References
- 1. (AASHTO), A. A. of S. H. and T. O. (2010) Highway Safety Manual (First). American Association of State Highway and Transportation Officials.
- 2. (FWHA), F. H. A. (2019) Interactive Highway Safety Design Model (IHSDM): Overview. U.S. Department of Transportation, Federal Highway Administration. Available: https://highways.dot.gov/research/safety/interactive-highway-safety-design-model/interactive-highway-safety-design-model-ihsdm-overview
- 3. Abdel-Aty, M. A., Lee, C., Park, J., Wang, J.-H., Abuzwidah, M. & Al-Arif, S. (2014) Validation and application of highway safety manual (Part D) in Florida (No. BDK78-977–14; Issue May). Florida Department of Transportation. Available: http://www.cmfclearinghouse.org/study_detail.cfm?stid=433
- 4. Abdel-Aty, M. & Keller, J. (2005) Exploring the overall and specific crash severity levels at signalized intersections. Accident Analysis and Prevention, 37(3), 417–425. DOI:10.1016/j.aap.2004.11.00210.1016/j.aap.2004.11.00215784195
- 5. Ahmed, M. & Chalise, R. (2018) Calibration of the Highway Safety Manual’s Safety Performance Functions for Rural Two-Lane Highways with Regional Considerations for the Rocky Mountains and Plain Regions (MPC-18-344; MPC-18-344). Available: http://www.ugpti.org/resources/reports/details.php?id=901
- 6. Brimley, B., Saito, M. & Schultz, G. (2012) Calibration of highway safety manual safety performance function. Transportation Research Record, 2279, 82–89. DOI:10.3141/2279-1010.3141/2279-10
- 7. Burgess, M. (2005) Contrasting Rural and Urban Fatal Crashes 1994–2003. In U.S. Dept. of Transportation, National Highway Traffic Safety Administration (Issue DOT HS 809 896). Available: http://purl.access.gpo.gov/GPO/LPS97980
- 8. Chandler, B. & Anderson, R. (2010) Implementing the High Risk Rural Roads Program. In U.S. Federal Highway Administration (FHWA) (Issue FHWA-SA-10-012). Available: http://safety.fhwa.dot.gov/local_rural/training/fhwasa10012/fhwasa10012.pdf
- 9. Dominguez-Lira, C. A., Castro, M., Pardillo-Mayora, J. M. & Gascon-Varon, C. (2010) Adaptation and Calibration of IHSDM for Highway Projects Safety Evaluation in Spain. Proceedings of the 4th International Symposium on Highway Geometric Design, 12. Available: https://trid.trb.org/view/1098951
- 10. Fitzpatrick, K., Schneider IV, W. & Carvell, J. (2006) Using the rural two-lane highway draft prototype chapter. Transportation Research Record, 1950, 44–54. DOI:10.3141/1950-0610.1177/0361198106195000106
- 11. Haleem, K. & Abdel-Aty, M. (2010) Examining traffic crash injury severity at unsignalized intersections. Journal of Safety Research, 41(4), 347–357. DOI:10.1016/j.jsr.2010.04.00610.1016/j.jsr.2010.04.00620846551
- 12. Huang, H., Chin, H. C. & Haque, M. M. (2008) Severity of driver injury and vehicle damage in traffic crashes at intersections: A Bayesian hierarchical analysis. Accident Analysis and Prevention, 40(1), 45–54. DOI:10.1016/j.aap.2007.04.00210.1016/j.aap.2007.04.00218215531
- 13. Jonsson, T., Lyon, C., Ivan, J. N., Washington, S. P., Van Schalkwyk, I. & Lord, D. (2009). Differences in the performance of safety performance functions estimated for total crash count and for crash count by crash type. Transportation Research Record, 2102, 115–123. DOI:10.3141/2102-1510.3141/2102-15
- 14. Koorey, G. (2010) Calibration of Highway Crash Prediction Models for other Countries – a Case Study with IHSDM. 4th International Symposium on Highway Geometric Design, 16. Available: https://trid.trb.org/view/1098932
- 15. Kweon, Y. J., Lim, I. K., Turpin, T. L. & Read, S. W. (2014) Guidance on customization of highway safety manual for Virginia: Development and application. Transportation Research Record, 2435, 27–36. DOI:10.3141/2435-0410.3141/2435-04
- 16. Marchionna, A., Perco, P. & Falconetti, N. (2012) Evaluation of the Applicability of IHSDM Crash Prediction Module on Italian Two-Lane Rural Roads. Procedia – Social and Behavioral Sciences, 53, 933–942. DOI:10.1016/j.sbspro.2012.09.94210.1016/j.sbspro.2012.09.942
- 17. Martinelli, F., La Torre, F. & Vadi, P. (2009) Calibration of the highway safety manual’s accident prediction model for italian secondary road network. Transportation Research Record, 2103, 1–9. DOI:10.3141/2103-0110.3141/2103-01
- 18. Mehta, G. & Lou, Y. (2013) Calibration and development of safety performance functions for alabama. Transportation Research Record, 2398, 75–82. DOI:10.3141/2398-0910.3141/2398-09
- 19. Oxley, J., Corben, B., Koppel, S., Fildes, B., Jacques, N., Symmons, M. & Johnston, I. (2004) Cost-Effective Infrastructure Measures on Rural Roads (Report No. 217; Issue Report No. 217). Monash University Accident Research Centre. Available: https://www.monash.edu/muarc/archive/our-publications/reports/muarc217
