Skip to main content
Have a personal or library account? Click to login
Modelling of heat transfer in a packed bed column Cover

Modelling of heat transfer in a packed bed column

Green Sciences
Volume 13 (2011): Issue 4 (December 2011)
By:   
Open Access
|Jan 2012
References

References

  1. Wen, D. & Ding, Y. (2006). Heat transfer of gas flow through a packed bed.61, 3532-3542. DOI: 10.1016/j.ces.2005.12.027.
    Open DOISearch in Google Scholar
  2. McGreavy, C., Foumeny, E.A. & Javed, K.H. (1986). Characterization of transport properties for fixed bed in terms of local bed structure and flow distribution.41, 787-797. DOI: 10.1016/0009-2509(86)87159-7.
    Open DOISearch in Google Scholar
  3. Stephenson, J.L. & Stewart, W.E. (1986). Optical measurements of porosity and fluid motion in packed beds.41, 2161-2170. DOI: 10.1016/0009-2509(86)87132-9.
    Open DOISearch in Google Scholar
  4. Kutsovsky, Y.E., Scriven, L.E., & Davis, H.T. (1196). NMR imaging of velocity profiles and velocity distribution in bead packs.8, 863-871. DOI: 10.1063/1.868867.
    Open DOISearch in Google Scholar
  5. Bey, O. & Eigenberger, G. (2001). Gas flow and heat transfer through catalyst filled tubes.40, 152-164. DOI: 10.1016/S1290-0729(00)01204-7.
    Open DOISearch in Google Scholar
  6. Collier, A., Hayhurst, A., Richardson, J. & Scott S. (2004). The heat transfer coefficient between particle and a bed (packed or fluidised) of much larger particles.59, 4613-4620. DOI: 10.1016/j.ces.2004.07.029.
    Open DOISearch in Google Scholar
  7. Calderbank, P. & Pogorski, L. (1957). Heat transfer in packed beds.35, 195-207.
    Search in Google Scholar
  8. Yagi, S. & Kunii, D. (1960). Studies on heat transfer near wall surfaces in packed beds.1, 97-104.
    Open DOISearch in Google Scholar
  9. Li, C. & Finlayson, B. (1977). Velocity, temperature and conversion profiles in fixed bed catalytic reactors.32, 853-861. DOI: 10.1016/0009-2509(77)80071-7.
    Open DOISearch in Google Scholar
  10. Demirel, Y., Sharma, R. & Al-Ali, H. (2000). On the effective heat transfer parameters in a packed bed.43, 327-332. DOI: 10.1016/S0017-9310(99)00126-X.
    Open DOISearch in Google Scholar
  11. Yuen, E.H.L., Sederman, A.J., Sani, F., Alexander, P. & Gladden, L.F. (2003). Correlations between Local Conversion and Hydrodynamics in a 3-D Fixed-Bed Exterification Process: An MRI and Lattice-Boltzmann Study.58, 613-619. DOI: 10.1016/S0009-2509(02)00586-9.
    Open DOISearch in Google Scholar
  12. Sullivan, S.P., Sani, F.M., Johns, M.L. & Gladden, L.F. (2005). Simulation of Packed Bed Reactors Using Lattice Boltzmann Methods.60, 3405-3418. DOI: 10.1016/j.ces.2005.01.038.
    Open DOISearch in Google Scholar
  13. Sørensen, J.P. & Stewart, W.E. (1974). Computation of Forced Convection in Slow Flow through Ducts and Packed Beds.29 (3) 819-825. DOI: 10.1016/0009-2509(74)80200-9.
    Open DOISearch in Google Scholar
  14. Guardo, A., Coussirat, M., Larrayoz, M.A., Recasens, F. & Egusquiza, E. (2005). Influence of the Turbulence Model in CFD Modeling of Wall-to-Fluid Heat Transfer in Packed Beds.60, 1733-1742. DOI: 10.1016/j.ces.2004.10.034.
    Open DOISearch in Google Scholar
  15. Dixon, A.G. & Nijemeisland, M. (2001). CFD as a Design Tool for Fixed-Bed Reactors.40, 5246-5254. DOI: 10.1021/ie001035a.
    Open DOISearch in Google Scholar
