Bead-On-Plate Welding on S235JR Steel by Underwater Local Dry Chamber Process

Grzegorz Rogalski; Jerzy Łabanowski; Dariusz Fydrych; Jacek Tomków

doi:10.2478/pomr-2014-0020

.blurhash-client-img { display: none !important; }

Bead-On-Plate Welding on S235JR Steel by Underwater Local Dry Chamber Process

Polish Maritime Research

Volume 21 (2014): Issue 2 (April 2014)

By: Grzegorz Rogalski, Jerzy Łabanowski, Dariusz Fydrych and Jacek Tomków

Open Access

|Jul 2014

Abstract

The article presents the results of the effect of parameters of underwater local dry chamber welding on the properties of padding welds. The effect of heat input and the type of shielding gas on the structure and hardness of welds was established. the functions for estimating the maximum hardness of the heat affected zone have been also elaborated

References

1. Łabanowski J., Fydrych D., Rogalski G.: Underwater Welding - a review. Advances in Materials Science, 3/2008
Search in Google Scholar
2. Fydrych D., Łabanowski J., Rogalski G.: Weldability of high strength steels in wet welding conditions. Polish Maritime Research, vol. 20 (2013), no. 2, pp. 67-73
Search in Google Scholar
3. Matsunawa A., Nishiguchi K., Okamoto I.: Prediction of cooling rate and hardness of base metal in the underwater welding by local cavity process. Proceedings of the International Conference „Underwater Welding”, Trondheim, Norway 1983
Search in Google Scholar
4. Łabanowski J., Fydrych D., Rogalski G., Samson K.: Underwater welding of duplex stainless steel. Diffusion and Defect Data Pt.B: Solid State Phenomena 183 (2012), pp. 101-106
Search in Google Scholar
5. Fydrych D., Rogalski G.: Effect of underwater local cavity welding method conditions on diffusible hydrogen content in deposited metal. Welding International Vol. 27 (2013), Issue 3, pp. 196-202
Search in Google Scholar
6. Santos V. R., Monteiro M. J., Rizzo F.C., Bracarense A. Q., Pessoa E. C. P., Marinho R. R. Vieira L. A.: Development of an oxyrutile electrode for wet welding. Welding Journal, vol. 91 (2012), no. 12, pp. 319-328
Search in Google Scholar
7. Ghadimi P., Ghassemi H., Ghassabzadeh M., Kiaei Z.: Threedimensional simulation of underwater welding and investigation of effective parameters. Welding Journal, vol. 92 (2013), no. 8, pp. 239-249
Search in Google Scholar
8. Pessoa E., Bracarense A., Zica E., Liu S., Perez-Guerrero F.: Porosity variation along multi-pass underwater wet welds and its influence on mechanical properties. Journal of Materials Processing Technology. Vol. 179 (2006), Issues 1-3, pp. 239-243
Search in Google Scholar
9. Liu D., Zhang H., Yang K., Tang D. Feng J.: Microstructure evolution of HAZ in the multi-pass underwater wet welded joints. China Welding (English Edition), vol. 22 (2013), no. 1, pp. 30-34
Search in Google Scholar
10. Maksimov S. Y.: Underwater arc welding of higher strength low-alloy steels. Welding International, vol. 24 (2010), no. 6, pp. 449-454
Search in Google Scholar
11. Akselsen O. M., Fostervoll H., Ahlen C. H.: Hyperbaric GMA welding of duplex stainless steel at 12 and 35 bar. Welding Journal, vol. 88 (2009), no. 2, pp. 21-28
Search in Google Scholar
12. Pessoa E. C. P., Bracarense A. Q., Dos Santos V. R., Monteiro M. D. J., Vieira L. A., Marinho R. R.: Challenges to develop an underwater wet welding electrode for “class A welds” classification, as required in the AWS D3.6 code. ASM Proceedings of the International Conference: Trends in Welding Research 2013, pp. 259
Search in Google Scholar
13. Mazzaferro J. A. E., Machado I. G.: Study of arc stability in underwater shielded metal arc welding at shallow depths. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 223 (2009), no. 3, pp. 699-710
Search in Google Scholar
14. Zhao B., Wu C., Jia C., Yuan X.: Numerical analysis of the weld bead profiles in underwater wet flux-cored arc welding. Jinshu Xuebao/Acta Metallurgica Sinica, vol. 49 (2013), no. 7, pp. 797-803
Search in Google Scholar
15. AleAbbas F. M., Al-Ghamdi T. A., Liu S.: Comparison of solidification behavior between underwater wet welding and dry welding. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE 2011, pp. 285
Search in Google Scholar
16. Shi Y., Zheng Z., Huang J.: Sensitivity model for prediction of bead geometry in underwater wet flux cored arc welding. Transactions of Nonferrous Metals Society of China (English Edition), vol. 23 (2013), no. 7, pp. 1977-1984
Search in Google Scholar
17. Christensen N.: The metallurgy of underwater welding. Proceedings of the International Conference „Underwater Welding”, Trondheim, Norway 1983
Search in Google Scholar

Articles in this issue

DOI: https://doi.org/10.2478/pomr-2014-0020 | Journal eISSN: 2083-7429 | Journal ISSN: 1233-2585

Journal RSS Feed

Language: English

Page range: 58 - 64

Published on: Jul 26, 2014

Published by: Gdansk University of Technology

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

maximum hardness of the heat affected zone,

welding under water,

dry chamber process

Related subjects:

Engineering,

Introductions and overviews,

Engineering, other,

Geosciences,

Atmospheric science and climatology,

Life sciences,

Life sciences, other

© 2014 Grzegorz Rogalski, Jerzy Łabanowski, Dariusz Fydrych, Jacek Tomków, published by Gdansk University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 21 (2014): Issue 2 (April 2014)