Cabling Arrangement Influence on Repeatability of Immunity EMC Measurements

Hallon, J.; Bittera, M.; Smieško, V.; Kováč, K.

doi:10.2478/v10048-008-0023-x

.blurhash-client-img { display: none !important; }

Cabling Arrangement Influence on Repeatability of Immunity EMC Measurements

Measurement Science Review

Volume 8 (2008): Issue 4 (August 2008)

By: J. Hallon, M. Bittera, V. Smieško and K. Kováč

Open Access

|Aug 2008

Abstract

The paper deals with the analysis of induced current of differential loops of transmission lines during immunity test against electromagnetic field measurement. The influence of geometrical configuration of cabling arrangement on induced current values is surveyed. The problem is described for the case of a short two-wire line creating differential mode loop. The current induced at both ends of the line is the characteristics observed in the performed studies. The comparison between the results of measurements on real physical line, numerical simulations and analytical solution is presented.

References

Paul, C. R. (1994). Analysis of multiconductor transmission lines. New York, USA: Wiley Interscience.
Search in Google Scholar
Paul, C. R. (1994). A SPICE model for multiconductor transmission lines excited by an incident electromagnetic field. IEEE Transactions on Electromagnetic Compatibility36(4), 342 - 354.10.1109/15.328864
Search in Google Scholar
Beggio, A., Bono, G., Zich, R. E. (1999). Analysis of the unwanted effects on the radiated emissions and susceptibility measurements due to the introduction of a wooden table. In IEEE EMC Symposium 1999, 2-6 August 1999 (pp. 761-764). Seattle, USA.10.1109/ISEMC.1999.810114
Search in Google Scholar
Beeckman, P. A. (2001). The influence of positioning tables on the results of radiated EMC measurements. In IEEE EMC Symposium 2001, 13-17 August 2001 (pp. 280-285). Montreal, Canada.10.1109/ISEMC.2001.950635
Search in Google Scholar
Omid, M., Kami, Y., Hayakawa, M. (1997). Field coupling to nonuniform and uniform transmission lines. IEEE Transactions on Electromagnetic Compatibility39(3), 201 - 211.10.1109/15.618047
Search in Google Scholar
Adams, J. W., Cruz, J., Melquist, D. (1992). Comparison measurements of currents induced by radiation and injection. IEEE Transactions on Electromagnetic Compatibility34(3), 360-362.10.1109/15.155856
Search in Google Scholar
ANALOG DEVICES, Inc. (2003) Low cost DC-500 MHz, 92 dB logarithmic amplifier AD8307. Retrieved November 2003, from http://www.analog.com
Search in Google Scholar
Electromagnetic compatibility (EMC) - part 4-3: testing and measurement techniques - radiated, radio-frequency, electromagnetic field immunity test. (1996). Slovak version of European standard. STN EN 61000-4-3.
Search in Google Scholar

DOI: https://doi.org/10.2478/v10048-008-0023-x | Journal eISSN: 1335-8871

Journal RSS Feed

Language: English

Page range: 98 - 103

Published on: Aug 27, 2008

Published by: Slovak Academy of Sciences, Institute of Measurement Science

In partnership with: Paradigm Publishing Services

Publication frequency: Volume open

Keywords:

Electromagnetic compatibility,

immunity testing,

multiple transmission lines (MTL),

influence of electromagnetic field,

numerical simulation

Related subjects:

Engineering,

Electrical engineering,

Control engineering, metrology and testing

© 2008 J. Hallon, M. Bittera, V. Smieško, K. Kováč, published by Slovak Academy of Sciences, Institute of Measurement Science
This work is licensed under the Creative Commons License.

Volume 8 (2008): Issue 4 (August 2008)