References
- European Commission. (2002). Directive 2002/44/EC of the European Parliament and of the Council of 25 June 2002 on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (vibration). Official Journal of the European Communities, L 177, 13-19.
- European Committee for Standardisation. (2007). Mechanical Vibration - Measurement and Calculation of Occupational Exposure to Whole-Body Vibration with Reference to Health - Practical Guidance. EN 14253:2003+A1:2007. Brussels, Belgium.
- Pinto, I., Stacchini, N. (2006). Uncertainty in the evaluation of occupational exposure to whole-body vibration. Journal of Sound and Vibration, 298 (3), 556-562.
- Bruel & Kjaer Sound & Vibration Measurement A/S. (2009). Stand-Alone Recorder - LAN-XI-Notar.http://www.bksv.com
- RION Co. Ltd. (2009). 4/8-Channel Data Recorder DA-20/40.http://www.rion.co.jp/english
- Wölfel Meßsyteme Software GmbH + Co. KG (2009). EVEC Prospectus.http://www.woelfel.de
- Marjanen, Y. (2006). Long-term measurements and analysis of day-to-day variability on whole body vibration exposure levels in work environments. In Proceedings of the 13th Intl. Congress on Acoustics and Vibration, 2-6 July, 2003. Vienna, Austria, 887-891.
- International Organization for Standardization. (2005). Human Response to Vibration - Measuring Instrumentation. ISO 8041. Geneva, Switzerland.
- Blood, R.P., Ploger, J.D., Yost, M.G., Ching, R.P., Johnson, P.W. (2010). Whole body vibration exposures in metropolitan bus drivers: A comparison of three seats. Journal of Sound and Vibration, 329 (1), 109-112.
- International Standards Organisation. (1992). Mechanical Vibration - Laboratory Method for Evaluating Vehicle Seat Vibration - Part 1. ISO 10326-1. Geneve, Switzerland.
- European Committee for Standardisation. (1994). Mechanical Vibration - Laboratory Method for Evaluation Vehicle Seat Vibration - Part 1. EN 30326-1. Brussels, Belgium.
- Human Factors Research Unit, Institute of Sound and Vibration, University of Southampton. (2005). EU Projects VIBSEAT.http://www.humanvibration.com/humanvibration/EU/vibseat.html
- Doebelin, E.O. (2003). Measurement Systems Application and Design (5th ed.). New York, USA: McGraw Hill.
- Webster, J.G. (Ed.) (2001). Acceleration measurement. In Wiley Encyclopedia of Electrical and Electronic Engineering. New York: John Wiley & Sons, vol. 1, 7-13.
- Stein, G.J., Chmúrny, R., Rosík, V. (2007). Measurement and analysis of low frequency vibration. Measurement Science Review, 7 (4), 47-50.
- Bernstein, J., Miller, R., Kelley, W., Ward, P. (1999). Low-noise MEMS vibration sensor for geophysical applications. Journal of MEMS, 8 (4), 433-438.
- Doescher, J. (1999). A High Performance Surface Micromachined Accelerometer. Technical Note. Norwood, Massachusetts, USA: Analog Devices Inc.
- Bernstein, J. (2003). An overview of MEMS inertial sensing technology. Sensors Magazine, February 1, 2003.
- Gabrielson, T.B. (1995). Fundamental noise limits for miniature acoustic and vibration sensors. Journal of Vibration and Acoustics, 117 (4), 405-410.
- Harley, J.A., Kenny, T.W. (2000). 1/F noise considerations for the design and process optimisation of piezoresistive cantilevers. Journal of MEMS, 9 (2), 226-235.
- Crossbow Technology Inc. (2005). Crossbow CLX Series Datasheet.http://www.xbow.com/index.html
- Data Translation Inc. (2005). DT 9816 Prospectus.http://www.datatranslation.com