References
- Azzouz, A. S., M. M. Baligh, and A. J. Whittle. 1990. “Shaft resistance of piles in clay.” J. Geotech. Eng. 116(2): 205–221.
- Briaud, J. and L. Tucker. 1984. “Piles in sand: A method including residual stress.” J. Geotech. Eng. 110(11): 1666–1680.
- Briaud, J. L. 2013. “Geotechnical engineering: Unsaturated and saturated soils.” Wiley, New Jersey.
- Brinch Hansen, J. 1970. “A revised and extended formula for bearing capacity.” Danish Geotechnical Institute, Bull, Copenhagen.
- Chin, F. K. 1970. “Estimation of ultimate load of piles not carried to failure.” Proceedings 2nd Southeast Asia Conference on Soil Engineering: 81–92.
- Di Donna, A., A. Ferrari, and L. Laloui. 2016. “Experimental investigations of the soil–concrete interface: Physical mechanisms, cyclic mobilization, and behaviour at different temperatures.” Can. Geotech. J. 53: 1–14.
http://dx.doi.org/10.1139/cgj-2015-0294 - Fioravante, V. 2002. “On the shaft friction modelling of non-displacement piles in sand.” Soils Found. 42(2): 23–33.
- Fleming, W. G. K. 1992. “A new method for single pile settlement prediction and analysis.” Géotechnique 42(3): 411–425.
- Galvis-Castro, A. C., D. Tovar-Valencia Ruben, R. Salgado, and M. Prezzi. 2019. “Compressive and tensile shaft resistance of nondisplacement piles in sand.” J. Geotech. Geoenviron. Eng. 145(9): 04019041.
- Glazer, Z. 1977. “Mechanika gruntów” in Polish. Wydawnictwa Geologiczne, Warszawa.
- Gumny, K., PhD. 2021. “Soil-structure interaction in single pile-raft foundation.” West Pomeranian University of Technology in Szczecin, Szczecin.
- Gwizdała, K. 1996. “Analiza osiadań pali przy wykorzystaniu funkcji transformacyjnych” in Polish. Zeszyty Naukowe Politechniki Gdańskiej, Nr 532, Budownictwo Wodne Nr 41.
- Gwizdała, K., and M. Stęczniewski. 2015. “Wykorzystanie metody funkcji transformacyjnych do analizy nośności i osiadań pali CFA” in Polish. Inżynieria Morska i Geotechnika 2015(3): 433–437.
- Ismael, N. F. 1989. “Skin friction of driven piles in calcareous sands.” J. Geotech. Eng. 115(1): 135–139.
- Jardine, R. J., R. Standing Jr., and F. Chow. C. 2006. “Some observations of the effects of time on the capacity of piles driven in sand.” Géotechnique 56(4): 227–244.
- Lee, C. Y., and H. G. Poulos. 1991. “Tests on model instrumented grouted piles in offshore calcareous soil.” J. Geotech. Eng. 117(11): 1738–1753.
- Lehane, B. M., R. J. Jardine, A. J. Bond, and R. Frank. 1993. “Mechanisms of shaft friction in sand from instrumented pile tests,” J. Geotech. Eng. 119(1): 19–35
- Le Kouby, A., J. C. Dupla, J. Canou, and R. Francis. 2013. “Pile response in sand: Experimental development and study.” Int. J. Physical Model. Geotech. 13(4): 122–137.
- Mazurkiewicz, B. 1966; “Sprawdzanie dopuszczalnej nośności pali w terenie. Cz. 2” in Polish. Inżynieria i budownictwo nr 6: 214–218.
- Meyer, Z., and M. Kowalów. 2010. “Model krzywej aproksymującej wyniki testów statycznych pali” in Polish. Inżynieria Morska i Geotechnika 3: 438–441.
- Meyer, Z., and P. Siemaszko. 2019. “Static load test analysis based on soil field investigations.” Bull. Pol. Acad. Sci.: Tech Sci. 67(2): 329–337.
- Meyer, Z., and P. Siemaszko. 2021. “Analysis of the pile skin resistance formation.” Studia Geotechnica et Mechanica 43(4): 380–388.
- Meyer, Z., and K. Stachecki. 2018. “Static load test curve (Q–s) conversion in to pile of different size.” Ann. Warsaw Univ. Life Sci. – SGGW 50: 171–182.
- Meyer, Z., and K. Żarkiewicz. 2018. “Skin and toe resistance mobilisation of pile during laboratory static load test.” Studia Geotechnica et Mechanica 40: 1–5.
- Miller, G. A., and A. J. Lutenegger. 1997. “Influence of pile plugging on skin friction in overconsolidated clay.” J. Geotech. Geoenviron. Eng. 123(6): 525–533.
- Mochtar, I. B., and T. B. Edil. 1988. “Shaft resistance of model pile in clay.” J. Geotech. Eng. 114(11): 1227–1244.
- N-Geo. 2018. “Soil geotechnical parameters based on CPTu investigation.” Part of the “Nowa Przystań” project documentation.
- Siemaszko, P., PhD. 2022. “Analysis of the pile shortening effect on skin resistance formation.” West Pomeranian Institute of Technology in Szczecin, Szczecin.
- Tehrani, F. S., F. Han, R. Salgado, M. Prezzi, R. D. Tovar, and A. G. Gastro. 2016. “Effect of surface roughness on the shaft resistance of non-displacement piles embedded in sand.” Géotechnique 66(5): 386–400.
- Terzaghi, K., and R. B. Peck. 1967. “Soil mechanics in engineering practice.” Wiley and Sons, New York.
- Thilakasiri, H. S. 2007. “Qualitative interpretation of load-settlement curves of bored piles.” Eng.: J. Inst. Eng. (Sri Lanka) 40(4): 61–68.
- Tomlinson, M., and J. Woodward. 2008. “Pile design and construction practice.” Taylor and Francis London, New York.
- Zhang, C., G. D. Nguyen, and I. Einav. 2013. “The end-bearing capacity of piles penetrating into crushable soils.” Géotechnique 63(5): 341–354.
http://dx.doi.org/10.1680/geot.11.P.117 - Żarkiewicz, K., PhD. 2017. “Analysis of pile shaft bearing capacity formation in non-cohesive soils based on laboratory model investigation” in Polish. West Pomeranian University of Technology in Szczecin, Szczecin
- Project documentation by FBA for “Nowa Przystań” address Leona Heyki 3 Szczecin.
- Scientific description of the static load test results with extensometers for “Nowa Przystań” address Leona Heyki 3 Szczecin.