References
- 1. Łabanowski J., Fydrych D., Rogalski G.: Underwater Welding - a review. Advances in Materials Science, 3/2008
- 2. Fydrych D., Łabanowski J., Rogalski G.: Weldability of high strength steels in wet welding conditions. Polish Maritime Research, vol. 20 (2013), no. 2, pp. 67-73
- 3. Matsunawa A., Nishiguchi K., Okamoto I.: Prediction of cooling rate and hardness of base metal in the underwater welding by local cavity process. Proceedings of the International Conference „Underwater Welding”, Trondheim, Norway 1983
- 4. Łabanowski J., Fydrych D., Rogalski G., Samson K.: Underwater welding of duplex stainless steel. Diffusion and Defect Data Pt.B: Solid State Phenomena 183 (2012), pp. 101-106
- 5. Fydrych D., Rogalski G.: Effect of underwater local cavity welding method conditions on diffusible hydrogen content in deposited metal. Welding International Vol. 27 (2013), Issue 3, pp. 196-202
- 6. Santos V. R., Monteiro M. J., Rizzo F.C., Bracarense A. Q., Pessoa E. C. P., Marinho R. R. Vieira L. A.: Development of an oxyrutile electrode for wet welding. Welding Journal, vol. 91 (2012), no. 12, pp. 319-328
- 7. Ghadimi P., Ghassemi H., Ghassabzadeh M., Kiaei Z.: Threedimensional simulation of underwater welding and investigation of effective parameters. Welding Journal, vol. 92 (2013), no. 8, pp. 239-249
- 8. Pessoa E., Bracarense A., Zica E., Liu S., Perez-Guerrero F.: Porosity variation along multi-pass underwater wet welds and its influence on mechanical properties. Journal of Materials Processing Technology. Vol. 179 (2006), Issues 1-3, pp. 239-243
- 9. Liu D., Zhang H., Yang K., Tang D. Feng J.: Microstructure evolution of HAZ in the multi-pass underwater wet welded joints. China Welding (English Edition), vol. 22 (2013), no. 1, pp. 30-34
- 10. Maksimov S. Y.: Underwater arc welding of higher strength low-alloy steels. Welding International, vol. 24 (2010), no. 6, pp. 449-454
- 11. Akselsen O. M., Fostervoll H., Ahlen C. H.: Hyperbaric GMA welding of duplex stainless steel at 12 and 35 bar. Welding Journal, vol. 88 (2009), no. 2, pp. 21-28
- 12. Pessoa E. C. P., Bracarense A. Q., Dos Santos V. R., Monteiro M. D. J., Vieira L. A., Marinho R. R.: Challenges to develop an underwater wet welding electrode for “class A welds” classification, as required in the AWS D3.6 code. ASM Proceedings of the International Conference: Trends in Welding Research 2013, pp. 259
- 13. Mazzaferro J. A. E., Machado I. G.: Study of arc stability in underwater shielded metal arc welding at shallow depths. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 223 (2009), no. 3, pp. 699-710
- 14. Zhao B., Wu C., Jia C., Yuan X.: Numerical analysis of the weld bead profiles in underwater wet flux-cored arc welding. Jinshu Xuebao/Acta Metallurgica Sinica, vol. 49 (2013), no. 7, pp. 797-803
- 15. AleAbbas F. M., Al-Ghamdi T. A., Liu S.: Comparison of solidification behavior between underwater wet welding and dry welding. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE 2011, pp. 285
- 16. Shi Y., Zheng Z., Huang J.: Sensitivity model for prediction of bead geometry in underwater wet flux cored arc welding. Transactions of Nonferrous Metals Society of China (English Edition), vol. 23 (2013), no. 7, pp. 1977-1984
- 17. Christensen N.: The metallurgy of underwater welding. Proceedings of the International Conference „Underwater Welding”, Trondheim, Norway 1983