References
- 1. Kijo-Kleczkowska, A., Środa, K., Kosowska-Golachowska, M., Musiał, T. & Wolski, K. (2016). Combustion of Pelleted Sewage Sludge with Reference to Coal and Biomass. Fuel 170, 141–160.
- 2. Kijo-Kleczkowska, A., Środa, K., Kosowska-Golachowska, M., Musiał, T. & Wolski, K. (2015). Mechanisms and Kinetics of Granulated Sewage Sludge Combustion. Waste Management 46, 459–471.
- 3. Kijo-Kleczkowska, A., Łącz, A., Szumera, M. & Środa, K. (2016). Comparative analysis of sewage sludge and other fuels and their mixes, made on the basis of thermogravimetry and mass spectrometry. Rynek energii 2 (123), 111–120.
- 4. Gnatowski, A. & Kazik, E. (2019). The Research of Selected Properties and Structure of Polymeric Material Modified with Hard Coal Ash. Acta Physica Polonica A 135, 119–121.
- 5. Gnatowski, A. & Sosnowski, M. (2018). Effect of PVP and Polybond Compatibilizers on Dynamic Properties of Polymer Blends Analyzed with DMTA. Adv. Sci. Technol. Res. J. 12, 36–40.
- 6. Gnatowski, A., Wawrzyniak, J., Chyra, M. & Palutkiewicz, P. (2018). Examinations of the Effect of Flame Retardants on Thermal and Mechanical Properties and the Structure of Polybutylene Terephthalate. Proceedings of International Conference on Electrical, Electronics, Materials and Applied Science (red.) RAO Venkata, BEN Avinash, BHUKYA Shankar Nayak. American Institute of Physics. AIP Conference Proceedings Vol. 1952, DOI: 10.1063/1.5032055.
- 7. Gnatowski, A., Ulewicz, M. & Chyra, M. (2018). Analysis of Changes in Thermomechanical Properties and Structure of Polyamide Modified with Fly Ash from Biomass Combustion. J. Polym. Environ. 26, 647–654.
- 8. Gnatowski, A., Kazik, E. & Palutkiewicz, P. (2018). Investigation of Properties of Molded Parts Made of Polyethylene with Addition of Ash from Bituminous Coal. Composites Theory and Practice 18, 127–132.
- 9. Madej, D. (2018). Examination of dehydration and dehydroxylation of synthetic layered (oxy)hydroxides through thermal analysis (TG-DSC-EGA-MS) and a discussion to the second Pauling’s rule. Inorga. Chimica Acta 482, 402–410.
- 10. Madej, D. & Kruk, A. (2019). Racing the early and long-term hydration of fast setting cementitious material (Ca7Z-rAl6O18Ca7ZrAl6O18) and calcium aluminate cement (CAC) pastes by means of electrochemical impedance spectroscopy and other methods, Construction and Building Materials 164, 94–102.
- 11. Kornaus, K., Lach, R., Szumera, M., Świerczek, K. & Gubernat, A. (2019). Synthesis of aluminium titanate by means of isostructural heterogeneous nucleation, J. Europ. Ceramic Soc. 39, 2535–2544.
- 12. Plastech (2012–2019). Tworzywa, Plastechopedia, Tarnamid (PA6) – Grupa Azoty, from https://www.plastech.pl/plastechopedia/Tarnamid-PA6-Grupa-Azoty-170.
- 13. Rosato, D.V., Rosato, M.G. & Schott, N.R. (2011). Plastics Technology Handbook. Exeter, Momentum Press.
- 14. Pramoda, K.P. & Liu, T. (2004). Effect of moisture on the dynamic mechanical relaxation of polyamide-6/clay nano-composites. J. Polym. Sci., Part B: Polym. Phys. 42, 1823–1830.
- 15. Xie, S., Zhang, S., Wang, F., Liu, H., Yang, M. (2005). Influence of annealing treatment on the heat distortion temperature of nylon-6/montmorillonite nanocomposites. Polym. Eng. Sci. 45, 1248–1253.
- 16. Hornsby, P.R., Wang, J., Rothon, R., Jackson, G., Wilkinson, G. & Cossick, K. (1996). Thermal decomposition behaviour of polyamide fire-retardant compositions containing magnesium hydroxide filler. Polymer Degradation and Stability 51, 235–249.
- 17. Tomeczek, J. (1992). Spalanie węgla. Wydaw. Politechniki Śląskiej, Gliwice.
- 18. Chomiak, J. (1977). Podstawowe problemy spalania. PWN, Warszawa.
- 19. Kordylewski, W. (2005). Spalanie i paliwa. Of. Wydawnicza Politechniki Wrocławskiej, Wrocław.
- 20. Kijo-Kleczkowska, A. (2008–2010). Research project No N N513 309935. Mechanizm współspalania zawiesinowych paliw węglowo-wodnych z biomasą, (in Polish).
- 21. Kijo-Kleczkowska, A., Gnatowski, A., Szumera, M., Otwinowski, H., Kwiatkowski, D. & Suchecki, Ł. (2019). The effect of addition of coal sludge to polymeric material on thermal effects in analysis by TG/DTG/DSC methods. 6th International Conference Renewable Energy Sources, Krynica, Poland, June 12–14.
- 22. Netzsch. Proven Excellence (2019), from www.netzsch-thermal-analysis.com