References
- Chebak, A., Viarouge, P. and Cros, J. (2010). Optimal Design of a High-Speed Slotless Permanent Magnet Synchronous Generator with Soft Magnetic Composite Stator Yoke and Rectifier Load. Mathematics and Computers in Simulation, Modelling and Simulation of Electrical Machines, Converters and Power Systems, 81, pp. 239–251. doi: 10.1016/j.matcom.2010.05.002
- Chen, T., Zhao, Z., Ming, L., Zhang, S., Ge, Y. and Wang, H. (2024). An Overview of Power Loss Calculation Methods for High-Frequency Litz Wires. International Journal of Applied Electromagnetics and Mechanics, 75, pp. 1–36. doi: 10.3233/JAE-230171
- Du, G., Li, N., Zhou, Q., Gao, W., Wang, L. and Pu, T. (2022). Multi-Physics Comparison of Surface-Mounted and Interior Permanent Magnet Synchronous Motor for High-Speed Applications. Machines, 10, p. 700. doi: 10.3390/machines10080700
- Du, Y., Gu, J., Zhang, H. and Hua, W. (2024). Reliability-Based Robust Optimization of High-Speed PM Synchronous Machine with Local Surrogate Model Strategy. IEEE Transactions on Transportation Electrification, 10, pp. 9679–9690. doi: 10.1109/TTE.2024.3360112
- Feng, L., Liu, W., Chen, X., Ding, Y., Yu, W. and Li, H. (2024). Design and Optimization of High-Speed Permanent Magnet Synchronous Motors. Journal of Physics: Conference Series, 2741, p. 012032. doi: 10.1088/1742-6596/2741/1/012032
- Fernando, N., Vakil, G., Arumugam, P., Amankwah, E., Gerada, C. and Bozhko, S. (2017). Impact of Soft Magnetic Material on Design of High-Speed Permanent-Magnet Machines. IEEE Transactions on Industrial Electronics, 64, pp. 2415–2423. doi: 10.1109/TIE.2016.2587815
- Gan, C., Zhu, M., Li, R. and Lu, B. (2024). Design and analysis of a high-speed PMSG with Litz wire winding technology. In: 2024 IEEE 10th International Power Electronics and Motion Control Conference (IPEMC2024-ECCE Asia), Chengdu, China. pp. 4442–4447. doi: 10.1109/IPEMC-ECCEAsia60879.2024.10567277
- Hamila, R., Chaabane, R., Askri, F., Jemni, A. and Nasrallah, S. (2017). Lattice Boltzmann Method for Heat Transfer Problems with Variable Thermal Conductivity. International Journal of Heat and Technology, 35, pp. 313–324. doi: 10.18280/ijht.350212
- Hu, X., Shi, G., Lai, Y., Wang, L. and Yu, J. (2023). Loss Calculation and Thermal Analysis of High-speed Magnetic Suspension Amorphous Motor. International Journal of Fluid Power, pp. 419–440. doi: 10.13052/ijfp1439-9776.2431
- Huynh, C., Hawkins, L., Farahani, A. and Mcmullen, P. (2005). Design and Development of a Two-Megawatt, High Speed Permanent Magnet Alternator for Shipboard Application. Naval Engineers Journal, 117, pp. 23–29. doi: 10.1111/j.1559-3584.2005.tb00379.x
- IEC 60034-1:2022 | IEC (n.d). [WWW Document]. Available at:
https://webstore.iec.ch/en/publication/65446 [Accessed 18 Oct. 2025]. - IEEE SA - IEEE 1812-2014 (n.d). [WWW Document]. Available at:
https://standards.ieee.org/ieee/1812/4756/ [Accessed 18 Oct. 2025]. - Innovation | Carpenter Technology (n.d). [WWW Document]. Available at:
https://www.carpentertechnology.com/innovation [Accessed 18 Oct. 2025]. - Ismagilov, F. R., Papini, L., Vavilov, V. E. and Gusakov, D. V. (2020). Design and Performance of a High-Speed Permanent Magnet Generator with Amorphous Alloy Magnetic Core for Aerospace Applications. IEEE Transactions on Industrial Electronics, 67, pp. 1750–1758. doi: 10.1109/TIE.2019.2905806
