The effect of the surface modification of carbon nanotubes on their dispersion in the epoxy matrix
By: Maria Wladyka-Przybylak, Dorota Wesolek, Weronika Gieparda, Anna Boczkowska and Ewelina Ciecierska
Open Access
|Jun 2011References
- Iijima, S. (1991). Helical microtubules of graphitic carbon.354, 56-58. doi:10.1038/354056a0.
- Nesterenko, A.M., Kolesnik, N.F., Akhmatov, Y.S., Sukhomlin, V.I. & Prilutski, O.V. (1982). Metals 3 UDK 869.173.23,, USSR, 12-16.
- Iijima, S. & Ichihashi, T. (1993). Single-shell carbon nanotubes of 1-nm diameter.363, 603-605. doi:10.1038/363603a0.
- Bethune, D.S., Kiang, C.H., Devries, M.S., Gorman, G., Savoy, R. & Vazquez, J. et al. (1993). Cobalt-catalysed growth of carbon nanotubes with single-atomic-layer walls.363, 605-607. doi:10.1038/363605a0.
- Ajayan, P.M. & Iijima, S. (1993). Capillarity-induced filling of carbon nanotubes. Nature 361, 333-334. doi:10.1038/361333a0.
- Thostenson, E.T., Ren, Z.F., Chou, T.-W. (2001). Advances in the science and technology of carbon nanotubes and their composites: a review.61(13), 1899-1912. doi:10.1016/S0266-3538(01)00094-X.
- Wildoer, J.W.G., Venema, L.C., Rinzler, A.G., Smalley, R.E. & Dekker, C. (1998). Electronic structure of atomically resolved carbon nanotubes.391, 59-62. doi:10.1038/34139.
- Hone, J., Batlogg, B., Benes, Z., Johnson, A.T. & Fischer, J.E. (2000). Quantized Phonon Spectrum of Single-Wall Carbon Nanotubes.289, 1730. doi: 10.1126/science.289.5485.1730.
- Ruoff, R.S. & Lorents, D.C. (1995). Mechanical and thermal properties of carbon nanotubes. Carbon 33(7), 925-930. doi:10.1016/0008-6223(95)00021-5.
- Treacy, M.M.J., Ebbesen, T.W. & Gibson, J.M. (1996). Exceptionally high Young's modulus observed for individual carbon nanotubes.381, 678-680. doi:10.1038/381678a0
- Gojny, F.H., Wichmann, M.H.G., Fiedler, B. & Schulte, K. (2005). Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites - A comparative study.65(15-16), 2300-2313. doi:10.1016/j.compscitech.2005.04.021
- Prolongo, S.G., Rosario, G. & Urena A. (2006). Comparative study on the adhesive properties of different epoxy resins.26(3), 125-132. doi:10.1016/j.ijadhadh.2005.02.004.
- Neffgen, B. (1985). Epoxy resins in the building industry - 25 years of experience.7(4), 253-260. doi:10.1016/0262-5075(85)90046-6.
- Toldy, A., Szolnoki, B. & Marosi, G. (2010) Flame retardancy of fibre-reinforced epoxy resin composites for aerospace applications.Article in Press. doi:10.1016/j.polymdegradstab.2010.03.021.
- Kagathara, V.M. & Parsania, P.H. (2001) Preparation and evaluation of mechano-electrical properties and chemical resistance of epoxy laminates of halogenated bisphenol-C resins.20(6), 713-716. doi:10.1016/S0142-9418(00)00071-4.
- Atta, A.M., Abdou, M.I., Elsayed, A. & Raga M.E. (2008). New bisphenol novolac epoxy resins for marine primer steel coating applications.63(4), 372-376. doi:10.1016/j.porgcoat.2008.06.013.
- Kovacs, J.Z., Andersen, K., Puls, J.R., Pardo Garcia, K., Schossig, M., Schulte, K. & Bauhofer, W. (2007). Analyzing the quality of carbon nanotube dispersions in polymers using scanning electron microscopy.45(6), 1279-1288. doi:10.1016/j.carbon.2007.01.012.
- Abdalla, M., Detrick, D., Adibempe, D., Nyairo, E., Robinson, P. & Thompson, G. (2007). The effect of interfacial chemistry on molecular mobility and morphology of multiwalled carbon nanotubes epoxy nanocomposite.48(19), 5662-5670. doi:10.1016/j.polymer.2007.06.073.