- 20. Park, J. & Abdel-Aty, M. (2017) Safety performance of combinations of traffic and roadway cross-sectional design elements at straight and curved segments. Journal of Transportation Engineering, 143(6), 1–9. DOI:10.1061/JTEPBS.000003310.1061/JTEPBS.0000033
- 21. Persaud, B., Lord, D. & Palmisano, J. (2002) Calibration and transferability of accident prediction models for urban intersections. Transportation Research Record, 1784, 57–64. DOI:10.3141/1784-0810.3141/1784-08
- 22. Persaud, B. N., Retting, R. A. & Lyon, C. A. (2004) Crash reduction following installation of centerline rumble strips on rural two-lane roads. Accident Analysis and Prevention, 36, 1073–1079. DOI:10.1016/j.aap.2004.03.00210.1016/j.aap.2004.03.00215350884
- 23. Persaud, B., Saleem, T., Faisal, S., Lyon, C., Chen, Y. & Sabbaghi, A. (2012) Adoption of Highway Safety Manual Predictive Methodologies Canadian Highways. “Implementation of Predictive Methods in the Procedures and Processes of Transportation Agencies” Session of the 2012 Conference of the Transportation Association of Canada Fredericton, 1–30. Available: http://conf.tac-atc.ca/english/annualconference/tac2012/docs/session15/persaud.pdf
- 24. Qin, X., Chen, Z., Cutler, C. & Vachal, K. (2013) Evaluating Local and Tribal Rural Road Design with the Interactive Highway Safety Design Model (IHSDM) (DP-264; Issue September). North Dakota State University, Upper Great Plains Transportation Institute.
- 25. Qin, X., Chen, Z. & Shaon, R. R. (2019) Developing jurisdiction-specific SPFs and crash severity portion functions for rural two-lane, two-way intersections. Journal of Transportation Safety and Security, 11(6), 629–641. DOI:10.1080/19439962.2018.145805210.1080/19439962.2018.1458052
- 26. Qin, X., Shaon, M. R. R. & Chen, Z. (2016) Developing analytical procedures for calibrating the Highway Safety Manual predictive methods. Transportation Research Record, 2583, 91–98. DOI:10.3141/2583-1210.3141/2583-12
- 27. Sacchi, E., Persaud, B. & Bassani, M. (2012) Assessing International Transferability of Highway Safety Manual Crash Prediction Algorithm and Its Components. Transportation Research Record: Journal of the Transportation Research Board. DOI:10.3141/2279-1110.3141/2279-11
- 28. Sawalha, Z. & Sayed, T. (2006) Transferability of accident prediction models. Safety Science, 44(3), 209–219. DOI:10.1016/j.ssci.2005.09.00110.1016/j.ssci.2005.09.001
- 29. Sun, C., Edara, P., Brown, H., Zhu, Z. & Rahmani, R. (2014) Calibration of Highway Safety Manual Work Zone Crash Modification Factors. In Smart Work Zone Deployment Initiative (InTrans Project 06-277; Iowa DOT TPF-5(081); Vol. 5, Issue June). InTrans Project Reports. Available: https://lib.dr.iastate.edu/intrans_reports/88
- 30. Sun, X., Li, Y., Magri, D. & Shirazi, H. H. (2006) Application of highway safety manual draft chapter: Louisiana experience. Transportation Research Record, 1950, 55–64. DOI:10.3141/1950-0710.1177/0361198106195000107
- 31. Tang, E., Peach, K., DeFisher, J. & Eccles, K. (2018) Transportation Safety Planning and the Zero Deaths Vision: A Guide for Metropolitan Planning Organizations and Local Communities (Issue FHWA-SA-18-024). Federal Highway Administration (FHWA). Available: https://rosap.ntl.bts.gov/view/dot/43671
- 32. Tarko, A. P., Romero, M., Hall, T. & Sultana, A. (2018) Updating the Crash Modification Factors and Calibrating the IHSDM for Indiana (Publication No. FHWA/IN/JTRP-2018/03; Publication No. FHWA/IN/JTRP-2018/03). Joint Transportation Research Program Publication No. FHWA/IN/JTRP-2018/03. DOI:10.5703/128828431664610.5703/1288284316646
- 33. Tola, A. M. & Gebissa, A. (2019) Assessment on the Impacts of Road Geometry and Route Selection on Road Safety: A Case of Mettu-Gore Road, Ethiopia. American Journal of Civil Engineering and Architecture, 7(1), 13–19. DOI:10.12691/ajcea-7-1-210.12691/ajcea-7-1-2
- 34. Towards zero: Ambitious road safety targets and the safe system approach. (2008) In: Towards Zero: Ambitious Road Safety Targets and the Safe System Approach (Vol. 9789282101). Organization for Economic Cooperation and Development (OECD). DOI:10.1787/9789282101964-en10.1787/9789282101964-en
- 35. Xie, F., Gladhill, K., Dixon, K. & Monsere, C. (2011) Calibration of highway safety manual predictive models for oregon state highways. Transportation Research Record, 2241, 19–28. DOI:10.3141/2241-0310.3141/2241-03
- 36. Zegeer, C. V., Reinfurt, D. W., Hummer, J., Herf, L. & Hunter, W. (1988) Safety effects of cross-section design for two-lane roads. Transportation Research Record, 1195, 20–32. Available: https://trid.trb.org/view/302144