References
- 1. Hotała E., Aniszczyk A.: Prototype silo structure with flaccid shell for biomass storage (in Polish). Materiały Budowlane 5 (2013) 52–54.
- 2. EN 1993-4-1, Eurocode 3. Design of Steel Structures. Part 4–1: Silos. Brussels: CEN, 2007.
- 3. Kuczyńska N., Wójcik M., Tejchman J. Effect of bulk solid on strength of cylindrical corrugated silos during filling. Journal of Constructional Steel Research 115 (2015) 1–17, DOI: 10.1016/j.jcsr.2015.08.00210.1016/j.jcsr.2015.08.002
- 4. Wójcik M., Tejchman J. Buckling analyses of metal cylindrical silos containing bulk solids during filling. Particulate Science and Technology 34, 4 (2016) 461–469, DOI: 10.1080/02726351.2016.118520210.1080/02726351.2016.1185202
- 5. Tejchman J.; Bauer E.; Wu W., Effect of fabric anisotropy on shear localization in sand during plane strain compression. Acta Mechanica 189, 1-2 (2007) 23-51.
- 6. Kozicki J., Niedostatkiewicz M., Tejchman A., Muhlhaus H. Discrete modelling results of a direct shear test for granular materials versus FE results. Granular Matter 15, 5 (2013) 607-627, DOI: 10.1007/s10035-013-0423-y10.1007/s10035-013-0423-y
- 7. Kozicki J., Tejchman, A., Mühlhaus H.-B. Discrete simulations of a triaxial compression test for sand by DEM. International Journal for Numerical and Analytical Methods in Geomechanics, 18 (2014) 1923-1952, DOI: 10.1002/nag.228510.1002/nag.2285
- 8. Nitka M., Tejchman J., Kozicki J., Lesniewska D. DEM analysis of micro-structural events within granular shear zones under passive earth pressure conditions. Granular Matter 17, 3 (2015), 325-343, DOI: 10.1007/s10035-015-0558-0
- 9. Wójcik M., Härtl J., Ooi J.Y., Rotter J.M., Ding S., Enstad G.G. Experimental investigation of flow pattern and wall pressure distribution in a silo with double-cone insert. Particle&Particle System Characterization 24, 4-5 (2007) 296-303, DOI: 10.1002/ppsc.20060112010.1002/ppsc.200601120
- 10. Iwicki P., Wójcik M., Tejchman J. Failure of cylindrical steel silos composed of corrugated sheets and columns and repair methods using a sensitivity analysis. Engineering Failure Analysis 18 (2011) 2064-2083, DOI: /10.1016/j.engfailanal.2011.06.013
- 11. Mariak A., Miśkiewicz M, Meronk B., Pyrzowski Ł. and Wilde K. Reference FEM model for SHM system of cable-stayed bridge in Rzeszów. Advances in Mechanics: Theoretical, Computational and Interdisciplinary Issues – Kleiber et al. (Eds), Taylor & Francis Group, London (2016) 383–387
- 12. Miśkiewicz M., Pyrzowski Ł., Chróścielewski J., Wilde K.: Structural Health Monitoring of Composite Shell Footbridge for Its Design Validation. Proceedings 2016 Baltic Geodetic Congress (Geomatics)/ed. Juan E. Guerrero Los Alamitos: IEEE Computer Society Order Number E5972 (2016) 228-233, DOI: 10.1109/BGC.Geomatics.2016.4810.1109/BGC.Geomatics.2016.48
- 13. Wilde, K., Miśkiewicz, M., Chróścielewski, J., SHM System of the Roof Structure of Sports Arena „Olivia”. Structural Health Monitoring II, DEStech Publ. Inc. (2013) 1745-1752,
