Economical and Safe Method of Granular Material Storage in Silos in Offshore Port Terminals

Mateusz Sondej; Chandana Ratnayake; Michał Wójcik

doi:10.2478/pomr-2018-0097

.blurhash-client-img { display: none !important; }

Economical and Safe Method of Granular Material Storage in Silos in Offshore Port Terminals

Polish Maritime Research

Volume 25 (2018): Issue 3 (September 2018)

By: Mateusz Sondej, Chandana Ratnayake and Michał Wójcik

Open Access

|Oct 2018

Abstract

The article discusses issues related with storage of granular materials in silos made of corrugated sheets and reinforced with vertical ribs. Advantages and disadvantages of these structures are named, and typical technological solutions used by largest silo producers are presented. Moreover, basic assumptions of Eurocode 3 are discussed in the context of determining the buckling load capacity of a ribbed jacket. Alternative methods are indicated to determine the silo stability using analytical and FEM based methods. General conclusions are formulated with respect to designing of silos made of corrugated sheets.

References

1. Hotała E., Aniszczyk A.: Prototype silo structure with flaccid shell for biomass storage (in Polish). Materiały Budowlane 5 (2013) 52–54.
Search in Google Scholar Back to article
2. EN 1993-4-1, Eurocode 3. Design of Steel Structures. Part 4–1: Silos. Brussels: CEN, 2007.
Search in Google Scholar Back to article
3. Kuczyńska N., Wójcik M., Tejchman J. Effect of bulk solid on strength of cylindrical corrugated silos during filling. Journal of Constructional Steel Research 115 (2015) 1–17, DOI: 10.1016/j.jcsr.2015.08.00210.1016/j.jcsr.2015.08.002
Open DOI Search in Google Scholar Back to article
4. Wójcik M., Tejchman J. Buckling analyses of metal cylindrical silos containing bulk solids during filling. Particulate Science and Technology 34, 4 (2016) 461–469, DOI: 10.1080/02726351.2016.118520210.1080/02726351.2016.1185202
Open DOI Search in Google Scholar Back to article
5. Tejchman J.; Bauer E.; Wu W., Effect of fabric anisotropy on shear localization in sand during plane strain compression. Acta Mechanica 189, 1-2 (2007) 23-51.10.1007/s00707-006-0416-6
Search in Google Scholar Back to article
6. Kozicki J., Niedostatkiewicz M., Tejchman A., Muhlhaus H. Discrete modelling results of a direct shear test for granular materials versus FE results. Granular Matter 15, 5 (2013) 607-627, DOI: 10.1007/s10035-013-0423-y10.1007/s10035-013-0423-y
Open DOI Search in Google Scholar Back to article
7. Kozicki J., Tejchman, A., Mühlhaus H.-B. Discrete simulations of a triaxial compression test for sand by DEM. International Journal for Numerical and Analytical Methods in Geomechanics, 18 (2014) 1923-1952, DOI: 10.1002/nag.228510.1002/nag.2285
Open DOI Search in Google Scholar Back to article
8. Nitka M., Tejchman J., Kozicki J., Lesniewska D. DEM analysis of micro-structural events within granular shear zones under passive earth pressure conditions. Granular Matter 17, 3 (2015), 325-343, DOI: 10.1007/s10035-015-0558-010.1007/s10035-015-0558-0
Search in Google Scholar Back to article
9. Wójcik M., Härtl J., Ooi J.Y., Rotter J.M., Ding S., Enstad G.G. Experimental investigation of flow pattern and wall pressure distribution in a silo with double-cone insert. Particle&Particle System Characterization 24, 4-5 (2007) 296-303, DOI: 10.1002/ppsc.20060112010.1002/ppsc.200601120
Open DOI Search in Google Scholar Back to article
10. Iwicki P., Wójcik M., Tejchman J. Failure of cylindrical steel silos composed of corrugated sheets and columns and repair methods using a sensitivity analysis. Engineering Failure Analysis 18 (2011) 2064-2083, DOI: /10.1016/j.engfailanal.2011.06.01310.1016/j.engfailanal.2011.06.013
Search in Google Scholar Back to article
11. Mariak A., Miśkiewicz M, Meronk B., Pyrzowski Ł. and Wilde K. Reference FEM model for SHM system of cable-stayed bridge in Rzeszów. Advances in Mechanics: Theoretical, Computational and Interdisciplinary Issues – Kleiber et al. (Eds), Taylor & Francis Group, London (2016) 383–38710.1201/b20057-82
Search in Google Scholar Back to article
12. Miśkiewicz M., Pyrzowski Ł., Chróścielewski J., Wilde K.: Structural Health Monitoring of Composite Shell Footbridge for Its Design Validation. Proceedings 2016 Baltic Geodetic Congress (Geomatics)/ed. Juan E. Guerrero Los Alamitos: IEEE Computer Society Order Number E5972 (2016) 228-233, DOI: 10.1109/BGC.Geomatics.2016.4810.1109/BGC.Geomatics.2016.48
Open DOI Search in Google Scholar Back to article
13. Wilde, K., Miśkiewicz, M., Chróścielewski, J., SHM System of the Roof Structure of Sports Arena „Olivia”. Structural Health Monitoring II, DEStech Publ. Inc. (2013) 1745-1752,
