biomaterials 21 (2000) 841-849.
Search in Google Scholar
Yang Y-CH.: Influence of residual stress on bonding strength of the plasma-sprayed hydroxyapatite coating after the vacuum heat treatment. Biomaterials 201 (2007) 7187-7193.
Search in Google Scholar
Zhang S., Wang Y. S., Zeng X. T., Cheng K., Qian M., Sun D. E., Wenig W. J., Chia W. Y.: Evaluation of interfacial shear strength and residual stress of sol-gel derived fluoridated hydroxyapatite coatings on Ti6A14V substrates. Engineering Fracture Mechanics 74 (2007) 1884-1893.
Search in Google Scholar
Lynn A. K., DuQuesnay D. L.: Hydroxyapatite-coated Ti-6A1-4V. Part 1: the effect of coating thickness on mechanical fatigue behaviour. Biomaterials 23 (2002) 1937-1946.
Search in Google Scholar
Teraoka K., Ito A., Maekawa K., Onuma K., Tateishi T., Tsutsumi S.: Mechanical properties of hydroxyapatite and OH-carbonated hydroxyapatite single crystals. Journal of Dental Research 77 (1998) 1560-1568.
Search in Google Scholar
Zhang Ch., Leng Y., Chen J.: Elastic and plastic behaviour of plasma-sprayed hydroxyapatite coatings on a Ti-6A1-4V substrate. Biomaterials 22 (2001) 1357-1363.
Search in Google Scholar
Yong Han, Junma Nan, Kewei Xu: Residula stresses in plasma-sprayed hydroxyapatite coatings, Journal of Materials Science Letters 18 (1999) 1087-1089.
Search in Google Scholar
Fogarassy P., Cofino B., Millet P., Lodini A.: Residual stress in hydroxyapatite coating - nonlinear analysis an high-energy synchrotron measurements. IEEE translations on biomedical engineering, vol. 52, No 7 (2005) 1161-1166.
Search in Google Scholar

FEM Approach to Estimate the Behaviour of Biocomposite Metal-Surface Coating Systems

Abstract

Paradigm

My account