Preparation and properties of porous carbon material containing magnesium oxide

Przepiórski, Jacek; Czyżewski, Adam; Kapica, Joanna; de la Casa-Lillo, Miguel

doi:10.2478/v10026-011-0047-0

Abstract

Porous carbons loaded with magnesium oxide were prepared through one-step process. Poly(ethylene terephthalate) and natural magnesite were used as carbon source and MgO precursor, respectively. An impact of a temperature and relative amounts of raw components used for preparations on the textural parameters of resulting hybrid materials is presented and discussed. As found, pore structure parameters tend to decrease along with MgO loading and temperature used during preparation process. Micropore area is the parameter being reduced primarily.

References

Cambridge Filter Japan, Ltd. (2009). Product information. Received May 16, 2009, from http://www.cambridgefilter.com/english/productsE/tcc-en/tcc-en.htm
Search in Google Scholar
Liu, Z.-S. (2008). Adsorption of SO₂ and NO from incineration flue gas onto activated carbon fibers. Waste Manage., 28, 2329-2335. DOI:10.1016/j.wasman.2007.10.013.10.1016/j.wasman.2007.10.013
Search in Google Scholar
Aroua, M.K., Daud, W.M.A.A., Yin, C.Y. & Adinata, D. (2008). Adsorption capacities of carbon dioxide, oxygen, nitrogen and methane on carbon molecular basket derived from polyethyleneimine impregnation on microporous palm shell activated carbon. Sep. Purif. Technol., 62, 609-613. DOI:10.1016/j.seppur.2008.03.003.10.1016/j.seppur.2008.03.003
Search in Google Scholar
Houshmand, A., Wan Daud, W.M.A., & Shafeeyan, M. S. (2011). Exploring Potential Methods for Anchoring Amine Groups on the Surface of Activated Carbon for CO₂ Adsorption. Sep. Purif. Technol., 46, 1098-1112. DOI:10.1080/01496395.2010.546383.10.1080/01496395.2010.546383
Search in Google Scholar
Zhang, Z., Ma, X., Wang, D., Song C. & Wang, Y. (2011). Development of silica-gel-supported polyethylenimine sorbents for CO₂ capture from flue gas. AIChE J., DOI:10.1002/aic.12771.10.1002/aic.12771
Search in Google Scholar
Przepiórski, J., Yoshida, S. & Oya, A. (1999). Structure of K₂CO₃-loaded activated carbon fiber and its deodorization ability against H₂S gas. Carbon, 37, 1881-1890. DOI:10,1016/S0008-6223(99)00088-3.10.1016/S0008-6223(99)00088-3
Search in Google Scholar
Henning, K.D. & Schäfer, S. (1993). Impregnated activated carbon for environmental protection, Gas Sep. Purif., 7, 235-240. DOI:10.1016/0950-4214(93)80023-P.10.1016/0950-4214(93)80023-P
Search in Google Scholar
Hedin, N., Chen, L. & Laaksonen, A. (2010). Sorbents for CO₂ capture from flue gas—aspects from materials and theoretical chemistry. Nanoscale, 2, 1819-1841. DOI:10.1039/c0nr00042f.10.1039/c0nr00042f20680200
Search in Google Scholar
Wu, Z., Hao, N., Xiao, G., Liu, L., Webley, P. & Zhao, D. (2011). One-pot generation of mesoporous carbon supported nanocrystalline calcium oxides capable of efficient CO₂ capture over a wide range of temperatures. Phys. Chem. Chem. Phys., 13, 2495-2503. DOI:10.1039/c0cp01807d.10.1039/C0CP01807D21132180
Search in Google Scholar
Przepiórski, J. (2006). Activated carbon filters and their industrial applications in Activated Carbon Surfaces in Environmental Remediation (Interface Science and Technology, Volume 7, ed. T.J. Bandosz, chapter 9, ISBN:0-12-370536-3, pp.421-474). Academic Press.