Search in Google Scholar Back to article
14. Janowski A., Szulwic J., Zuk M. 3D modelling of liquid fuels base infrastructure for the purpose of visualization and geometrical analysis. SGEM2015 Conference Proceedings, ISBN 978-619-7105-31-5 / ISSN 1314-2704, June 18-24, 2015, Book1 Vol. 1, 753-764, 2015, DOI: 10.5593/SGEM2015/B11/S6.09610.5593/SGEM2015/B11/S6.096
Open DOI Search in Google Scholar Back to article
15. Janowski A., Nagrodzka-Godycka K., Szulwic J., Ziolkowski P.: Remote sensing and photogrammetry techniques in diagnostics of concrete structures. Computers and Concrete 18, 3,405-420, DOI: 10.12989/cac.2016.18.3.40510.12989/cac.2016.18.3.405
Search in Google Scholar Back to article
16. Burdziakowski P., Janowski A., Kholodkov A. Matysik K., Matysik M., Przyborski M., Szulwic J., Tysiac P.: Maritime laser scanning as the source for spatial data. Polish Marit. Res., 22, 4, 9-14, 2015, DOI: 10.1515/pomr-2015-006410.1515/pomr-2015-0064
Open DOI Search in Google Scholar Back to article
17. Wójcik M., Iwicki P., Tejchman J. 3D buckling analysis of a cylindrical metal bin composed of corrugated sheets strengthened by vertical stiffeners. Thin-Walled Struct. 49 (2011) 947-963, DOI:10.1016/j.tws.2011.03.01010.1016/j.tws.2011.03.010
Open DOI Search in Google Scholar Back to article
18. Sondej M., Iwicki P., Tejchman J., Wójcik M. Critical assessment of Eurocode approach to stability of metal cylindrical silos with corrugated walls and vertical stiffeners. Thin-Walled Structures 95 (2015) 335-346, DOI: 10.1016/j.tws.2015.07.01510.1016/j.tws.2015.07.015
Open DOI Search in Google Scholar Back to article
19. Sondej M., Iwicki P., Wójcik M., Tejchman J. Stability analyses of a cylindrical steel silo with corrugated sheets and columns. Steel and Composite Structures 20, 1 (2016) 147-166, DOI : 10.12989/scs.2016.20.1.14710.12989/scs.2016.20.1.147
Search in Google Scholar Back to article
20. Iwicki P., Tejchman A., Chróścielewski J.: Dynamic FE simulations of buckling process in thin-walled cylindrical metal silos. Thin-Walled Structures 84 (2014) 344-359, DOI: 10.1016/j.tws.2014.07.01110.1016/j.tws.2014.07.011
Open DOI Search in Google Scholar Back to article
21. Wójcik M., Tejchman J. Simulation of buckling process of cylindrical metal silos with flat sheets containing bulk solids. Thin-Walled Structures 93 (2015) 122-136, DOI: 10.1016/j.tws.2015.02.02510.1016/j.tws.2015.02.025
Open DOI Search in Google Scholar Back to article
22. Tejchman J., Wójcik M.: Modeling of shear localization during confined granular flow in silos within non-local hypoplasticity. Powder Technology 192, 3 (2009), 298-310, DOI: 10.1016/j.powtec.2009.01.02110.1016/j.powtec.2009.01.021
Open DOI Search in Google Scholar Back to article
23. Tejchman J., Niemunis A.: FE-studies on shear localization in an anisotropic micro-polar hypoplastic granular material. Granular Matter 8, 3-4 (2006), DOI: 10.1007/s10035-006-0009-z10.1007/s10035-006-0009-z
Open DOI Search in Google Scholar Back to article
24. Tejchman J., Wu W.: Non-coaxiality and stress-dilatancy rule in granular materials: FE investigation within micro-polar hypoplasticity, International Journal for Numerical and Analytical Methods in Geomechanics 33, 1 (2009) 117-142,10.1002/nag.715
Search in Google Scholar Back to article
25. Bielewicz E, Górski J.: Shells with random geometric imperfections simulation-based approach. International Journal of Non-Linear Mechanics 37, 4–5 (2002) 777–784, DOI: 10.1016/S0020-7462(01)00098-110.1016/S0020-7462(01)00098-1
Open DOI Search in Google Scholar Back to article
26. Górski J., Mikulski T., Oziębło M., Winkelmann K.: Effect of geometric imperfections on aluminum silo capacities Stahlbau 84, 1 (2015) 52-57, DOI: 10.1002/stab.20151022410.1002/stab.201510224
Open DOI Search in Google Scholar Back to article
27. EN 1991-4, Eurocode 1: Actions on Structures. Part 4: Silos and Tanks. General Principles and Actions for the Structural Design of Tanks and Silos, 2009.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/pomr-2018-0097 | Journal eISSN: 2083-7429 | Journal ISSN: 1233-2585

Journal RSS Feed

Language: English

Page range: 62 - 68

Published on: Oct 23, 2018

Published by: Gdansk University of Technology

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

silo,

Related subjects:

Introductions and overviews,

Engineering, other,

Geosciences,

Atmospheric science and climatology,

Life sciences,

Life sciences, other

© 2018 Mateusz Sondej, Chandana Ratnayake, Michał Wójcik, published by Gdansk University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 25 (2018): Issue 3 (September 2018)