  16. Calis, H.P.A., Nijenhuis, J., Paikert, B.C., Dautzenberg, F.M. & van den Bleek, C.M. (2001). CFD Modelling and Experimental Validation of Pressure Drop and Flow Profile in a Novel Structured Catalytic Reactor Packing.56, 1713-1720. DOI: S0009-2509(00)00400-0.
    Open DOISearch in Google Scholar
  17. Magnico, P. (2003). Hydrodynamic and Transport Properties of Packed Beds in Small Tube-to-Sphere Diameter Ratio: Pore Scale Simulation Using an Eulerian and a Langrangian Approach.58, 5005-5024. DOI: 10.1016/S0009-2509(03)00282-3.
    Open DOISearch in Google Scholar
  18. Romkes, S.J.P., Dautzenberg, F.M., van den Bleek, C.M. & Calis, H.P.A. (2003). CFD Modelling and Experimental Validation of Particle-to-Fluid Mass and Heat Transfer in a Packed Bed at Very Low Channel-to-Particle Diameter Ratio.96, 3-13. DOI: 10.1016/j.cej.2003.08.026.
    Open DOISearch in Google Scholar
  19. Logtenberg, S. & Dixon, A. (1998). Computational fluid dynamics studies of fixed bed heat transfer.37, 7-21. DOI: 10.1016/S0255-2701(97)00032-9.
    Open DOISearch in Google Scholar
  20. Dixon, A.G. & van Dongeren, J.H. (1998). The influence of the tube and particle diameters at constant ration on heat transfer in packed beds.37, 23-32. DOI: S0255-2701(97)00033-0.
    Open DOISearch in Google Scholar
  21. ANSYS Fluent 12.0/12.1 Documentation, 2010.
    Search in Google Scholar
  22. Peters, S.T. (1998). Handbook of composites. Springer-Verlag.
    Open DOISearch in Google Scholar
  23. Ergun, S. (1952). Fluid flow through packed columns.48, 89-94.
    Search in Google Scholar
  24. Macdonald, I.F., El-Sayed, M.S., Mow, K. & Dullien, F.A.L. (1979). Flow through porous media - the Ergun equation revisited.18(3), 199-208. DOI: 10.1021/i160071a001.
    Open DOISearch in Google Scholar
  25. Mueller, G.E. (2010). Radial porosity in packed beds of spheres.203, 626-633. DOI: 10.1016/j.powtec.2010.07.007.
    Open DOISearch in Google Scholar
  26. Nijemeisland, M. & Dixon, A.G. (2001). Comparison of CFD simulations to experiment for convective heat transfer in a gas-solid fixed bed.82, 231-246. DOI: 10.1016/S1385-8947(00)00360-0.
    Open DOISearch in Google Scholar
  27. Freiwald, M.G. & Paterson, W.R. (1992). Accuracy of model predictions and reliability of experimental data for heat transfer in packed beds.47, 1545-1560. DOI: 10.1016/0009-2509(92)85003-T.
    Open DOISearch in Google Scholar
  28. Ding, Y.L., Wang, Z.L., Wen, D.S., Ghadiri, M., Fan, X.F. & Parker, D.J. (2005). Solids behaviour in a gas-solid two-phase mixture flowing through a packed particle bed.60, 5231-5239. DOI: 10.1016/j.ces.2005.04.052.
    Open DOISearch in Google Scholar
DOI: https://doi.org/10.2478/v10026-011-0046-1 | Journal eISSN: 3072-0389 (formerly 1899-4741) | Journal ISSN: 1509-8117
Journal RSS Feed
Language: English
Page range: 34 - 41
Published on: Jan 2, 2012
Published by: West Pomeranian University of Technology, Szczecin
In partnership with: Paradigm Publishing Services
Publication frequency: Volume open
Keywords:
Packed bed column,
Porous media model,
Heat transfer,
Computational Fluid Dynamics
Related subjects:
Industrial chemistry,
Biotechnology,
Chemical engineering,
Process engineering

© 2012 Paulina Pianko-Oprych, published by West Pomeranian University of Technology, Szczecin
This work is licensed under the Creative Commons License.

Volume 13 (2011): Issue 4 (December 2011)
Previous article
Next article