- Ismagilov, F. R., Varyukhin, A. N., Vavilov, V. E., Bekuzin, V. I. and Gusakov, D. V. (2021). System Approach to Electric Machines Development for Aviation Hybrid Propulsion Systems Under Economic Crisis. IEEE Transactions on Aerospace and Electronic Systems, 57, pp. 3768–3781. doi: 10.1109/TAES.2021.3082712
- Jiang, M., Cai, M., Zhou, J., Di, S., Li, X., Luo, Q. and Shen, B. (2023). Superior High-Frequency Performances of Fe-based Soft-Magnetic Nanocrystalline Alloys. Materials Today Nano, 22, p. 100307. doi: 10.1016/j.mtnano.2023.100307
- Kazeem Iyanda, F., Rezazadeh, H., Inc, M., Akgül, A., Mujitaba Bashiru, I., Bilal Hafeez, M. and Krawczuk, M. (2023). Numerical Simulation of Temperature Distribution of Heat Flow on Reservoir Tanks Connected in a Series. Alexandria Engineering Journal, 66, pp. 785–795. doi: 10.1016/j.aej.2022.10.062
- Liao, C., Bianchi, N. and Zhang, Z. (2024). Recent Developments and Trends in High-Performance PMSM for Aeronautical Applications. Energies, 17, p. 6199. doi: 10.3390/en17236199
- Liu, H., Xu, L. and Shangguan, M. (2011). Finite element method simulation of a high-speed wound-rotor synchronous machine. In: 2011 International Conference on Electrical Machines and Systems, Beijing, China, pp. 1–4. doi: 10.1109/ICEMS.2011.6073611
- Metal powders | Höganäs (n.d). [WWW Document]. Available at:
https://www.hoganas.com/ [Accessed 18 Oct. 2025]. - Ning, Y., Liu, C., Jiang, R., Xu, J. and Zhu, S. (2012). A novel tangential radial hybrid excitation synchronous variable frequency aircraft generator. In: 2012 15th International Conference on Electrical Machines and Systems (ICEMS), Sapporo, Japan. pp. 1–5.
- Pasquinelli, M.G., Bolognesi, P., Guiducci, A., Nuzzo, S. and Galea, M. (2021). Design of a high-speed wound-field synchronous generator for the more electric aircraft. In: 2021 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), pp. 64–69. doi: 10.1109/WEMDCD51469.2021.9425625
- Qu, X., Xu, Z., Yao, J. and Zhang, F. (2023). Electromagnetic design and analysis of high speed permanent magnet motor with composite rotor. In: 2023 IEEE 6th International Electrical and Energy Conference (CIEEC). pp. 2593–2597. doi: 10.1109/CIEEC58067.2023.10166977
- Roy, R., Prabhakar, K. K. and Kumar, P. (2017). Core-Loss Calculation in Different Parts of Induction Motor. IET Electric Power Applications, 11, pp. 1664–1674. doi: 10.1049/iet-epa.2017.0369
- SAE International (n.d). Advancing mobility knowledge and solutions [WWW Document]. Available at:
https://www.sae.org/standards/content/arp4990 [Accessed 18 Oct. 2025]. - Shao, L., Navaratne, R., Popescu, M. and Liu, G. (2021). Design and Construction of Axial-Flux Permanent Magnet Motors for Electric Propulsion Applications—A Review. IEEE Access, pp. 1–1. doi: 10.1109/ACCESS.2021.3131000
- Shen, J., Qin, X. and Wang, Y. (2018). High-Speed Permanent Magnet Electrical Machines—Applications, Key Issues and Challenges. CES Transactions on Electrical Machines and Systems, 2, pp. 23–33. doi: 10.23919/TEMS.2018.8326449
- Sirimanna, S., Balachandran, T. and Haran, K. (2022). A Review on Magnet Loss Analysis, Validation, Design Considerations, and Reduction Strategies in Permanent Magnet Synchronous Motors. Energies, 15, p. 6116. doi: 10.3390/en15176116
- Taha, H., Barakat, G., Amara, Y. and Ghandour, M. (2023). An Overview of high-speed axial flux permanent magnets synchronous machines. In: S. Pierfederici, J. P. Martin, eds., Cham: Springer International Publishing, pp. 617–632. doi: 10.1007/978-3-031-24837-5_46
