References
- Azar, Z., Zhu, Z. Q. and Ombach, G. (2012). Influence of Electric Loading and Magnetic Saturation on Cogging Torque, Back-EMF, and Torque Ripple of PM Machines. IEEE Transactions on Magnetics, 48(10), pp. 2650–2658. doi: 10.1109/TMAG.2012.2201493
- Barbini, N. and Tessarolo, A. (2019). Concentrated winding electrical machine modelling, design, and optimization. PhD. Thesis. University of Trieste. Available at:
https://arts.units.it/retrieve/e2913fdd-03a8-f688-e053-3705fe0a67e0/Barbini_TesiPhD.pdf . - Brescia, E., Palmieri, M., Cascella, G.L. and Cupertino, F. (2020). Optimal tooth tips design for cogging torque suppression of permanent magnet machines with a segmented stator core. In: 2020 International Conference on Electrical Machines (ICEM). doi: 10.1109/ICEM49940.2020.9270968.
- Dai, Y. and Lee, H. J. (2024). Torque Ripple and Electromagnetic Vibration Suppression of Fractional Slot Distributed Winding ISG Motors by Rotor Notching and Skewing. Energies, 17(19), p. 4964. doi: 10.3390/en17194964
- Han, S. H., Jahns, T., Guven, M., Aydin, M. and Soong, W. (2006). Impact of maximum back-EMF limits on the performance characteristics of interior permanent magnet synchronous machines. In: IEEE Industry Applications Society Annual Meeting (IAS). doi: 10.1109/IAS.2006.256804.
- Hsieh, M. F. and Hsu, Y. S. (2005). An Investigation on the Influence of Magnet Arc Shaping Upon Back Electromotive Force Waveforms for the Design of Permanent-Magnet Brushless Motors. IEEE Transactions on Magnetics, 41(11), pp. 3949–3951. doi: 10.1109/TMAG.2005.854975
- Hu, Y., Zhu, S., Liu, C. and Wang, K. (2018). Electromagnetic Performance Analysis of Interior PM Machines for Electric Vehicle Applications. IEEE Transactions on Energy Conversion, 33(1), pp. 199–208. doi: 10.1109/TEC.2017.2728689
- Jussila, H., Salminen, P., Niemela, M. and Pyrhönen, J. (2007). Guidelines for designing concentrated winding fractional slot permanent magnet machines. In: 2007 International Conference on Power Engineering, Energy and Electrical Drives, Setubal, Portugal, pp. 191–194. doi: 10.1109/POWERENG.2007.4380186.
- Koenigs, M., Kremp, C., Holtorf, J., Harmel, M. and Loehlein, B. (2025). Improving Concentrated Winding Electric Drives Performance: Torque Ripple Reduction Through Non-Standard Stator Slot Numbers. Elektro & Informationstechnik Springer Verlag OVE Wien, Austria.
- Li, Y., Liu, M., Kim, J.H. and Sarlioglu, B. (2017). Torque ripple reduction and mechanical tolerance analysis of a novel dual-stator 6/4 flux-switching permanent magnet machine. In: 2017 IEEE International Electric Machines and Drives Conference (IEMDC), Miami, FL, USA, pp. 1–8. doi: 10.1109/IEMDC.2017.8002329.
- Liang J., Weisheng Jiang J., Yang Y., Al-Ani D., Bilgin B., Sathyan A. (2019). Torque ripple reduction for interior permanent magnet synchronous machines under load excitation by optimizing rotor skew angles. In: 2019 23rd International Conference on Mechatronics Technology (ICMT), Salerno, Italy, pp. 1–8. doi: 10.1109/ICMECT.2019.8932145.
- Parsons, R. (2019). Selecting the best pole and slot combination for a BLDC (PMSM) motor with concentrated windings. Things in Motion Blog. Available at:
https://thingsin-motion.blogspot.com/2019/01/selecting-best-pole-and-slot.html [Accessed 4 Sep. 2024]. - Petrov, I., Hoffer, A. E. and Pyrhönen, J. (2020). Reduction of torque ripple in synchronous machines by quasi-skew-asymmetric rotor. In: 2020 International Conference on Electrical Machines (ICEM), Gothenburg, Sweden, pp. 298–304. doi: 10.1109/ICEM49940.2020.9270931.
- Suriano-Sánchez, S. I., Ponce-Silva, M., Olivares-Peregrino, V. H. and De León-Aldaco, S. E. (2022). A Review of Torque Ripple Reduction Design Methods for Radial Flux PM Motors. Eng, 3, pp. 646–661. MDPI Electrical and Electronic Engineering doi: 10.3390/eng3040044
- Tessarolo, A., Ciriani, C., Bortolozzi, M., Mezzarobba, M. and Barbini, N. (2019). Investigation into Multi-Layer Fractional-Slot Concentrated Windings with Unconventional Slot-Pole Combinations. IEEE Transactions on Energy Conversion, 34(4), pp. 1985–1996. doi: 10.1109/TEC.2019.2929950
- Toporkov, D. and Vialcev, G. (2017). Impact of Equalizing Currents on Losses and Torque Ripples in Electrical Machines with Fractional Slot Concentrated Windings. IOP Conference Series: Earth and Environmental Science, 87, p. 032047. doi: 10.1088/1755-1315/87/3/032047
- Totoki, E., Yamaguchi, S., Tanaka, T., Ito, K., Daikoku, A. and Morimoto, S. (2022). Torque Ripple Reduction for Permanent Magnet Motor Using New Configuration for Concentrated Windings. IEEJ Journal of Industry Applications, 11(3), pp. 531–537. doi: 10.1541/ieejjia.21001247