Search in Google Scholar
Przepiórski, J., Abe, Y., Yoshida, S. & Oya, A. (1997). Preferential supporting of potassium carbonate around the peripheral region of activated carbon fiber. J. Mater. Sci. Lett., 16, 1312-1314. DOI:10.1023/A:1018599513817.10.1023/A:1018599513817
Search in Google Scholar
Yong, Z., Mata. V.G. & Rodrigues, A.E. (2001). Adsorption of carbon dioxide on chemically modified high surface area carbon-based adsorbents at high temperature. Adsorption, 7, 41-50. DOI:10.1023/A:1011220900415.10.1023/A:1011220900415
Search in Google Scholar
Bhagiyalakshmi, M., Hemalatha, P., Ganesh, M., Peng, M.M. & Jang, H.T. (2011). A direct synthesis of mesoporous carbon supported MgO sorbent for CO₂ capture. Fuel, 90, 1662-1667. DOI:10.1016/j.fuel.2010.10.050.10.1016/j.fuel.2010.10.050
Search in Google Scholar
She, L., Li, J., Wan, Y., Yao, X., Tu, B. & Zhao, D. (2011). Synthesis of ordered mesoporous MgO/carbon composites by a one-pot assembly of amphiphilic triblock copolymers. J. Mater. Chem., 21, 795-800. DOI:10.1039/c0jm02226h.10.1039/C0JM02226H
Search in Google Scholar
Bhagiyalakshmi, M., Lee, J.Y. & Jang, H.T. (20011). Synthesis of mesoporous magnesium oxide: Its application to CO₂ chemisorption. Int. J. Greenh. Gas Con., 4, 51-56. DOI:10.1016/j.ijggc.2009.08.001.10.1016/j.ijggc.2009.08.001
Search in Google Scholar
Lee, S.J., Jung, S.Y., Lee, S.C., Jun, H.K., Ryu, C.K. & J.C. Kim. (2009). SO₂ removal and regeneration of MgO-based sorbents promoted with titanium oxide. Ind. Eng. Chem. Res., 48, 2691-2696. DOI:10.1021/ie801081u.10.1021/ie801081u
Search in Google Scholar
Hassanzadeh, A. & Abbasian, J. (2010). Regenerable MgO-based sorbents for high-temperature CO₂ removal from syngas: 1. Sorbent development, evaluation, and reaction modeling. Fuel, 89, 1287-1297. DOI:10.1016/j.fuel.2009.11.017.10.1016/j.fuel.2009.11.017
Search in Google Scholar
Inagaki, M., Kobayashi, S., Koijn, F., Tanaka, N., Morishita, T. & Tryba, B. (2004). Pore structure of carbon coated on ceramic particles. Carbon, 42, 3153-3158. DOI:10.1016/j.carbon.2004.07.029.10.1016/j.carbon.2004.07.029
Search in Google Scholar
Inagaki, M., Kato, M., Morishita, T. Morita, K. (2007). Direct preparation of mesoporous carbon from a coal tar pitch. Carbon, 45, 1121-1124. DOI:10.1016/S1095-6433(98)00008-7.10.1016/S1095-6433(98)00008-7
Search in Google Scholar
Przepiórski, J., Karolczyk, J., Takeda, K., Tsumura, T., Toyoda, M. & Morawski, A. M. (2009). Porous carbon obtained by carbonization of PET Mixed with basic magnesium carbonate: Pore structure and pore creation mechanism. Ind. Eng. Chem. Res. 48, 7110-7116. DOI:10.1021/ie801694t.10.1021/ie801694t
Search in Google Scholar
Przepiórski, J., Karolczyk, J., Tsumura, T., Toyoda, M., Inagaki, M. & Morawski, A. W. (2011). Effect of some thermally unstable magnesium compounds on the yield of char formed from poly(ethylene terephthalate). J. Therm. Anal. Calorim. DOI:10.1007/s10973-011-1910-1.10.1007/s10973-011-1910-1
Search in Google Scholar

Preparation and properties of porous carbon material containing magnesium oxide

Abstract

Paradigm

My account