- Talebi, D., Gardner, M. C., Sankarraman, S.V., Daniar, A. and Toliyat, H. A. (2021). Electromagnetic design characterization of a dual rotor axial flux motor for electric aircraft. In: 2021 IEEE International Electric Machines & Drives Conference (IEMDC), pp. 1–8. doi: 10.1109/IEMDC47953.2021.9449611
- Thangaraju, S. K., Munisamy, K. M. and Rajoo, S. (2022). Numerical Investigation on Cooling Performance of Oil Cooled PMSM Jacket Design with Vertical Straight Fin Design. International Journal of Thermofluids, 16, p. 100209. doi: 10.1016/j.ijft.2022.100209
- Tian, Y., Liang, S., Wang, F., Tian, J., Chen, K. and Liu, S. (2025). Analysis of Rotor Lamination Sleeve Loss in High-Speed Permanent Magnet Synchronous Motor. Machines, 13, p. 236. doi: 10.3390/machines13030236
- Torun, H. M. and Swaminathan, M. (2019). High-Dimensional Global Optimization Method for High-Frequency Electronic Design. IEEE Transactions on Microwave Theory and Techniques, 67, pp. 2128–2142. doi: 10.1109/TMTT.2019.2915298
- VAC - Advanced Magnetic Solutions | VAC (n.d). [WWW Document]. Available at
https://www.vacuumschmelze.com/ [Accessed 18 Oct. 2025]. - van der Geest, M., Polinder, H., Ferreira, J.A. and Zeilstra, D. (2015). Design and testing of a high-speed aerospace permanent magnet starter/generator. In: 2015 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles (ESARS), pp. 1–6. doi: 10.1109/ESARS.2015.7101422
- Varyukhin, A. N., Ismagilov, F. R., Vavilov, V. Ye., Papini, L., Ayguzina, V. V. and Gordin, M. V. (2019). Design of 150-kVA 24,000-rpm high-speed permanent-magnet generator for more electric aircrafts. In: 2019 International Conference on Electrotechnical Complexes and Systems (ICOECS), Ufa, Russia. pp. 1–5. doi: 10.1109/ICOECS46375.2019.8949918
- Vavilov, V., Papini, L., Ismagilov, F., Song, S. and Ayguzina, V. (2019). High-Speed Permanent-Magnet Generator with Controlled Magnetic Flux for Aerospace Application. International Review of Aerospace Engineering (IREASE), 12, pp. 290–301. doi: 10.15866/irease.v12i6.17748
- Vijayakumar, K., Karthikeyan, R., Sathishkumar, G. K. and Arumugam, R. (2008). Two dimensional magnetic and thermal analysis of high speed switched reluctance motor using soft magnetic composite material, Hyderabad, India. In: TENCON 2008 - 2008 IEEE Region 10 Conference, pp. 1–5. doi: 10.1109/TENCON.2008.4766454
- Wang, J., Yan, L., Gao, X. and Su, H. (2025). Electromagnetic Thermal Design and Analysis of Aviation Dual Three-Phase Permanent Magnet Machine. IET Conference Proceedings, 2024, pp. 2352–2357. doi: 10.1049/icp.2024.3382
- Wang, W., Fan, J., Li, C., Yu, Y., Wang, A., Li, S. and Liu, J. (2025). Low-Loss Soft Magnetic Materials and Their Application in Power Conversion: Progress and Perspective. Energies, 18, p. 482. doi: 10.3390/en18030482
- Wang, Y. X. and Wang, Y. (2011). Material Properties and Natural Frequency of Stator Core of Large Turbo-Generator. Academy of Management Review, 322, pp. 81–84. doi: 10.4028/www.scientific.net/amr.322.81
- Xing, Z., Wang, X. and Tian, M. (2017). Multi-field coupling analysis of high-speed permanent magnet machine, Sydney, NSW, Australia. In: 2017 20th International Conference on Electrical Machines and Systems (ICEMS), pp. 1–5. doi: 10.1109/ICEMS.2017.8056020
- Zhang, Z., Geng, W., Liu, Y. and Wang, C. (2019). Feasibility of a New Ironless-Stator Axial Flux Permanent Magnet Machine for Aircraft Electric Propulsion Application. CES Transactions on Electrical Machines and Systems, 3, pp. 30–38. doi: 10.30941/CESTEMS.2019.00005