Computational Fluid Dynamics Analysis of Flow Characteristics and Heat Transfer Variabilities in Multiple Turbine Blade Cooling Channels

Elmenshawy, Adham Ahmed Awad Elsayed; Alomar, Iyad; Arshad, Ali; Medvedevs, Aleksandrs

doi:10.2478/ttj-2024-0008

Abstract

In the realm of gas turbine engine technology, turbine blades are persistently subjected to extreme thermal conditions due to prolonged exposure to high-temperature gases. Given this operating environment, devising effective cooling strategies is paramount for ensuring the turbine’s safety and longevity. Despite the critical nature of this issue, existing literature scarcely addresses cooling channels that incorporate factors like variable cross-sectional attributes and rotational effects. In this study, Computational Fluid Dynamics (CFD) and numerical methodologies were employed to analyze the flow mechanism and performance of three distinct cooling channels characterized by variable cross-sectional features. The results indicate a marginal thermal performance improvement of up to 3% for U-shaped cooling channels, specifically at a Reynolds number of 20,000, in comparison to Net cooling channels. Conversely, jet impingement channels outperform U-shaped channels by an impressive margin of over 11%. Additionally, at a Reynolds number of 60,000, jet impingement cooling channels manifest a significant upsurge of nearly 25% in the ratio between average Nusselt number, and the reference Nusselt number when compared with U-shaped and Net cooling channels.

