References
- Heydemann, P. L. M., Welch, W. E. (1975). Piston gauges. In Le Neindre, B., Voder, B. (eds.) Experimental Thermodynamics. London: Butterworths, 147-201.
- Yadav, S., Prakash, O., Gupta, V. K., Bandyopadhyay, A. K. (2007). The effect of pressure-transmitting fluids in the characterization of a controlled clearance piston gauge up to 1 GPa. Metrologia, 44, 222-233.
- Sabuga, W., Bergogilo, M., Rabault, T., Waller, B., Torres, J. C., Olson, D. A., Agarwal, A., Kobata, T., Bandyopadhyay, A. K. (2005). Final report on Key comparison CCM.P-K7 in the range 10 MPa to 100 MPa of hydraulic gauge pressure. Metrologia (Tech. Suppl.), 42, 07005.
- Driver, R. G., Olson, D. A., Yadav, S., Bandyopadhyay, A. K. (2006). Final report on APMP.SIM. M.P-K7: Bilateral comparison between NIST (USA) and NPLI (India) in the hydraulic pressure region 40 MPa to 200 MPa. Metrologia, 43, 07003.
- Yadav, S., Bandyopadhyay, A. K., Dilawar, N., Gupta, A. C. (2002). Intercomparison of national hydraulic pressure standards up to 500 MPa. Measurement + Control, 35, 47-51.
- Sabuga, W., Olson, D. A., Torres, J. C., Yadav, S., Jin, Y., Otal, P., Kobata, T. (2011). CCM key comparison for 500 MPa range of hydraulic gauge pressure (CCM.P-K13). In 5th CCM International Conference on Pressure Metrology (CCMP5), 2-5 May 2011, Berlin, Germany.
- Yadav, S., Gupta, V. K., Prakash, O., Bandyopadhyay, A. K. (2005). Proficiency testing through interlaboratory comparison in the pressure range up to 70 MPa using pressure dial gauge as an artifact. Journal of Scientific and Industrial Research, 64 (10), 722-740.
- Yadav, S., Prakash, O., Gupta, V. K., Kumaraswamy, B. V., Bandyopadhyay, A. K. (2008). Evaluation of interlaboratory performance through proficiency testing using pressure dial gauge in the hydraulic pressure measurement up to 70 MPa. MAPAN - Journal of Metrology Society of India, 23 (2), 79-99.
- Birks, A. W. (1981). Strain gauge pressure transducer. Belfast: Queen's University of Belfast. (Internal Report No. 1566)
- Kobata, T., Ide, K., Kajikawa, H., Sabuga, W., Scheppner, S., Schultz, W. (2010). Final report on supplementary comparison APMP. M.P-S8 in hydraulic gauge pressure from 100 MPa to 1000 MPa. Metrologia, 47, 07009.
- Kumar, Y., Kumar, V., Jain, K. K., Kashyap, S. C. (1999). A capacitive pressure gauge as a reliable transfer pressure standards. Sensors and Actuators, B55, 217-221.
- Juanarena, D. W., Keeter, S., Albert, W. C. A monolithic quartz resonator pressure transducer for high accuracy and stability pressure measurement. Application note P0001. www.pressuresystems.com
- Yadav, S., Bandyopadhyay, A. K., Gupta, V. K., Gupta, A. C. (2001). A reliable quartz digital transfer pressure standard for high pressure measurements up to 275 MPa. Journal of the Instrument Society of India, 30 (1), 43-51.
- Kobata, T., Bandyopadhyay, A. K., Moore, K., Eltawil, A. A. E., Woo, S. Y., Chan, T. K., Jian, W., Man, J., Con, N. N., Fatt, C. S., Permana, W., Aldammd, M., Sabuga, W., Changpan, T., Hung, C. C., Pengcheng, Z. (2005). Final report on Key comparison APMP. M.P-K7 in hydraulic gauge pressure from 10 MPa to 100 MPa. Metrologia (Tech. Suppl.), 42, 07006.
- Busse, D. W. (1987). Quartz transducers for precision under pressure. Mechanical Engineering, 109 (5).
- Yadav, S., Vijayakumar, D. A., Bandyopadhyay, A. K., Gupta, A. C. (2000). A proposal for the establishment of measurement uncertainty of pressure dial gauges and transducers. Cal Lab: The International Journal of Metrology, 6 (2).
- Yadav, S., Gupta, V. K., Prakash, O., Bandyopadhyay, A. K. (2005). Evaluation of associated uncertainties in calibration of direct pressure indicating electromechanical devices. Measurement Science Review, 5, 104-114.
- Yadav, S., Gupta, V. K., Bandyopadhyay, A. K. (2010). Investigations on measurement uncertainty and stability of pressure dial gauges and transducers. Measurement Science Review, 10 (4), 130-135.