References
- Briaud J.L. (2013). Geotechnical engineering: unsaturated and saturated soils, Wiley, New Jersey. p. 575.
- Dunnicliff J. (1988). Geotechnical instrumentation for monitoring field performance. Wiley. Washington.
- Fellenius B.H. (2001) From strain measurements to load in an instrumented pile. Geotechnical News Magazine, Vol. 19, No. 1, pp. 35–38.
- Fellenius B.H. (2002). Determining the true distributions of load in instrumented piles. ASCE International Deep Foundation Congress “Down to Earth Technology”. Orlando, Florida.
- Fellenius B.H. (2006) Results from long-term measurement in piles of drag load and downdrag, Canadian Geotechnical Journal, Vol. 43, No. 4, pp. 409–430.
- Fellenius B.H., Kim S.R., Chung S.G. (2009) Long-term monitoring of strain in instrumented piles, ASCE Journal of Geotechnical and Geoenvironmental Engineering, Vol. 135, No. 11, pp. 1583–1595.
- Kacprzak G. M. (2018) Współpraca fundamentu płytowopalowego z podłożem gruntowym, Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa
- Krasiński A., Kusio T. (2015). Pile model tests using strain gauge technology. Studia Geotechnica et Mechanica. Vol. 37, No. 3.
- Krasiński A., Sikora Z., Kusio T. (2013) Scientific report of pile bearing capacity prepared for Keller Sp. Z o. o., Gdańsk
- Krasiński A., Wiszniewski M. (2017). Static load test on instrumented pile – field data and numerical simulations. Studia Geotechnica et Mechanica, Vol. 39, No. 3.
- Meyer Z., Kowalów M. (2010) Model krzywej aproksymującej wyniki testów statycznych pali, Inżynieria Morska i Geotechnika, Vol. 3. pp. 438–441.
- Meyer Z., Siemaszko P. (2019) Static load test analysis based on soil field investigations, Bulletin of the Polish Academy of Sciences Technical Sciences, Vol. 67, No. 2. pp. 329–337.
- Meyer Z., Stachecki K. (2018) Static load test curve (Q–s) conversion in to pile of different size. Ann. Warsaw Univ. Life Sci. – SGGW, Vol. 50. pp. 171–182.
- Meyer Z., Żarkiewicz K. (2018). Skin and toe resistance mobilisation of pile during laboratory static load test, Studia Geotechnica et Mechanica, Vol. 40. pp. 1–5.
- Thilakasiri H.S.(2007). Qualitative interpretation of load-settlement curves of bored piles. Engineer, Vol. 40, No. 4. pp. 61–68.
- Wrana B. (2015). Pile load capacity – calculations methods. Studia Geotechnica et Mechanica. Vol. 37, No. 4.
- Żarkiewicz K., PhD. (2017) Analysis of pile shaft bearing capacity formation in non-cohesive soils based on laboratory model investigation, West Pomeranian University of Technology in Szczecin, Szczecin.