- Young, R.J. & Lucas, M. (2007). Effect of residual stresses upon the Raman radial breathing modes of nanotubes in epoxy composites.67(5), 840-843. doi:10.1016/j.compscitech.2005.12.031
- Jianfeng, S., Weishi, H., Liping, W., Yizhe, H. & Mingxin, Y. (2007). Thermo-physical properties of epoxy nanocomposites reinforced with amino-functionalized multi-walled carbon nanotubes.38, 1331-1336. doi:10.1016/j.compositesa.2006.10.012.
- Liu, J.Q., Xiao, T., Liao K. & Wu, P. (2007). Interfacial design of carbon nanotube polymer composites: a hybrid system of noncovalent and covalent functionalizations.18(16), 165701. doi:10.1088/0957-4484/18/16/165701.
- Zhou, Y., Pervin, F., Lewis, L. & Jeelani, S. (2007). Experimental study on the thermal and mechanical properties of multi-walled carbon nanotube-reinforced epoxy.452, 657-664. doi:10.1016/j.msea.2006.11.066
- Gojny, F.H. & Schulte, K. (2004). Functionalisation effect on the thermo-mechanical behaviour of multi-wall carbon nanotube/epoxy-composites.64(15), 2303. doi:10.1016/j.compscitech.2004.01.024.
- Hadjiev, V.G., Lagoudas, D.C., Oh, E.S., Thakre, P., Davis, D., Files, B.S., Yowell, L., Arepalli, S., Bahr, J.L. & Tour, J.M. (2006). Buckling instabilities of octadecylamine functionalized carbon nanotubes embedded in epoxy. Compos.66(1), 128-136. doi:10.1016/j.compscitech.2005.01.004.
- Martin, C.A., Sandler, J.K.W., Windle, A.H., Schwarz, M.K., Baunhofer, W., Schulte, K. & Shaffer, M.S.P. (2005). Electric field-induced aligned multi-wall carbon nanotube networks in epoxy composites.46(3), 877-886. doi:10.1016/j.polymer.2004.11.081.
- Fidelus, J.D., Wiesel, E., Gojny, F.H., Schulte, K. & Wagner H.D. (2005). Thermo-mechanical properties of randomly oriented carbon/epoxy nanocomposites.36(11), 1555-1561. doi:10.1016/j.compositesa.2005.02.006.
- Gojny, F.H., Wichmann, M.H.G., Fiedler, B., Bauhofer, W. & Schulte, K. (2005). Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites.36(11), 1525-1535. doi:10.1016/j.compositesa.2005.02.007.
- Potschke, P., Fornes, T.D. & Paul, D.R. (2002). Rheological behavior of multiwall carbon nanotubes/polycarbonate composites.43, 3247-55. doi:10.1016/S0032-3861(02)00151-9.
- Mitchell, C.A., Bahr, J.L., Arepalli, S., Tour, J.M. & Krishnamoorti, R. (2002). Dispersion of functionalized carbon nanotubes in polystyrene. Macromolecules 35, 8825-30. doi: 10.1021/ma020890y.
- Kim, J.A., Seong, D.G., Kang, T.J. & Youn, J.R. (2006). Effects of surface modification on rheological and mechanical properties of CNT/epoxy composites.44(10), 1898-1905. doi:10.1016/j.carbon.2006.02.026.
- Gojny, F.H., Nastalczyk, J., Rosłaniec, Z., Schulze, K. (2003). Surface modified multi-walled carbon nanotubes in CNT/epoxy-composites.370, 820-824. 10.2478/v10026-011-0027-4
DOI: https://doi.org/10.2478/v10026-011-0026-5 | Journal eISSN: 3072-0389 (formerly 1899-4741) | Journal ISSN: 1509-8117
Language: English
Page range: 62 - 69
Published on: Jun 16, 2011
Published by: West Pomeranian University of Technology, Szczecin
In partnership with: Paradigm Publishing Services
Publication frequency: Volume open
Related subjects:
© 2011 Maria Wladyka-Przybylak, Dorota Wesolek, Weronika Gieparda, Anna Boczkowska, Ewelina Ciecierska, published by West Pomeranian University of Technology, Szczecin
This work is licensed under the Creative Commons License.