References

Ackert, S. (2011) Engine maintenance concepts for financiers elements of turbofan shop maintenance costs. Available at: http://www.aircraftmonitor.com/uploads/1/5/9/9/15993320/engine_mx_concepts_for_financiers___v2.pdf (Accessed: September 1, 2011).
Search in Google Scholar Back to article
Afanasyev, V.N., Chudnovsky, Ya.P., Leontiev, A.I., Roganov P.S. (1993) Turbulent flow friction and heat transfer characteristics for spherical cavities on a flat plate. Experimental Thermal and Fluid Science, 7(1), 1–8. Available at: https://doi.org/10.1016/0894-1777(93)90075-T.
Search in Google Scholar Back to article
Al-Obaidi, A. R., Chaer, I. (2021) Study of the flow characteristics, pressure drop and augmentation of heat performance in a horizontal pipe with and without twisted tape inserts. Case Studies in Thermal Engineering, 25. https://doi.org/10.1016/j.csite.2021.100964.
Search in Google Scholar Back to article
ANSYS Manual. (2006) Fluent 6.2 Documentation File.
Search in Google Scholar Back to article
Brown, G.O. (2002) The History of the Darcy-Weisbach Equation for Pipe Flow Resistance. In: Environmental and Water Resources History Proceedings. Reston, VA: American Society of Civil Engineers, 34–43. Available at: https://doi.org/10.1061/40650(2003)4.
Search in Google Scholar Back to article
Chyu, M. (1997) Concavity enhanced heat transfer in an internal cooling passage. In: Proceedings of the ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition. https://www.academia.edu/77268876/Concavity_Enhanced_Heat_Transfer_in_an_Internal_Cooling_Passage (Accessed: 1 June 1997).
Search in Google Scholar Back to article
Coletti, F., Scialanga, M., Arts, T. (2012) Experimental investigation of conjugate heat transfer in a rib-roughened trailing edge channel with crossing jets, Journal of Turbomachinery, 134(4). https://doi.org/10.1115/1.4003727.
Search in Google Scholar Back to article
Elmenshawy, A.A.A.E., Alomar, I. (2022) Statistics and Investigation of CF6 Jet Engines Hot Section Failures. In: Reliability and Statistics in Transportation and Communication. RelStat 2021. Lecture Notes in Networks and Systems, 410, 88–98. Springer, Cham 2022. https://doi.org/10.1007/978-3-030-96196-1_9.
Search in Google Scholar Back to article
Glynn, C., O’Donovan, T. and Murray, D. (2005) Jet impingement cooling. In: Proceedings of the 9th UK National Heat Transfer Conference, 5–6. Manchester, UK.
Search in Google Scholar Back to article
Hylton, L. D., York, R.E. (1983) Analytical and experimental evaluation of the heat transfer distribution over the surfaces of turbine vanes. NASA Contractor Report. Available at: https://ntrs.nasa.gov/citations/19830020105.
Search in Google Scholar Back to article
Moon, H.K., O’Connell, T., Glezer, B. (2000) Channel height effect on heat transfer and friction in a dimpled passage. Journal of Engineering for Gas Turbines and Power, 122(2), 307–313. https://doi.org/10.1115/1.483208.
Search in Google Scholar Back to article
Nikora, V. (2006) Hydrodynamics of aquatic ecosystems. Acta Geophysica, 55(1), 3–10. DOI:10.2478/s11600-006-0043-6.
Search in Google Scholar Back to article
Nirmalan, V., Hylton, L.D. (1989) An experimental study of turbine vane heat transfer with leading edge and downstream film cooling. Heat Transfer; Electric Power; Industrial and Cogeneration. American Society of Mechanical Engineers, 4. https://doi.org/10.1115/89-GT-69.
Search in Google Scholar Back to article
Nozhnitsky, Y.A. (2018) The problem of ensuring reliability of gas turbine engines. In: IOP Conference Series: Materials Science and Engineering, 302, 012082. https://doi.org/10.1088/1757-899X/302/1/012082.
Search in Google Scholar Back to article
Organ, A.J. (2007) Counter-flow spiral heat exchanger – Spirex, in the air engine. Elsevier, 29–38. https://doi.org/10.1533/9781845693602.1.29.
Search in Google Scholar Back to article
Rossman, C.D. (2016) Analysis of a coupled micro-and triple-impingement cooling analysis of a coupled micro-and triple-impingement cooling configuration in the C3X vane configuration in the C3X vane. https://commons.erau.edu/edt.
Search in Google Scholar Back to article
Shen, Zh., Qu, H.,Zhang, D., Xie, Y. (2013) Effect of bleed hole on flow and heat transfer performance of U-shaped channel with dimple structure. International Journal of Heat and Mass Transfer, 66, 10–22. https://doi.org/10.1016/j.ijheatmasstransfer.2013.07.008.
Search in Google Scholar Back to article
Uysal, U., Li, P.-W., Chyu, M.K., Cunha, F.J. (2006) Heat transfer on internal surfaces of a duct subjected to impingement of a jet array with varying jet hole-size and spacing. Journal of Turbomachinery, 128(1), 158–165. https://doi.org/10.1115/1.2101859.
Search in Google Scholar Back to article
Wang, J., Sunden, B., Zeng, M., Wang, Q. (2015) Film cooling effects on the tip flow characteristics of a gas turbine blade. Propulsion and Power Research, 4(1), 9–22. https://doi.org/10.1016/j.jppr.2015.02.003.
Search in Google Scholar Back to article
Wang, K., Li, H. Zhu, J. (2014) Experimental study of heat transfer characteristic on jet impingement cooling with film extraction flow. Applied Thermal Engineering, 70(1), 620–629. https://doi.org/10.1016/j.applthermaleng.2014.05.077.
Search in Google Scholar Back to article
Wang, L., Wang, S., Wen, F., Zhou, X., Wang, Zh. (2018) Heat transfer and flow characteristics of U-shaped cooling channels with novel wavy ribs under stationary and rotating conditions. International Journal of Heat and Mass Transfer, 126, 312–333. https://doi.org/10.1016/j.ijheatmasstransfer.2018.05.123.
Search in Google Scholar Back to article
Xu, T., Shi, D., Zhang, D., Xie, Y. (2023) Flow and heat transfer characteristics of the turbine blade variable cross-section internal cooling channel with turning vane. Applied Sciences, 13(3), 1446. https://doi.org/10.3390/app13031446.
Search in Google Scholar Back to article
Yamane, Y., Ichikawa, Y., Yamamoto, M. Honami, Sh. (2012) Effect of injection parameters on jet array impingement heat transfer. International Journal of Gas Turbine, Propulsion and Power Systems, 4(1), 27–34. https://doi.org/10.38036/jgpp.4.1_27.
Search in Google Scholar Back to article
Yang, Sh.-F., Wu, H.-W., Han, J.-Ch., Zhang, L., Moon, H.-K. (2017) Heat transfer in a smooth rotating multi-passage channel with hub turning vane and trailing-edge slot ejection. International Journal of Heat and Mass Transfer, 109, 1–15. https://doi.org/10.1016/j.ijheatmasstransfer.2017.01.059.
Search in Google Scholar Back to article
Zaretsky, E. V., Litt, J.S., Hendricks, R.C. (2012) Determination of turbine blade life from engine field data. https://ntrs.nasa.gov/search.jsp?R=20120007098.
Search in Google Scholar Back to article

Computational Fluid Dynamics Analysis of Flow Characteristics and Heat Transfer Variabilities in Multiple Turbine Blade Cooling Channels

Abstract

Paradigm

My account