- 14. Janowski A., Szulwic J., Zuk M. 3D modelling of liquid fuels base infrastructure for the purpose of visualization and geometrical analysis. SGEM2015 Conference Proceedings, ISBN 978-619-7105-31-5 / ISSN 1314-2704, June 18-24, 2015, Book1 Vol. 1, 753-764, 2015, DOI: 10.5593/SGEM2015/B11/S6.09610.5593/SGEM2015/B11/S6.096
- 15. Janowski A., Nagrodzka-Godycka K., Szulwic J., Ziolkowski P.: Remote sensing and photogrammetry techniques in diagnostics of concrete structures. Computers and Concrete 18, 3,405-420, DOI: 10.12989/cac.2016.18.3.405
- 16. Burdziakowski P., Janowski A., Kholodkov A. Matysik K., Matysik M., Przyborski M., Szulwic J., Tysiac P.: Maritime laser scanning as the source for spatial data. Polish Marit. Res., 22, 4, 9-14, 2015, DOI: 10.1515/pomr-2015-006410.1515/pomr-2015-0064
- 17. Wójcik M., Iwicki P., Tejchman J. 3D buckling analysis of a cylindrical metal bin composed of corrugated sheets strengthened by vertical stiffeners. Thin-Walled Struct. 49 (2011) 947-963, DOI:10.1016/j.tws.2011.03.01010.1016/j.tws.2011.03.010
- 18. Sondej M., Iwicki P., Tejchman J., Wójcik M. Critical assessment of Eurocode approach to stability of metal cylindrical silos with corrugated walls and vertical stiffeners. Thin-Walled Structures 95 (2015) 335-346, DOI: 10.1016/j.tws.2015.07.01510.1016/j.tws.2015.07.015
- 19. Sondej M., Iwicki P., Wójcik M., Tejchman J. Stability analyses of a cylindrical steel silo with corrugated sheets and columns. Steel and Composite Structures 20, 1 (2016) 147-166, DOI : 10.12989/scs.2016.20.1.147
- 20. Iwicki P., Tejchman A., Chróścielewski J.: Dynamic FE simulations of buckling process in thin-walled cylindrical metal silos. Thin-Walled Structures 84 (2014) 344-359, DOI: 10.1016/j.tws.2014.07.01110.1016/j.tws.2014.07.011
- 21. Wójcik M., Tejchman J. Simulation of buckling process of cylindrical metal silos with flat sheets containing bulk solids. Thin-Walled Structures 93 (2015) 122-136, DOI: 10.1016/j.tws.2015.02.02510.1016/j.tws.2015.02.025
- 22. Tejchman J., Wójcik M.: Modeling of shear localization during confined granular flow in silos within non-local hypoplasticity. Powder Technology 192, 3 (2009), 298-310, DOI: 10.1016/j.powtec.2009.01.02110.1016/j.powtec.2009.01.021
- 23. Tejchman J., Niemunis A.: FE-studies on shear localization in an anisotropic micro-polar hypoplastic granular material. Granular Matter 8, 3-4 (2006), DOI: 10.1007/s10035-006-0009-z10.1007/s10035-006-0009-z
- 24. Tejchman J., Wu W.: Non-coaxiality and stress-dilatancy rule in granular materials: FE investigation within micro-polar hypoplasticity, International Journal for Numerical and Analytical Methods in Geomechanics 33, 1 (2009) 117-142,
- 25. Bielewicz E, Górski J.: Shells with random geometric imperfections simulation-based approach. International Journal of Non-Linear Mechanics 37, 4–5 (2002) 777–784, DOI: 10.1016/S0020-7462(01)00098-110.1016/S0020-7462(01)00098-1
- 26. Górski J., Mikulski T., Oziębło M., Winkelmann K.: Effect of geometric imperfections on aluminum silo capacities Stahlbau 84, 1 (2015) 52-57, DOI: 10.1002/stab.20151022410.1002/stab.201510224
- 27. EN 1991-4, Eurocode 1: Actions on Structures. Part 4: Silos and Tanks. General Principles and Actions for the Structural Design of Tanks and Silos, 2009.